-
Connect the network port of a computer to the LAN port of the router, and set the IP address of your local machine.
In short, it is in the same subnet as the router remote login address).
Enter the remote login address of the router (on the back of your router, generally if it is not right, you can go to the Internet to search for the default remote login address of the router you use) The default username and password is: adminAfter entering the router web settings page, set the WAN port to a static IP, and then enter yours.
DNS as your gateway.
For example, the LAN port is set up as a gateway for a desktop (laptop).
Your two machine settings are:
Machines machines. If it's a wired connection, you plug the network cables of both machines into the LAN port of the wireless router.
If it's a wireless connection, you can set the ESSID and turn on the DHCP function to automatically get the IP address.
The DHCP function settings are as follows:
DHCP Server: Enabled.
Gateway: Primary DNS Server:
-
Install it and go straight to it! Dizzy.
The problem is that your tp-link is more than dual interfaces.
-
Buy a router and you can connect four.
-
limited, the number of signal grids should be strong.
The reason for the other party:
Here comes the new network management: 1. People may have set a password, the password is wrong, re-enter.
2. Routing setting issues.
IP address filtering or MAC physical address filtering.
3. Their network is disconnected, in arrears or there is a problem with the line.
Your reasons: 1. Clear your Wi-Fi information, ie.
Right-click on "Wi-Fi Connection" -- Properties -- Wi-Fi Configuration, delete all the networks (in fact, delete the password and other information you saved), and then re-open the Wi-Fi to search for available connections, connect to the network you want to use, and re-enter the key (if you knew before, if the password is empty, then don't use it, you see if there is a lock icon 0.
2. If you are poisoned, check the poison. Recall what you did on your computer before you couldn't connect.
Solution: Find a software to crack the password wifi or wlan (be patient, it's not easy to d), or enter the hotel, say you are a guest, and inadvertently ask for the password.
-
That's not assigned an IP address, and the hotel restricts the Internet. It should be that they are bound to the MAC address, even if you have their wireless password (that is, it is not encrypted), you can't use their wireless. That's why your machine is restricted.
There is also a solution, find a way to get the MAC address of one of their computers, and change the MAC address of your computer.
-
Did you use the hotel's internet before?
First, take a look at the local connection properties of the computer that can access the Internet and look at the IP settings. If it is automatic acquisition, then the computer next door is also set to automatically obtain it; If you set a specific value, for example, then the computer next door also sets a value adjacent to it, for example, for other items.
The host needs two network cards, after the host is connected to the Internet, one end of the twisted pair is connected to the host network card, and the other end is connected to the switch, and then a twisted pair is found, and the switch is connected to the computer.
Connect both computers to the switch at the same time.
At the time of IP setting, set the IP of A to. >>>More
These two games are not very good, it is recommended to buy a desktop one, 5000+ can buy a very good machine.
The first method is a bit complicated, if you find it troublesome, use the second one. >>>More