How to separate the Internet speed of two computers What software to use to limit the Internet speed

The role of a router is to form your two computers into a local area network, which is then connected to broadband through a port.

As a result, the two computers share a 2M bandwidth.

If one computer is surfing the Internet and generating upload traffic for x1 and ** for x2, and the other computer is also generating upload traffic for y1 and ** for y2, then it may be as follows:

64 kps, x2+y2<256 kps: In general, the network will not have much impact on the network, but if the total number is close to the maximum value, the network latency may increase.

or x2+y2=256kps: At this time, the network is basically completely blocked and nothing can be done.

The reasons for the high flow are generally:

Upload traffic: BT, Thunderbolt, file transfer.

His own friend, easy to talk to.

On the home network, as long as someone uses P2P software, others can't open the web page.

Discuss with your friends, don't turn on online TV when you go on together. When you're alone, it doesn't matter how you want to drive.

P2P can be restricted, and I use that in my dorm.

1. Click to open PC Manager;

2. Click the Toolbox button on the lower right corner of the PC Manager page.

3. Then find Traffic Monitoring on the page and click on it;

4. Then you can see all the software network usage in the traffic monitoring window.

6. There is no restriction on entering 0.

To complicate matters further, you can set up your router with the help of other software to distribute the bandwidth evenly.

Remote control software commonly used by programmers, which can control other people's computers, is recommended.

To limit the speed of another computer, there are generally the following methods, specific steps:

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

<>5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Set your computer to a fixed IP, such as:

Turn on the router, QoS bandwidth settings. It depends on your broadband speed, take 4m as an example.

Set and uplink speed 150, uplink speed 20, don't be too low, don't be too selfish.

This can be set up in the router.

Buy a wireless router with mesh belt control.

See if there is a setting on your router that limits the speed.

The wireless network point can be set up.