Only one speaker rang on my computer s speaker, and I don t know if it s a problem with the speaker

My jack is also broken.

You try not to plug it all in.

Mine doesn't plug in to make both of them ring.

It should be exchangeable.

The jack is plugged into the sound card through a wire and the socket at that end.

Some have no language for you.

There are only three holes in the source socket: line out line in mic in, the first one is the output, the second is the input, and the third is the microphone.

As long as you have a sound, it's not that the hole is broken.

That's because you left the sound settings on point and didn't restore them.

You double-click on the small speaker (volume) in the bottom right corner

Move the balance of the volume control to the middle.

There are voices on the left and right.

My subwoofer also appeared as you said,But there is absolutely no problem with the speaker and data cable, it is the problem of the jack,It may be that the sound card jack integrated with my motherboard is aging,You plug in a few more times to see,If it still doesn't work,You can buy a sound card,The sound card is not expensive,I'm disappointed in my sound card now,I'm ready to buy a sound card,After all, there is one less speaker that can make any sound?,It's not cool to listen to songs or anything。 If you're fixed, tell me how to fix it!

The speaker is plugged into the green hole of the host, the green hole is the audio output, and the speaker, headphones, etc. are plugged into the green port. Red and blue are the two positive poles of the channel, blue and red are the conventional impedance input, and the ordinary amplifier is connected to red and blue.

Audio use note:

1. Don't put ** on the loudest sound. The speaker of the sound is very fragile. He can accept the normal sound of the sound, but if the sound is turned up to the maximum, it will affect the life of the sound speaker.

2. Use it in strict accordance with the content of the manual. Improper use can shorten the lifespan of the audio. Do not place the audio on the side of the table to prevent damage from the sound.

The sound is very fragile, and accidentally falling in the air can damage the acoustic paint. Therefore, it is important to pay more attention when shooting sound.

3. Before buying, you must first look at the audio brand, and it is best to go to the regular shopping mall and audio store to choose to buy. Manufacturers of ordinary brands have strict requirements in terms of design and quality, while some miscellaneous products are not guaranteed in terms of quality, the sound quality is not good, and the sound produced is difficult to hear before it is pure. <>

Answer:1Check the connections: First, make sure that all the connections to the speaker and the computer are plugged in correctly. Check that the audio cable is securely connected and make sure the plug is plugged into the correct audio output.

2.Adjust the volume setting: On your computer, check that the volume setting is correct. Make sure the volume isn't muted and that the volume slider is set in the appropriate place.

3.Check Device Manager: Open Device Manager to see if your audio device is working properly. If there are any issues or warning signs, try updating the driver or reinstalling the audio device to burn the draft. Qi Yu.

4.Test other devices: Plug your speaker into another device, such as a phone or *****, to determine if it's a problem with the speaker itself. If the speaker sounds properly on other devices, the problem may be on the computer.

5.Try a different audio output: If your computer has multiple audio outputs (e.g., front and rear panels, headphone jacks, etc.), try connecting speakers to other connections to see if they can sound out.

Summary: If only one of your computer speakers can make sound, the workarounds include checking the connection, adjusting the volume settings, checking the Device Manager, testing other devices, and trying other audio output interfaces. If the problem persists, it may be necessary to investigate further or seek professional technical support.

2.Double-click Speakers

Only pick 3Select the "Levels" tab and click "Balance".

4.At this time, you can adjust the left and right channels of Li Qiyin.

If only one of your computer speakers can make sound, it could be due to the following reasons:

1.Incorrect volume adjustment: You need to check the volume settings of your computer to see if there is any mute or low volume. You can adjust the volume or cancel the "mute" state at the speaker icon in the lower right corner of the computer desktop.

2.Check the audio output device settings: You need to check the audio output settings of your computer to confirm whether the left and right channel settings are correct.

On Windows, you can check the status of your device in Control Panel - Sound to see if the correct output modelling device, format, and audio channel are selected by default.

3.Replace the audio cable or audio interface adapter: If the cable between the computer and the speaker is loose, broken, or incorrectly connected, only one speaker can produce sound.

4.Check the speaker itself:If the audio settings of the computer are correct,The speaker itself is not damaged,You can check the speaker cable,Confirm whether the left and right channels are reversed or one of the connection cables out of the hall is abnormal。

5.Check your computer's sound card: If none of the above methods work, you need to check if there is a problem with your computer's sound card. If there is a problem, you need to go to a professional maintenance and after-sales service center to repair or replace the sound card.

In short, if there is only one case where the computer speaker can make sound, you need to eliminate the problem one by one according to the above steps, find the cause and deal with it accordingly.

Let's see if the horn is broken. You can plug in the R L connector with a loudspeaker. If it all rings, the horn is broken.

The useless one is the microphone's!

First, first confirm that the hardware is fine. If there is nothing wrong with the speaker, there is no problem with the sound card.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

Let's take a look at whether the volume balance is in the middle, and then see if the audio line is connected, and there is a good swap to determine whether it is a problem with the speaker, if the speaker is broken, it can only be repaired or replaced.