I don t know why my computer can only be turned on by pressing F1 when it is turned on

Updated on amusement 2024-04-09
7 answers
  1. Anonymous users2024-02-07

    You need to press the F1 key to enter the boot, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations:

    1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue.

    2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but later forgot to change the BIOS settings back when I removed one of them, which will also cause this problem.

    3. If the motherboard battery is out of power, it will also cause data loss, which will cause this failure.

    4. Reboot the system, enter the BIOS settings, and find that the floppy drive is set to, but in fact there is no floppy drive in the chassis, set this item to none, troubleshooting.

    To turn off this disturbing prompt, you can go to boot--boot configration and wait for"f1"If error is set to disableSave the reboot and the problem is solved.

    PS: Specifically: boot into the BIOS, set your hard disk parameters, if you don't know, change to automatic check, generally autodetect; It's also possible that the floppy drive is set to inches in the BIOS, when in fact you don't have a floppy drive at all, and drive A is set to none

    Go to the boot item, there is a boot configration in it, and find something like wait for"f1"If error, set it to disable to avoid prompts.

    There is also the need to restore the default settings, usually by going to the BIOS and selecting Load Fail-Safe Defaults or Load Optmized Defaults

  2. Anonymous users2024-02-06

    Go to the BIOS settings and wait for"f1"If error is set to disableSave and reboot and set the floppy drive to none. It should be fine.

  3. Anonymous users2024-02-05

    There is a problem with the settings in CMOS, or try a new battery on your BIOS.

  4. Anonymous users2024-02-04

    Pressing F1 doesn't actually pull anything, it's to check your floppy drive. You can change the BIOS battery and enter the BIOS before booting the computer

    standard

    CMOS: At this point, you can see DRVE

    A: You just turn this off and you're good to go! This one is very simple.

  5. Anonymous users2024-02-03

    Restart the computer, press F8 to enter safe mode, and enter the first item at the top of the left column to find but [drive

    a] Turn it off and press F10 to save and exit.

  6. Anonymous users2024-02-02

    Boot and press F1 to start to enter the system fault analysis and solution computer fault description:

    It will be prompted every time it is turned on.

    And you must press the shortcut key F1 before the computer can start normally.

    Reasons and solutions for secondary failures:

    1. The battery on the motherboard is dead.

    Solution: Replace the motherboard battery.

    2. You have set up the floppy drive to start, but there is a problem with your floppy drive.

    Solution: A. Press del to enter the BIOS at boot, boot up the boot sequence, and turn off the floppy drive to boot.

    b. Turn off the detection function of the floppy drive when it is turned on

    Start the computer and press the [DEL] button to enter the main BIOS settings interface.

    Select "Advanced."

    biosfeatures", press the enter key to enter;

    Add "boot

    upfloppy

    seek" is set to "disabled", so that the boot software detection function can be turned off, and there is no need to press F1 to start it in the future.

  7. Anonymous users2024-02-01

    Turn on the power and press the del button to enter the blue screen state, and then press F10 Enter to start again!

    If it doesn't work, the lithium battery on your motherboard is dead, just replace it!

Related questions
7 answers2024-04-09

It is really difficult to cure a fish disease, because the constitution of the sick fish is very weak, and the fish disease will be more serious if the medicine is not used properly. Fish diseases are mainly caused by long-term poor water quality, just like people, if they live in an environment with bad air for a long time, they are also easy to get sick. Keeping the water stable and clear is a key issue if you want your fish to be healthy and disease-free. >>>More

9 answers2024-04-09

Why does your boyfriend know your whereabouts, how does he do it He and you work in the same place, or she and you often take the same route, or he sees you walking at night or during the day, secretly following you, or it may be someone else told him, or your girlfriend told him, your friend told him, he can know your whereabouts. But it should be good to know your whereabouts to protect a boyfriend like you, so don't worry too much, if you don't like this, you can talk to her, because everyone has their own privacy, right?

24 answers2024-04-09

Pisces Horoscope for October.

Overall Transport: >>>More

4 answers2024-04-09

Self-confidence is in ability, because you usually work hard, you are not stage frightened during the exam, and you are confident, so you can hold your chest high, as if nothing happened, calm and comfortable. >>>More

22 answers2024-04-09

Maybe she thought about what you would do with her before she even spoke to you! She thinks that's the perfect thing she wants. But yours is too far from what she imagined, or simply unreliable! >>>More