-
Whether it can be used normally from the safe mode, if it is normal, it is a hardware problem, and if it is abnormal, it may be a system problem;
Check for toxicity first.
-
Causes of black screen caused by computer host failure: You can analyze the following aspects to find the cause of the failure and take corresponding countermeasures.
1.The power supply is causing a failure. - The power supply is damaged, the quality is not good (miscellaneous), the load is overloaded (e.g. new hardware is added, the power of the graphics card is too small), Replace high-power high-quality brand power supplies (Huntkey, Great Wall, Big Buffalo, Kangshu).
2.Motherboard (CMOS parameters of the motherboard) - Memory, graphics card and other accessories are of poor quality or damaged, and are replaced by the replacement method.
3.The quality of the connection between the accessories,—— the poor contact between the power cord and the socket, the incorrect, loose, and poor contact between the memory, graphics card, etc. and the motherboard. The connection between the graphics card and the monitor, the power socket is broken, and the data cable of the hard disk and optical drive is reversed.
Memory, overclocking issues. - Overclocking, overclocking hardware that is not suitable for overclocking, and damaging the hardware.
5.Poor heat dissipation - overclocking, bad fan, poor quality, high temperature system self-protection crash.
-
This is more complicated, it can cause a lot of situations like this, some things are software, but some things are hardware, if you really can't see the ** signal on the monitor, first open the chassis to clean up the dust, check the appearance of the components, if it's okay, just plug and unplug the graphics card power cord If this is not good, you have to send it to the computer city What is the topic in the secret I Our slogan is not to abandon and not to give up Hehe.
-
Your hard drive probably has a physical bad sector, and the power supply is too low when you are carrying out a large amount of data throughput! Listen to me check the hard drive and then the power! There is no escaping these two questions.
-
Beep memory should be fine.
-
If the memory is not in good contact, unplug the memory and plug it in again, and clean up the dust in the computer host!
-
Change the silicone of the CPU to see if there is a lot of dust, and then look at the memory module, use a clean paper towel, preferably wipe it clean with an eraser, try it, if you can, it's best to take it to the place where the computer is repaired, and see if there is a problem.
-
How much memory? How much space is left on the C drive?
Right-click the taskbar to open the task manager, look at the process CPU, whether the memory occupies a particularly high level, maybe it is poisoned.
-
If you want to use the machine, take off the CPU, add some silicone to the fan and the middle of the CPU, and the silicone should be evenly proportioned. It's time to clean up the dust, and other places to clean up the dust, CPU fans, power supply fashion, etc. Then it should be good to redo the system.。。
-
The motherboard needs to be set up, or the system should be reinstalled.
-
Friend, the computer freezes, the solution, has the following aspects:
1。Restart the computer, after the computer brand is out, press F8, Safe Mode, the last correct configuration, Enter, Enter!
2。Software conflicts, incompatibilities: redundant similar software installations! The computer is overclocked or there is too much software installed, and the system memory is insufficient!
360 Butler, Software Uninstall, Find Uninstall, Again: Powerful Cleaning!
Or: Start Menu, Programs, Find Excess Software Uninstalled!
3。The computer system is interfered with by stubborn viruses and Trojans or worms, or you have lost your system files!
360 system first aid kit, start first aid, after finishing, restart the computer!
After booting up, click on: suspicious startup items and Trojans, delete files completely!
Again: , Select All, Fix Now! to start the repair. Restart your computer!
Antivirus, Full Scan, Quarantine, Trojan and Suspicious Viruses, Point: Completely Removed!
5。Do it when necessary: restore the system or reinstall the system with one click!
6。Hardware problems, hard disk or motherboard or fan problems, send it for repair!
Hope it helps you a little.
-
The hard disk is broken, or the memory is dusty, replace these two to try, my computer used to be like this, and it will be fine after replacement.
Hello, Microsoft MVP members have answers for you!
If the num lock key is reflected, it means that your computer is faked, and if it is really dead, your key is not reflected. >>>More
CPU temperature is too high Replace a high-powered fan Keep the room well ventilated The power supply voltage is unstable Buy a voltage regulator or UPS power supply Too many programs open Memory is heavily occupied Close unnecessary programs under msconfig End unnecessary programs Low CPU or memory configuration (Replace CPU to add memory) There are logical or physical bad sectors in the hard disk (find a professional to repair or replace) There is a virus Let's kill it Too many junk files Too many fragmented files ** Optimize the software, optimize it (Windows Optimizer or Super Bunny, etc.) System Problems Reinstall the system There are compatibility issues with hardware and software The BIOS settings are incorrect Resetting the BIOS Dust and moisture are to blame Clean up the chassis and keep the inside dry and clean.
Your problem should be that there is a problem with your hard drive. Unless the hard drive and motherboard are not compatible. You set the hard drive to a compatible IDE mode and see. When your hard drive is installed on another machine, the blue screen is caused by the driver in your system and the driver in someone else's machine does not match the number.
How to restart a computer when it freezes.
C disk space less crash will not, but it will make your computer respond slower (if your virtual memory is set in C disk), there are many problems with frequent crashes, have you recently added memory (may be caused by memory incompatibility) or change what hardware or something, if there is something that may be incompatible or add something to cause insufficient power supply. Of course, it could also be a virus, or it could be that the CPU fan is broken and the speed is slow. If none of the above is true, reinstall the system.