If the OPPO phone presses the power button and the volume button at the same time for more than 8 se

There are two phenomena of vibration on startup, and it cannot be turned on after vibrating all the time after booting, it is recommended to press and hold the power button for 10 seconds, and then try to restart the machine. If you still can't turn on the phone, it is recommended that you bring the purchase invoice and warranty card and send it to the OPPO customer service center for testing and processing.

The following types of mobile phones are common when they do not turn on:1There is vibration and it cannot be turned on2Completely unresponsive when powered on3Do not boot during the upgrade process4Stuck in the OPPO interface and can't turn on.

Measures: If your mobile phone can't be turned on, you can connect the original charger to charge for half an hour, and then press and hold the power button for 10 seconds to check whether it turns on.

If your phone can't be turned on when you upgrade it, it is recommended to try it by following the steps below: enter the OPPO official website to re-upgrade the firmware package; Bring your mobile phone to the OPPO customer service center for processing.

If the smartphone is stuck in the boot animation interface during use, it is recommended to try to press and hold the power button for 12 seconds to force it to shut down, and then restart the phone; If your problem cannot be solved, please bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing. If the phone can be turned on normally after restarting, it is recommended to optimize the phone as follows: uninstall the recently installed software to rule out the incompatibility between the software and the system; Caused by battery feeding, it is recommended not to completely deplete the power, and charge it in time if it is less than 20%.

If the system is unstable due to system abnormality or root, flash the system as soon as possible to repair it.

After the oppo phone presses the power button and the volume + key at the same time, it can no longer turn on. Long press the power button for ten seconds and there is no response?

Hello dear, glad to answer for you! The solution to the OPPO phone that can't turn on after pressing the power button and the volume button at the same time is:1. Restart the phone:

Press and hold the power button for about 10 seconds until the phone automatically shuts down, then press the power button to turn on the power button to see if it can turn on normally. 2. Check the battery level: If the battery of the mobile phone is too low, it will not turn on, you can connect the mobile phone to the power adapter to charge for a period of time and then try to turn it on.

3. Check whether the keys are damaged: long-term use will cause damage to the keys of the mobile phone, if the keys are damaged will cause the phone to not turn on, you can try to clean the buttons, or replace the damaged buttons. 4. Restore factory settings

If the above search methods can't solve the problem, you can try to factory reset your phone, but this will erase all data in your phone, please back up important data in advance. The specific operation method is: when the phone is turned off, press the volume plus button and the power button at the same time to enter the recovery mode of the OPPO mobile phone that is leaking, select "Clear data and restore factory settings", and then restart the phone.

Take the oppo phone as an example, the operation is as follows:

1. Turn on the [Settings] function on your phone;

2. After opening [Settings], swipe down on the page until you find [Sound & Vibration] and click to open it;

3. Then swipe up on the page.

4. Finally, slide [Touch Mode Vibration] left to turn off.

Vibrate this feature by turning off touch. In the case of OPPO A5, the steps are as follows:

1. Directly on the desktop of the mobile phone, click to open the settings window.

2. If there is no problem, find the icon item and select to jump.

3. At this time, continue to pull down the menu.

4. In this way, it will be determined to cancel the relevant object, and the requirements can be realized.

1. Open your phone's settings.

2. Select "Sound".

3. Pull to the bottom and there is a "haptic feedback", just turn it off.

1. Turn on the [Settings] function on your phone;

2. After opening [Settings], swipe down on the page until you find [Sound & Vibration] and click to open it;

3. Then swipe up on the page.

4. Finally, slide [Touch Mode Vibration] left to turn off.

Note: This operation is applicable to ColorOS7 and above.

Set the Sound Vibration system to the vibration ...... when touching is turned offMobile phones are different, not exactly the same.

Vibrate this feature by turning off touch. In the case of OPPO A5, the steps are as follows:

1. Directly on the desktop of the mobile phone, click to open the settings window.

2. If there is no problem, find the icon item and select to jump.

3. At this time, continue to pull down the menu.

4. In this way, it will be determined to cancel the relevant object, and the requirements can be realized.