When is the most appropriate time to remove the protective film of the aluminum gusset?

It's best to remove it before you install it. Because the protective film of the aluminum gusset, as the name suggests, is to protect the aluminum gusset plate, so it is pasted to prevent the surface of the aluminum gusset from being worn and damaged during transportation.

The protective film should be torn off after decoration because there is formaldehyde, so don't leave it for too long.

Generally, it can be removed a few minutes before installation, and the film is to not damage the aluminum gusset.

Try to tear it off as soon as possible, because it will not be able to tear off after too long, and it will be very laborious.

When is the most appropriate time to remove the protective film of the aluminum gusset, it is best to remove it after decoration.

After removing it during the renovation, you can just wipe it hard, or it won't take a lot of effort.

It should be appropriate to wait for the decoration to be completed and cleaned up before removing the protective film.

You can freeze it in the refrigerator and you can remove it quickly.

I usually remove the protective film of the aluminum gusset before installation.

Because it will be difficult to leave it for too long.

Otherwise, you won't be able to tear it off.

Find the two ends of the disconnection and gently pull it apart, blow it with a hair dryer along the horizontal direction of the film (that is, the direction that should not be broken), just heat it slightly, lift the two ends with both hands and pull it down lightly (the force should be even, don't pull it off), and if the area is large, blow and pull it section by section.

The selection of aluminum-plastic panel surface protective film should be carried out by the user unit to determine the viscosity of the selection, to determine whether the adhesive of the surface protective film is suitable for the surface coating of the decorative material, because the adhesive of the surface protective film is not a universal self-adhesive.

Introduction

1. According to the material of paint coating, aluminum-plastic panels can be divided into two categories: polyester aluminum-plastic panels and fluorocarbon aluminum-plastic panels, each of which can be roughly divided into metallic paint and non-metallic paint. Due to the difference in paint material and structure, different requirements are also put forward for the thickness and viscosity of the protective film glue.

2. In the process of use, if the glue nature of the protective film is not selected properly or the glue quality is unstable, it will bring many problems to the user, such as not sticking, warping or not tearing off within the shelf life after sticking.

3. The viscosity of the surface protective film should be determined according to the smoothness of the surface of the material, the surface of the material is smooth and smooth, the viscosity of the protective film should be low, the surface of the material is rough, the particles on the coating surface are relatively coarse, and the viscosity of the protective film should be high. On the contrary, if you choose to use it improperly, it will produce the phenomenon that the paste is not firm or the paste is too firm and cannot be removed.

The protective film on the board is not easy to peel off. Wooden sticks can be used. Tear a hole.

Roll it up with a stick and roll it down slowly! This allows you to roll down the whole piece. If it's a small slice, you can grill it over a fire.

Or glue it with clear glue. It's thicker, so there's a first tear off.

The protective film of the aluminum-plastic panel is not easy to tear, it is generally too thin, and it is difficult to tear it after a long time, it is recommended to use hairspray to tear it off after hardening, do not use the water of the day, it will have a chemical effect, I hope it can help you.

Take the blade and gently scratch a little bit, and a trace of tear will be all down, and it won't be so hard to tear, and a better one should be very good to tear, or it won't be designed like that, and it's not easy to tear, maybe it's inferior.

High-power hot air grab! Roast! Or a high-power hair dryer! Blow! And there's an extreme way: Is your door cold? Keep it in a cold place and freeze overnight (not recommended!) It's annoying to disassemble! ）

Take warm water, wipe with a handkerchief, and if you really can't use an eraser.

Buy some rosin perfume, very cheap, only need two or three yuan, get it on a towel, and then gently scrub it on the aluminum-plastic panel, and then tear it, so that it is easier to tear

If you buy aluminum-plastic panels in less than 45 days, go directly to the manufacturer and provide invoices for them to compensate you for your losses.

Pay attention to the direction of use, generally 180 degrees is the lightest, and it is best to tear it, that is, pull up the protective film, and use your hand against the aluminum plate in the opposite direction.

Apply it to the protective film with wind oil essence, and tear it off as soon as the film is dissolved.

Defined in foreign countries, there are many names of aluminum-composite panels, some are called aluminum composite panels; There are called aluminum composite materials; The world's first aluminium composite panel was named Alucobond. There are not many foreign companies that produce aluminum-plastic panels, but the production scale is very large. Famous ones include Alusuisse headquartered in Switzerland, Reynolds Metal Corporation of the United States, Mitsubishi Corporation of Japan, and Daming of South Korea.

Taiwan's auspicious, mainland China's famous enterprises include Jiangxi Yalitai, Huatian Aluminum, Shanghai Huayuan, Ningbo Aijia Building Materials, etc.

Aluminum-plastic panel] is composed of two materials (metal and non-metal) with completely different properties, which not only retains the main characteristics of the original composition materials (metal aluminum, non-metallic polyethylene plastic), but also overcomes the shortcomings of the original composition materials, and then obtains many excellent material properties, such as luxury, colorful decoration, weather resistance, corrosion resistance, impact resistance, fire prevention, moisture resistance, sound insulation, heat insulation, and earthquake resistance; Light weight, easy processing and molding, easy handling and installation. Therefore, it is widely used in a variety of architectural decoration, such as ceilings, columns, counters, furniture, pavilions, elevators, storefronts, billboards, plant wall materials, etc., has become the representative of the three major curtain walls (natural stone, glass curtain wall, metal curtain wall) metal curtain wall, in developed countries, aluminum composite panels are also used in the manufacture of buses, train cars, aircraft, ship sound insulation materials, design instrument boxes, etc.

Composed of aluminum-plastic panels.

The aluminum-plastic composite panel is composed of multi-layer materials, the upper and lower layers are high-purity aluminum alloy plates, and the middle is a non-toxic low-density polyethylene (PE) core board, and a protective film is pasted on the front. For the exterior, the front of the aluminium composite panel is coated with fluorocarbon resin (PVDF), and for the interior, the front side can be coated with non-fluorocarbon resin.

If it works, how can it not be torn off.

Decoration is really a particularly grinding thing, from hard decoration to soft furniture, it took us a lot of time and energy, and it also cost about 200,000 yuan before and after. Fortunately, everything is a good result, our home American style decoration, during which I added a lot of ideas, so in the end it was a bit of a mix, friends came to visit are full of praise, especially the tiles, very unusual. Let's take a look at the decoration

In the living room, fabric sofas, chandeliers, and wall paintings are all very simple.

There is a large balcony outside the living room and we deliberately chose white curtains which had a hazy feel.

The balcony did the interior effect, bought a storage shelf back to decorate the small greenery.

The TV background wall and warm wallpaper are both warm and fresh.

The dining room, with solid wood dining tables and chairs, looks calm and atmospheric. There is a literary feel on the wall, especially the three-dimensional elk paintings.

In the kitchen, the overall cabinetry is custom-made, and the effect is very good.

In the master bedroom, we chose dark solid wood furniture, which looks like a retro style, and the wallpaper is also floral, which is very beautiful.

Because I am looking for a whole house customization, the cabinets at home are all integrated, the style is very consistent, and the workmanship is also very exquisite.

Children's room. <>

Study tatami mats.

The bathroom, sink and toilet are separated so that it doesn't get wet and doesn't smell bad.

Toilet.