May I ask you how to make the font bold in CAD? The people who know say that the next ha, the cut is

Double-click to start, select the text field you want to bold, and then Ctrl+B.

He doesn't say how it should be written.

Bend the bow and shoot the arrow.

And back, like the dawn and the sunset.

Now you become my weary and my failure.

When the gloomy high-rise building arrived, he thought there was no wave haha.

There is no way to make the font bold. It can only be a different font.

1. If you have a bold font on that picture, it is easy to do, you can use the format brush, brush the font with thin strokes to be the same as that font, it doesn't matter if the size is different, you can adjust the font height or font size in the attribute (large) The format brush is a shortcut key ma.

2. If on the same picture, the fonts are all fine strokes, then you can search the CAD font library on the Internet and then ** (normally speaking, CAD itself comes with a lot of fonts, some are thin and some are thick, and there are English Shenma), put the **down file, put it in the corresponding font folder on the CAD installation disk. Then, you insert the text into the CAD and choose a bold font.

3. In addition, there is this situation, that is, you select the font that needs to be bolded, right-click to find the general attributes, adjust the text line width, and print the preview while adjusting. It is usually not recommended, because if you adjust the line width, it is a fixed value, that is, it is very clear and normal when you print it as A2, but if you print it as A4, then the word you bold will be unusually black, unusually bold ......）

Do you feel like a lot of people are asking this question lately? Are you all students in the first year? Why don't you search on the web page before asking, and many of the answers are ......I've said this question several times.

First open the drawing file, then disassemble the finger in the drawing to find and double-click the text that needs to be bolded.

If you feel that it is still not bold enough, you can modify the text to a thicker font, such as: Alibaba Puhui Ti.

b. Founder bold, etc. The renderings of Alibaba Pratt & Whitney B are shown in the figure below

Or in the [Text Format] dialog box, the value of the CAD font width factor is increased, and the final effect is as follows:

In CAD, the input text is generally relatively thin by default, but some graphics need that bold effect. Next, I have carefully sorted out some relevant information about bold CAD text for your reference.

Again, enter the command "ed" to select the text you want to bold.

Click on the text format pair with the band in the box"b"The icon of the word can be reversed and bolded. After processing, press the confirmation button to complete.

1Select the text, click the b button (bold), the text will become bold, click the b button again, and the text will change back to its original state.

2.Choose a different font, such as bold font with bold text, etc.

If there is text that looks bold, this is to show the importance setting. The next calendar is some relevant information on how to bold the text in CAD for your reference.

Again, enter the command "ed" to select the text you want to bold.

Click on the text format pair with the band in the box"b"The icon of the word state can be bold in antitext. When the processing is finished, press the confirm button to finish.

Knowledge Expansion: CAD Filling Methods for Monochrome1. Enter the command bh, and dig the limb tracks.

2. Select the gradient color fill in the dialog box, select monochrome, and mix the color.

The slider is moved to the middle position.

3. Select a color tile and you can fill it.

Tools Materials: Computer, CAD software.

The steps to adjust the font size in CAD are as follows:

1. First of all, open the CAD software on your computer and click "Multi-line Text" on the toolbar on the page.

2. Click on the area and press down with the mouse to pull out the rectangular box.

3. Enter the required content in the box.

4. After input, select Chinese characters, click the mouse, and select the "Text Height" column in the pop-up dialog box to set the value to be larger or smaller, which can be adjusted as needed.

5. After the adjustment, the font in the CAD software will be adjusted, and the problem of adjusting the font size in CAD will be solved.

The specific steps for adjusting the font thickness of CAD are as follows:

The materials we need to prepare are: computer, CAD.

1. First of all, we open the required CAD file, click on the command bar in the lower left corner and enter "ED", and then select the text to be adjusted.

2. Then we click on the width factor in the lower right corner of the pop-up window and enter the value we want to adjust.

3. Then we click on the window and select "OK" in the upper right corner.

Material Tools: CAD

1. Enter the text modification command "ed, ddedit to activate the text dialog box. Or double-click the left mouse button to activate the dialog box.

2. Select the object you want to annotate, and the text modification dialog box will be opened.

3. Open the Text Format dialog box.

4. Select the text you want to modify, and adjust the scale in the "Width Factor" column on the right.

5. Click Confirm in the upper right corner to complete the modification.

6. The effect of the modification.

Choose the font that starts with stan.,As for the Song body and black font, I don't use it.。 It's a big deal that you delete the original bold words and type them by hand?

<>2. Enter the "fontalt" command in the CAD command bar and press the enter key to confirm. Sleepy.

3. Then, enter "@! hztxt universal font", press the enter key to confirm.

4. Finally, enter "re" in the command bar and press the enter key to confirm the spring balance.

5. In this way, the problem that the font cannot be displayed is solved.

<>2. Enter the "fontalt" command in the CAD command bar and press the enter key to confirm. Sleepy.

3. Then, enter "@! hztxt universal font", press the enter key to confirm.

4. Finally, enter "re" in the command bar and press the enter key to confirm the spring balance.

5. In this way, the problem that the font cannot be displayed is solved.

Material Tools: CAD

1. Enter the text modification command "ed, ddedit to activate the text dialog box. Or double-click the left mouse button to activate the dialog box.

2. Select the object you want to annotate, and the text modification dialog box will be opened.

3. Open the Text Format dialog box.

4. Select the text you want to modify, and adjust the scale in the "Width Factor" column on the right.

5. Click Confirm in the upper right corner to complete the modification.

6. The effect of the modification.

1.Enter the command "ed" to select the text you want to bold.

2.Click on the text format pair with the band in the box"b"The icon of the word can be bolded by the text, and press the confirm button to complete it after processing.

Double-click on the text you want to change and the box appears There is a b Click to bold The main thing is the font selection I don't use this bold.