Is it comfortable to use solid wood floor heating for home decoration?

In order to make it no longer cold in winter, many families choose floor heating, after having floor heating, it is indeed very comfortable, so the question is, can the floor heating be laid with wooden floors? What kind of floor is good? The relevant knowledge before installing floor heating must be clearly understood.

There are many kinds of materials suitable for geothermal heating on the market, and the materials commonly used for laying under floor heating are parquet, ceramic tiles, marble, etc., but which one is better? Parquet flooring has a better fit and comfort on the foot, and feels warmer on the wooden floor with bare feet. The heat retention is much better than that of tiles, and when the temperature is reached and the underfloor heating is turned off, the wooden floor can keep the house warm for a longer time.

The reason why you choose laminate flooring over solid wood flooring is that although solid wood flooring is more environmentally friendly, it is not suitable for use as underfloor heating flooring. Because after a long period of use, the solid wood floor will have deformation, glue, cracks and other phenomena, if the floor heating is laid, the probability of thermal deformation will be greater, and it is even possible to warp the whole piece. The performance of laminate flooring is more stable than that of solid wood flooring, and the probability of this phenomenon is relatively low.

Ten precautions for floor heating installation 1. Be sure to find a construction team with professional knowledge of floor heating. "Three points of flooring, seven points of installation", the effect of the amateur decoration team is self-evident. 2. The tightness of the floor heating system must be checked before paving.

3. The ground must be dry (which can be judged by experimental phenomena), and the moisture content of the cement floor should be lower than that; The indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity is about 60 degrees before and after installation. 4. It is strictly forbidden to nail the ground during construction. After the construction is completed, nailing is also prohibited on the ground to prevent damage to the heating coil.

5. Before laying the laminate floor, the EPE composite film should be laid (the EPE composite film must be marked with the words floor heating radiation) to isolate the moisture and release the moisture from the surrounding baseboards. 6. The keel should not be laid. The low thermal conductivity of the air will affect the heat dissipation effect and may damage the pipe.

7. When laying the floor, it is necessary to use the floor heating glue to increase the use time and effect, and this glue basically does not have to worry about the problem of harmful gas emission 8. Leave enough expansion joints between the floor and the wall, and use a baseboard that is thicker than the current general floor. 9. The paving of the ground and the installation of the baseboard should be divided into two constructions. 48 hours after laying the floor, wait for the glue to dry completely, remove the fastener and then make the baseboard.

10. The floor can be heated 24 hours after installation.

The solid wood floor heating floor has good thermal insulation performance, can play the role of warm in winter and cool in summer, comfortable feet, safe to use, has the role of regulating air humidity, gives people a more comfortable environment, and brings people a natural and friendly feeling. Jiusheng solid wood floor heating floor, selected from the world's precious wood, pure solid wood, does not contain any glue, does not release formaldehyde at high temperatures, and the constant temperature effect is better, and can adjust the indoor air, comfortable feet, especially beneficial to the growth of children;

Now the winter is too cold, and in the unheated south, it is simply sinful. This year, my house is also going to install floor heating, and recently I saw that the natural floor heating floor is doing activities, which seems to be available in all stores across the country, so I will buy it again at that time, and it is cost-effective.

It is possible to lay solid wood flooring, but the selection of wood boards must pay attention to the quality of the board and whether there is a special floor heating. However, it is recommended that the room with underfloor heating should not be used with solid wood flooring, and it should be decided according to the particularity of the geothermal heating method, and it is best to choose a special geothermal floor.

Extension: Solid wood flooring is a floor decoration material formed by drying and processing natural wood. Also known as log flooring, it is a floor that is directly processed from solid wood.

It has the texture of natural growth of wood, is a poor conductor of heat, can play the role of warm in winter and cool in summer, comfortable feet, safe to use, is an ideal material for floor decoration such as bedrooms, living rooms, and study rooms.

The wood species used for solid wood flooring require beautiful texture, moderate hardness and softness of the material, good dimensional stability and processability. Commonly used solid wood flooring tree species in the national standard "GB stipulates: birch, southwest birch, Pingguo iron sumac, ash, large gamba, Malayan gamba, water green grass, small leaf green, white oak, red oak, bitter oak, oak, beech, teak, neem, wood podum, fragrant two-winged bean, balsam pigeon pea, etc.

The paint coating of the solid wood floor basically maintains the natural color charm of the wood, and the color system is relatively simple, which can be roughly divided into red, brown (coffee) and yellow. Each color range is divided into several different shades, which can be matched with almost all common furniture and popular furniture decorative panels.

Wooden floors can be laid on floor heating, but there are special requirements for wood floors used for floor heating.

First of all, the wood floor selected is not easy to deform and warp, and it should also be conducive to the heat conduction of floor heating, and can not affect the effect of using floor heating;

Generally speaking, laminate flooring is more suitable than parquet flooring on floors with underfloor heating.

Floor boy daily life record.

Solid wood flooring is an option for geothermal heating, but it is not the best option. Parquet is recommended for geothermal heating.

The choice of geothermal floor should be decided according to the particularity of the geothermal heating method: to adapt to the repeated change of cold and heat and to facilitate heat conduction. First, the geothermal floor should first have a small amount of deformation; Second, it should be conducive to heat conduction; Third, moisture-resistant and waterproof.

Under the same environmental conditions, the deformation of solid wood flooring is greater than that of laminate flooring, and the deformation of laminate flooring is greater than that of multi-layer parquet. The reason for the small deformation of multi-layer parquet used for geothermal heating is that its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back, which dissolve the stresses generated by the heating surface, so that it has minimal deformation. The deformation of the wooden floor from large to small is as follows:

Hardwood flooring》Laminate flooring》Parquet.

The thermal conductivity of the floor is related to the thickness of the floor, and the thickness of multi-layer parquet is about the same as that of laminate flooring, however, the anti-deformation groove on its back is conducive to air circulation, reduces noise, and the thermal conductivity is better than that of laminate flooring. The thermal conductivity of wood flooring materials is arranged in order from large to small: parquet "laminate flooring" solid wood flooring.

In winter, when the interior is dry, it will generally become humidified, and the moisture and water resistance of the floor is equally important. The parquet is specially treated, and the sample is soaked in water for 3-5 days without obvious deformation; Even if a large amount of water runs on the ground after installation, and the arch is soaked, as long as the doors and windows are opened and the air circulation is maintained, it will soon be restored to its original state, which solves the customer's worries that the customer cannot recover after laying other floors when encountering water. In terms of moisture resistance and water resistance, parquet is significantly superior to other categories of flooring.

The thermal resistance of solid wood flooring is large, which will affect the heat dissipation effect. The moisture content of solid wood flooring has certain requirements, and it is easy to be affected by the external environment to produce wet expansion and dry contraction, coupled with thermal expansion and cold contraction caused by heating, it is more likely to produce scooping, twisting, bending, and cracking, which will affect the service life of solid wood flooring. The keel needs to be played during installation, which is easy to damage the underground pipe, and the keel is easy to deform and cause deformation of the solid wood floor.

Therefore, geothermal heating can only be applied to parquet.

We know that wood expands and contracts with changes in temperature and humidity, and the temperature difference is even greater in the presence of geothermal heat. American Drach in the study of geothermal floors for ten years. Floor stability is top-notch:

The exclusive carbonization process, by heating the wood to about 145-160 under the condition of oxygen isolation for treatment, significantly improves the dimensional stability and biological durability of the wood while retaining the natural properties of the log foundation.

The decoration of solid wood flooring has the advantages of bai: du1Good stability:

Due to the unique structure of the multi-layer solid wood floor, which is criss-crossed and arranged, the stability of the DAO is very good. There is no need to worry about the floor being deformed by moisture, and it is also the best floor for installing underfloor heating.

2.Affordable: Multi-layer solid wood flooring does not use as much wood as old wood flooring, and can make full use of the material, so it is much cheaper than old wood flooring.

3.Easy to care: The surface of the multi-layer solid wood floor is well painted, the wear resistance is very high, and it does not take too much effort to maintain.

4.Cost-effective: Since the materials used in multi-layer laminate flooring are all logs, there is almost no difference between the foot feel and the solid wood flooring.

And the surface of the multi-layer parquet is made of precious wood, which looks the same as the solid wood floor, and is much cheaper than the solid wood floor, so it is very cost-effective.

5.Simple installation: parquet is the same as laminate flooring, and there is no need to hit the keel during installation, as long as it is leveled.