The machine DJI mini can t start, what is the reason and how to fix it

It may be caused by insufficient power supply, and it is enough to replace it with a more powerful power supply.

The specific insights are as follows:

First of all, check all the cables that need to be used, including the power plugs, to see if there is a problem to ensure that all devices are connected correctly and tightly together, and that the power supply is in the best condition.

Next, check if the power is turned on. Listen to the sound of the power supply fan to see if the hard drive is working properly. If you don't hear anything, the power supply may be running low and you may need to replace the power supply unit.

To determine this, consider using a power supply test device, such as PC Power and Cooling, to test the power output.

If the power supply** is normal, but the screen is still pitch black, try connecting a different monitor to your computer to make sure it's not the display's problem. If the monitor is working normally, change a ** connection cable to see, if the hard disk can run normally at this time, the monitor still has no image, it is very likely that the graphics card is faulty. You want to replace it with a new motherboard, or use the motherboard's integrated graphics card.

If the motherboard has this feature. When the case is opened, check that all the fans are working properly after the power is turned on, and the computer may also be experiencing overheating.

If your monitor is working fine, but the hard drive doesn't boot up and the display doesn't have any images, consider setting up the CMOS again. Turn off the computer, unplug the power supply, and remove the battery from the motherboard by wearing anti-static protective gloves, etc. Then wait for about five minutes and reset the CMOS settings.

Finally, restart the computer after the setup is successful and see if the problem is solved.

If the device cannot be turned on, please check it in the following ways:

1.Please make sure that the battery is sufficient, and the correct way to turn on the device is to press the power button once, release it and then press and hold it for two seconds;

2.If the new device is used for the first time or has not been used for a long time, the battery needs to be connected to the charger to charge before use to wake up the battery;

3.If the above are normal, it may be a battery contact problem, it is recommended to manually adjust or wipe with alcohol, if it is not improved, it is recommended to send it back for maintenance.

Hello, this question is a bit difficult.

Summary. DJI mini2 won't turn on.

If the device fails to turn on, please troubleshoot as follows:

Please make sure that the battery is sufficient, and the correct way to turn on the device is to short press the power button once, release it and then press and hold it for two seconds;

If the new device is used for the first time or has not been used for a long time, the battery needs to be connected to the charger to charge before use to wake up the battery;

If the above are normal, it may be a problem with the battery contacts, it is recommended to adjust it manually or wipe it with alcohol, if it is not improved, it is recommended to send it back for maintenance.

DJI mini2 won't turn on.

DJI mini2 can't turn on the device and can't turn on, please check as follows:1Please make sure that the battery is sufficient, and the correct way to turn on the device is to short press the power button once, release it, and then press and hold Minkong for two seconds; 2.

If the new device is used for the first time or has not been used for a long time, the battery needs to be connected to the charger to charge before use to wake up the battery; 3.If the above are normal, it may be a problem with the battery contacts, it is recommended to manually adjust or use alcohol to wipe the substance, if it is not improved, it is recommended to send it back for maintenance.

No way. If the above are normal, it may be a problem with the battery contacts, it is recommended to adjust it manually or wipe it with alcohol, if it is not improved, it is recommended to send it back for maintenance.

I wiped the alcohol and smoked after turning it on.

Are you there. What to do when it's all dark.

If it is not improved, it is recommended to send it back for maintenance.

Summary. Hello dear, the DJI mini drone you asked did not respond when you long pressed the start button? Here's the answer for you:

If the remote control is powered, please press and hold the power button of the remote control immediately after short press and release, until you hear the power on prompt. If your problem still cannot be solved, it is recommended that you send it back for self-service repair.

DJI mini drone long press the start button and there is no response?

Thank you for your consultation, I hope this service can help you enough, you can click on my avatar to follow me, and then ask me if you have any questions, and finally wish you a happy life!

1.Please press the power button to check whether the indicator light of the remote control is on, if not, please charge the remote control first; 2.If the remote control is powered, please press and hold the power button of the remote control immediately after short press and release, until you hear the power on prompt.

If you still can't solve your problem, it is recommended that you send it back for inspection through self-service repair.