What is the difference between a single yellow line and a double yellow line on a traffic route?

If your car is driving normally on the road, there is no difference between single and double yellow lines.

A single yellow line indicates that it can be turned, while a double yellow line cannot be turned.

The single yellow line on the traffic regulations means that it is forbidden to cross through, and the distinction between two lanes and two lanes.

Double Yellow Line – Drawn in a road section to separate the flow of traffic in the opposite direction. In the same use case, in terms of warning strength, the double yellow line is stronger than the single yellow line.

Both the single yellow line and the double yellow line are signs that prohibit crossing the crimping line.

If the lane is a dual lane, then there is a single yellow line in the middle, and if the lane is more than four lanes, then it is generally a double yellow line in the middle of the road.

The double yellow line is not allowed to make a U-turn, and it would be illegal to make a U-turn.

If you drive normally and don't overtake at will, it violates the traffic law, and it doesn't matter.

In the middle of the two-lane is a single yellow line, and in the middle of the four-lane and above, there is a double yellow line.

In fact, there is no difference between normal driving and ours.

With the improvement of people's living standards, cars have naturally entered ordinary families, and cars have become an important means of travel for many people. A car is a very important thing in life, but friends only know that after buying a car, they use a lot of annoying things, the first is the cost of car maintenance, the second is the high price of oil, and the ubiquitous electronic eye is on the road, and you will be fined if you are not careful. In their opinion, most of the points are deducted by fines.

After all, for a lot of people, it is difficult to avoid being fined when driving only on the highway.

When studying in driving school, we all know that all kinds of indication lines on the highway are to standardize the driving route of the car, but many people are not very clear about some of the indication lines on the highway, in fact, the lines on the highway are more complicated, and it is normal for many car owners to remember wrong. Pay attention to this when yellow lines appear on highways. Generally in the middle of the highway, there is a double yellow solid line on the highway.

The function is to distinguish the two directions, so that the vehicle can neither press the line, nor turn and cross the line. Among them, the single yellow line is divided into the difference between the solid line and the dotted line. In the middle of the highway, the single yellow line is a two-lane road, and the double yellow line cannot be pressed according to the line, which is the most basic common sense.

If there is a single yellow dotted line in the middle of the road, then this section of the road is generally a one-way street, so the owner should not go wrong, and entering the one-way line will deduct points and fines. Single yellow line and double yellow line have different uses, the role of the yellow solid line is to distinguish lanes in different directions, and in the case of solid line overtaking, the vehicle can not press the solid line, can not turn, otherwise it is necessary to deduct a fine. At the same time, the double yellow line is divided into two solid lines, solid line and dotted line.

When driving, there is only one yellow line on the road, and the dotted line can be threaded.

When we drive, the double yellow line is a dotted line and a solid line, and the vehicles on one side of the dashed line can press the line, change lanes, turn, overtake, and can switch to the front in the other direction. Vehicles on the solid line side still cannot press the line and must drive within the yellow line, which I hope you will remember. In fact, as long as you keep this in mind, whether it is a white line or a yellow line, as long as it is a solid line, you can't cross the line according to the line, if it is a dotted line, you can turn and change lanes under the premise of ensuring safety.

The main difference between the two is that the single yellow line is generally used on roads with less than 4 lanes in both directions (including bicycle lanes), while the double yellow line is generally used on wider roads. According to the relevant provisions of the "Road Traffic Sign Marking": it is forbidden to cross the dividing line of the opposite roadway (also known as the prohibition of crossing the center line of the road) There are three types: double yellow solid line, yellow dotted solid line and single yellow solid line, which are used to separate the traffic flow in the opposite direction, and prohibit vehicles in both directions or one direction from crossing the line or pressing the line.

When the train generally exists on a relatively narrow road, the two-lane road will use a single ring line to distinguish the direction of travel on both sides, mainly divided into a single yellow solid line and a single yellow dotted line, if it is a solid line is generally forbidden to cross, if it is a dotted line can be crossed, the life line mainly exists in some wider roads, such as the city's main road or some roads with more than 4 lanes of double yellow line, the main role is to distinguish the direction of the vehicle, the double yellow line is divided into two kinds of double yellow solid line and a solid line and a dotted line.

The single yellow line generally appears on the relatively narrow road, the purpose is to divide the road into two lanes, the double solid line generally appears in the road used to divide the upward and downward directions with two or more motor lanes, but there is no road with a middle divider, the two-lane road will use the single reed direction to divide, and the main road of the city and the road with more than four lanes will use the double yellow line to divide, which is the difference between the two.

The yellow line is used as the central lane divider, which is used to distinguish between up and down, and can temporarily overtake the borrowed road during driving; The double girder rental grinding yellow line should be regarded as a wall and it is absolutely forbidden to surpass it. Double yellow lines are drawn for two-way four-lane or more, and single yellow lines are drawn for the following and double yellow lines can be temporarily turned around, but single yellow lines are not!

Yellow double solid line in the center: It means that it is strictly forbidden for vehicles to cross the line to overtake or press the line, and it is used to divide the road with two or more motor lanes in the upward and downward directions, and there is no ** divider.

Center single solid line: means that vehicles are not allowed to cross overtaking or cross the line, and is used to divide the road with only one lane or one motorized lane and one non-motorized lane in one direction.

<>What is the difference between "Single Yellow Line" and "Double Yellow Line"? A lot of people get it wrong.

Generally speaking, a single yellow line will appear in two different places on the road, and the specific meaning of the message is completely different. One is a single yellow line set on the edge of the road, if it is a solid line, then it means that the road section can not fully pull over, even if it stops for a second with Hui Zhong is also illegal, and if it is a dotted line, it means that the vehicle can stop for a short time on this road.

In addition, it is a single yellow line that appears in the middle of the road, in this case the single yellow line is used to distinguish the opposite lane, and it should be noted that if the single yellow line is a solid line, then the vehicles on both sides of it can not cross the line to make a U-turn, overtake and other operations, and the line is not allowed, and if it is a dotted line, then the vehicles on both sides are not subject to the above restrictions, but it is also necessary to pay attention not to interfere with the vehicles driving in the forward direction.

Compared with the single yellow line, the first difference is that it is only set in the middle of the road, and its basic function is to distinguish the opposite lane, but it usually only appears on the traffic artery composed of multiple lanes.

In addition to the two yellow solid lines and two yellow dotted lines, there is also a yellow dotted solid line composed of a dashed line and a solid line.

For the yellow dotted solid line, the vehicle on the side of the dotted line can cross the line to make a U-turn and overtake in the lane, while the vehicle driving on the solid line side cannot carry out the corresponding driving operation, and the line pressing will also be judged to be a violation.

<> What is the difference between a double yellow line and a single yellow line? Many newcomers don't understand it, and it's easy to get confused.

For traffic markings, there are a lot of subjects in subject 1 when taking the driver's license, but it's really hard to say how much you can remember after driving on the road. Regarding traffic markings, some netizens asked, what is the difference between double yellow lines and single yellow lines?

Many people, especially beginners, may not know much about it, so it is easy to get confused. So, here's a closer look.

We know that solid lines cannot be crossed, but dotted lines can, which means that vehicles cannot cross either single solid lines or double solid lines. So where do single solid lines and double solid lines often appear? Single lines are generally found on more side roads, that is, on roads with less width.

The double lane is more common on the main road, although the road section is different, but the requirements for compliance are the same, that is, under no circumstances can you cross the line.

Dashed lines can be crossed, and in sections where solid lines are used, there will also be occasional areas where dashed lines appear. Such as intersections and U-turn positions, where vehicles are allowed to cross the line or make a U-turn.

In addition to the solid line and the dashed line, there is also a combination of the solid line and the dashed line, that is, in the two lines, one is a solid line and the other is a dashed line. The requirements for the use of the dotted line are also very simple, that is, the side of the dashed line is allowed to change lanes to the side of the solid line, and vice versa. The section where the dotted and solid lines appear is also more common at intersections, and there are more on highways.

Finally, repeat the use of the virtual and real yellow line, which has been introduced earlier, and the virtual and real yellow line generally appears more on the main road. On highways traveling in the same direction, congestion often occurs at intersections with a large amount of traffic, and the reason for the congestion is that the leftmost vehicle will change two lanes directly to the right, causing the vehicle behind to slow down. In order to alleviate congestion, the traffic police department marked the leftmost lane line as a solid yellow line, and the leftmost vehicles could not change lanes to the right.

The middle lane is marked as a dotted solid line, allowing straight traffic and lane changes on the right. In this case, novices must know that if you want to exit from the intersection in front of you on the far left, you must enter the middle lane or the right lane in advance.

The yellow line is generally used on a two-way single lane, and the double yellow line is generally used on a two-way multi-lane, and the road with a double yellow line will be wider and clearer. Single, double yellow solid line can not press, cross the line or U-turn, it becomes a dotted line after the U-turn, if the double yellow line is only one side of the dotted line, then only the dotted line on the side of the car can turn around. The main difference between them is that the single yellow line is generally used on a single lane in both directions, while the double yellow line is generally used in a two-way multi-lane road, and the road that uses the double yellow line is generally wider.

We must pay attention when driving, if we encounter a single or double yellow solid line, do not let the vehicle press the line, cross the line or make a U-turn in this place, only if the solid line becomes a dotted line, you can turn around. However, sometimes there will be a situation where only one line in the double yellow line is a dotted line, in this case, only the vehicle on the side of the double yellow line can turn around, and the side of the solid line is not. Legal basis:

Article 90 of the Road Traffic Safety Law of the People's Republic of China Where a driver of a motor vehicle violates road traffic safety laws and regulations on road traffic rules, he shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. Where there are other rules in this Law, punishment is to be given in accordance with those rules.

The yellow line is generally used on a single lane in both directions, and the double yellow line is generally used on a multi-lane road in both directions, and the road will be wider if the double yellow line is used. Single, double yellow solid line can not press, cross the line or U-turn, it becomes a dotted line difference can only turn around after returning, if only one side of the double yellow line is a dotted line, then only the dotted line on the side of the car can turn around. The main difference between them is that the single yellow line is generally used on a single lane in both directions, while the double yellow line is generally used on a two-way multi-lane road, and the road using the double yellow line is generally wider.

We must pay attention when driving, if you encounter a single or double yellow solid line, do not let the vehicle press the line, cross the line or turn around in this place, only the solid line becomes a dotted line can be turned around. However, sometimes there will be a situation where only one line in the double yellow line is a dotted line, and in this case, only the vehicle that is suspected of shooting the side of the double yellow line can turn around, and the side of the solid line is not allowed. Legal basis:

Article 90 of the Road Traffic Safety Law of the People's Republic of China A motor vehicle driver who violates the provisions of road traffic safety laws and regulations on road traffic shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. Where this Law provides otherwise, punishment is to be given in accordance with the provisions.

With the gradual improvement of people's living standards, more and more families will buy cars, but if you want to get on the road, everyone needs to get a driver's license, and you will find that when you take a driver's license test, the various lines on the road have different meanings, and it is very easy to confuse. There is also a difference between the double yellow line and the single yellow line, they are not only different in nature, but also reflect the characteristics of the different, and at the same time they refer to the direction of driving are also different, only if we understand clearly, in accordance with the regulations to drive will not violate the traffic rules. <>

If there is no sign indicating the direction on a road, but you want to indicate that it is a two-way two-lane road, the road will be divided by a yellow one-lane line, and if you use a yellow two-lane line to divide, it will indicate that it is a two-way four-lane road. If you want to turn, overtake and other behaviors, you must avoid touching this yellow line, the single yellow solid line represents the meaning of strictly prohibiting crossing, once the regulations are violated, you will be punished accordingly, and the double yellow solid line generally represents the upward and downward direction of the motor road each has two or more than two, but also can not be driven by the line. <>

And the double yellow dotted line generally appears on the road where the traffic flow is not large, the frequency of appearing at the intersection will be relatively high, if you see this kind of indication line, you can press the line into the intersection under the condition of confirming that the safety is correct, when encountering a single yellow dotted line, it is also in the case of no problem with safety, you can cross the line to overtake. If the road can be driven in both directions, a single yellow line will be used to divide it, and when the road is very wide, the double yellow solid line is the best choice, the use of double yellow lines on a narrow road will not only occupy the area of the road, but also make the car spacing smaller, which is not conducive to the safety of the driver, it is equivalent to a separation zone to divide the road into two directions, but it does not take up space as much as the separation belt. <>

In addition to the double yellow line and the single yellow line, there are many lines that indicate different meanings, these instructions are for people to drive safely and avoid accidents, so we must pay attention to safety when driving, otherwise the driving is not standardized, and the relatives are in tears.