The rearview mirror is equivalent to the driver s third eye , how to maintain the car rearview mirr

The rearview mirror is equivalent to the driver's "third eye", in addition to the usual driving attention**, rainy days should be more concerned. Because the rearview mirror will be very blurry after being exposed to the rain, the driver can only see a general outline of the situation behind him, and cannot clearly judge the rear situation, which brings great difficulties to merging and overtaking, and also causes certain safety hazards. How to make the rearview mirror clearer in the rain.

Applying detergent, soap, shampoo and wax to your car's mirrors is a simple way to temporarily fix the problem of foggy mirrors. Wang Chao of Xi'an Jinhua BMW Automobile Store told China Second-hand Car City that when driving in rainy days, he applied a layer of detergent to the rearview mirror, and the effect was not bad, especially in heavy rain, which can keep the mirror clear within 1-2 hours.

Other friends have also tried to apply soapy water, shampoo, etc., as well as wax the rearview mirror, etc., which can be kept for a longer time.

Adding a simple rain shield to the mirrors is also a more affordable option. Usually, this kind of rain shield is usually installed on the glass of the car door, and it works well. The installation process is very simple, and it can be done in ten minutes.

However, the additional rain shield is more effective when the rain is not very heavy. Once it rains heavily, the role of the rain shield is not very obvious. At present, taxis are more equipped with rain shields.

In addition to using a simple, homemade method to make the rearview mirror clearer, it is more thorough to modify the original ordinary rearview mirror into a heated rearview mirror. When driving in rainy weather, as long as the heater is turned on, the rearview mirror will be automatically heated, especially in the case of light rain, the rain will be dried immediately when it falls on the rearview mirror; In heavy rain, it doesn't dry the rain right away, but it doesn't let too much rain stay on the mirror. Relatively speaking, the rear sight of the car is good, especially in winter, which can avoid the rearview mirror in a foggy state.

It costs a certain amount of money to install heated rearview mirrors, and the cost varies depending on the model, ranging from a few hundred yuan to several thousand yuan. And the requirements for installation are also very strict, the rearview mirror must be the same model as the model, the same label, if the manufacturer does not have this matching rearview mirror, it can not be installed. In addition, the installation of heated rearview mirrors is easy to cause inaccurate positioning of rearview mirrors, and the installation line is also more complicated, so it is recommended that the owner do not install them at will.

The rearview mirror is equivalent to the driver's third eye, and it is necessary to maintain the car rearview mirror to keep the rearview mirror clean.

Coated with detergent, install a simple rain shield, do not break or stain.

The exterior mirrors should be scrubbed in time; There will be blind spots in the rearview mirror in the car, and a small round mirror can be installed to reduce the existence of blind spots; Turn on the heating function of the rearview mirror on rainy days; Develop the habit of folding the rearview mirror when parking; Do not flip the lenses of the rearview mirror.

Coated detergent, installed a simple rain shield, modified heated mirrors.

Apply detergent, soapy water, shampoo and a coat of wax to the mirrors

Pay attention to the cleanliness of the car mirror, so that they are not damaged or stained.

Apply detergent to car mirrors.

Wipe it with glass water to protect the rearview mirror at all times.

It is not difficult for auto department stores on the market to buy wide-angle lenses to change their outfits, which may further eliminate some dead ends

Rub more, a little more on the rearview mirror, but there are still a lot of dead ends.

You can use glass water, my husband used to wipe it with glass water every day.

Wipe with glass water once a day, and maintain it in a timely manner.

In the process of driving a vehicle, the car rearview mirror is a very important vehicle safety component, and it is used very frequently. If you want to talk about the accurate use of the car rearview mirror, friends may not fully understand, this time I will talk to you about how to use the car rearview mirror to ensure safety.

In vehicles, exterior mirrors and interior mirrors on both sides are generally equipped, and they play different roles. The exterior mirrors reflect the rear side of the car, and the interior mirrors reflect the rear of the car and the interior. Depending on the use, the mirror structure will be different.

There are two main types of mirrors in general, one is a plane mirror, as the name suggests, the mirror is flat, and the term is "the radius of surface curvature r is infinite", which is the same as the general family mirror, and the image can be obtained with the same size as the eye, and this plane mirror is often used as an inner rearview mirror. The other is a convex mirror, the virtual surface of the mirror is spherical, with a radius of curvature of different sizes, its image is smaller than that of the eye, but the field of view is large, like the role of the camera's "wide-angle lens", this convex mirror is often used as an exterior mirror.

In addition, friends also found that there will be a black dotted line on the outer hind limb hand sight mirror, and the rearview mirror with a black line is a double curvature lens. Double curvature lenses mean that one lens has 2 curvatures. Among them, the lens close to the cab 2 3 is a relatively smooth curved surface.

And the outer side of the 1 3 lens is the use of convex mirror, in close to the cab 2 3 lens is actually no different from the ordinary lens, double curvature lens and ordinary car rearview mirror The biggest difference is on the outside of the 1 3 lens, it can make the driver's field of vision wider, easier to find the rear vehicle that is coming.

In use, we should start from the actual situation, and not rely too much on the vision provided by the rearview mirror. Through actual use, we can find that the help provided to us by the rearview mirror is still relatively limited. For example, the exterior mirrors can only provide a view of the width of one lane on both sides, and the interior mirrors cannot see the view of the rear and lower levels, which are blind spots when driving a vehicle.

Therefore, in actual driving, you must observe more with your eyes and ensure that it is safe to operate again.

I hope you can develop good driving habits to ensure safer driving.

After the car entered the pit stop, the owner crashed into the rearview mirror of that car and replaced it with a new one at the repair shop, but pressed the switch and there was no response at all. After confirming the symptoms, it was found that the up-and-down adjustment function of the right rearview mirror lens, including rotation, was ineffective, and the possibility of power supply could be ruled out. The folding function of the left rearview mirror is normal, indicating that although there is a folding signal, the plug is rusty due to water ingress.

There is no way to deal with it anymore, so you can only use flying wires to deal with it first. After the airship was processed, the up, down, left, and right lens adjustment function of the mirror plug was energized, but the new mirror insertion in the repair shop still had no effect.

So we can find the same model, remove the rearview mirror and install it, and adjust the rearview mirror. All functions are back to normal. Car owners are advised to reorder mirror assemblies and replace factory parts.

When the new rearview mirror arrived at the store, it was sprayed with paint, and the adjustment function of the up, down, left and right lenses returned to normal, but there was a problem with the folding function. When the right side is folded, the left side is folded, at this time we all think that when the airship is folded, the wiring harness is folded in reverse, after carefully comparing the color and stitch chart of the new and old rearview mirrors, the plug pins of the rearview mirror are reversed into the folding line. Solve the problem after dealing with the harness pins.

The second repair shop had a completely unusable sub-factory part, and finally a latch insert was found on a generic factory part, and the quality of the parts is very important in normal repairs, even the best quality factory parts, and the replacement of Kopache rearview mirrors had similar pin problems. The repairman should be careful and conscientious, because he only uses his own mind and the tools in his hands to verify the material of the problem. Air resistance will also occur in the refueling system of electric jet trucks, in addition to design reasons, the fuel tank and oil pipe are close to high temperature areas, which is prone to air resistance, so it should be removed with cold water, cold wine traditional cooling methods.

Accept the discharge oil from the car filter nozzle that has been disassembled into an oil basin, discharge the gasoline with foam, and tighten the oil pipe.

Beverly cars are prone to water tank failure due to emergency driving in heavy rain. The reason is that the suction inlet is in front of and below the tank mask, and the splashed muddy water can easily protrude from the suction inlet and suck the cylinder through the air filter, creating a water immersion tank, damaging the cylinder. When a sandstorm occurs in the north, this structural feature of the Beverly Sedan makes the sandstorm breathe into the air filter, which is easy to block, and it is also effective to remove the dust of the air filter filter and turn the suction inlet to the side in sandstorm weather.

On rainy days, control your speed, choose the road, and don't sit in puddles. If the rainstorm lasts for a long time, simply removing the suction tube from one end of the air filter can effectively avoid flooding and in-tank accidents.

It may be that there is some failure in the power supply, or the plug is rusty due to water ingress, or it may be that the line is not in good contact, or there is a problem with the folding function. Therefore, when these problems occur, you can first conduct some simple troubleshooting through this aspect, and if there are no problems, you can go to the repair shop for inspection.

If the rearview mirror is not good, it is more timely to adjust, because the rearview mirror is very important, if the rearview mirror is not working well, it is very easy to have an accident.

I understand that there are two problems with poor working mirrors, the first may be poor contact, and the second may be that water has entered in the rain, so it can't work.