The computer can t install the system, saying that the hard disk is not recruited, how to deal with

When installing the system, the prompt does not find the hard disk has the following reasons, you pay attention to the comparison:

1. Before installing the system, see if there is an English prompt when the system boots up the self-test and does not find the hard disk, if you start to prompt, you need to check the connection of the hard disk (including whether the jumper is the main state) and whether the working voltage of the hard disk +5V and +12V is normal, if it is normal, it is necessary to rule out that the hard disk itself has failed, and generally cannot find the hard disk is the fault of the hard disk circuit board, which will lead to the system not being able to directly check its existence. If it is a new hard drive, then you should partition it and set the main partition and format it before you can use it.

2. If your hard disk has been working normally, then you can restore the BIOS to the default settings, if you can't operate, remove the motherboard battery for 10 minutes and then install it, and see if the system still prompts that the hard disk is not found. Because the IDE SATA port detection in the BIOS will not be able to find the hard disk if it is set to off.

3. If you install the system when the installation boot file of the disk can start to copy, but when you enter the normal file copying, it immediately prompts a hard disk failure or something that causes the file to be unable to continue to copy, then you can remove the excess memory stick, and only keep a strip (closest to the CPU) to install the system, and then insert the rest of the strips back into the boot after installation.

It's the brand Jian XP, right? The manufacturer and Microsoft jointly promote Win7,Modify the settings in the BIOS to restrict the installation of XP,It's just a matter of startup method,You go to the Internet to find out how the relevant system is security XP.。

1.Is the hard disk connected Check the power cord Data cable Jumper 2See if the BIOS settings are restricted.

3.Formatted your hard drive? Partitioned?

It depends on your actual situation, and I wish you a lot of learning.

That is, the system did not find the hard drive.

You can go into the BIOS to see if you can see the hard drive, if not, then you can be sure that the system has not discovered the hard drive.

If you don't understand anything, not even the BIOS in English, then ask a computer company for help.

The questions are not careful enough, the possibilities are too many, and the list goes on. Never mind.

1. If it is a disc load, see if the disc is defaced.

2. If the installation file is copied to the hard disk.

See if the documents are complete.

3. Check whether the hard disk is SATA and then see if the installation disc supports SATA format hard disk 4. Check whether the hard disk has bad sectors.

There is such a possibility, you had better use the hard disk partitioning tool to check if the hard disk is detected What is the capacity If there is a system but it cannot be installed The system can confirm that the hard disk track is faulty. Another way is to check whether the system image package or installation package you are installing is an actual data package, and whether there are false or missing files, and such an installation package cannot be installed on the system normally!

Packed on a disc or a USB stick. What does it mean to not be able to install the system at what point can it be installed.

How can it not be installed, if it is installed halfway or completely uninstalled, it is very likely that it is not installed, and there is a problem with the ghost system, some ghost systems may not support SATA hard disks well, and there is that you turn on the achi function of the motherboard, resulting in you not being able to find the hard disk.

There are many reasons why the system may not be installed. Check if there is a hard disk when the BIOS boots up, and slowly eliminate it!!

Can you find the hard drive when you install it, if you find the hard drive, there should be no problem, you can install it.

When installing the system, as long as you can find the hard disk, you can generally install it, if you feel that the hard disk is problematic, format the hard disk before installing the system, and then try!

There is that possibility, you can try it with a different data cable.

Or you can go into PQ to see if the partition table is wrong

Whether the first partition is set as the function partition

Not necessarily, it's hard to say, there are many problems: memory, optical drive, system disk, all are possible.

The system installation disk may be abnormal, you can recreate the system installation disk by following the following methods, and then try to reinstall the system.

A computer with a Windows system (for making a boot disk) A USB flash drive of 4G or more.

Windows 7 system package.

Floppy pass Ultraiso software.

5. Click "Install":

6. Installation completed:

7. Open the Ultraiso software you just installed (under the Windows 7 system, you need to right-click the Ultraiso icon to choose to run as an administrator), and click "Continue Trial" to complete the version

8. Now start to make the U disk version of the system disk.

Open the floppy drive software and plug in your USB flash drive.

Click Boot --- write the hard drive image.

Select your USB flash drive in the hard drive.

Click Write and you're ready to go. Right.

Wait patiently: Success, you now have a USB flash drive version of the system disk.

Follow the above steps, and the USB flash drive boot disk with the Windows 10 image is completed.

The real sense of hard disk installation, must be able to enter the operating system or CD, U disk, mobile hard disk boot into the PE system, then open the explorer, find the hard disk installer stored in the local hard disk of the computer in advance, after starting to load the hard disk to install the system file automatically.

You can't even get into the system, you should be asking how to install the system. There are many ways, but in your case, it is better to buy a fool-like system disk, put it in the optical drive, boot it from the disc, and you will know how to do it after entering the optical disc interface. If you want to fiddle with a branded notebook, this method is not recommended, it is better to have someone install it for you.

There are two types of reloading systems.

1: The original system is not deleted.

Use the system disk to overwrite the original system.

The system disk will have Chinese instructions to install, just click Next).

Pros: Fast speed.

It's quick and easy. There is no need to reinstall the driver.

Disadvantages: This method is only suitable for repair-based installations, if the virus is in memory or already in the registry.

Viruses (e.g. viruses such as the Grey Pigeon) cannot be removed.

2: Delete the original system.

It is divided into formatting hard drives.

and not formatted.

Hard disk) (1) Do not format the hard disk: Delete all hard disk files (the installation disk will prompt.)

Whether or not it is fully installed, if you choose to install it completely.

You will be prompted to delete the hard drive files completely.

and hard drive repartitioning.

i.e. delete all files).

Pros: Cleans all files more thoroughly.

In general.

This is the way to install it.

It's quicker. Protects the hard drive.

It avoids the damage caused by formatting to the hard disk.

Cons: Need to be prepared in advance.

Various drivers.

including sound card, graphics card, network card), and some of the original important files are backed up, and it should be noted that if the virus is in memory or already in the registry.

Viruses (e.g. viruses such as the Grey Pigeon) cannot be removed.

2) Formatting: Use formatting software.

Format the hard drive thoroughly.

Completely delete all files and files (even with recovery software) and install the system disk.

Pros: All viruses are completely removed, no matter what virus.

are completely deleted before formatting.

The registry is completely cleared. It is the most thorough reinstallation system.

Disadvantages: In addition to being very cumbersome and needing to back up important files and drivers, the biggest disadvantage is that it brings irreversible damage to the hard disk (because formatting is to degauss a layer of magnetic powder on the surface of the hard disk, and a hard disk is basically scrapped after formatting about 4 times at most).

Therefore, it is recommended that if it is not a particularly powerful virus, don't be busy formatting, first figure out what kind of virus it is, if it really can't be solved, it's not too late to format it.

It's very simple to use a ghost disk directly.,Select the optical drive FIRST in the BIOS settings.,Then follow the prompts to operate.。 You can also use the made USB disk boot with an image to set the first boot of the USB disk to be the system.