Why did I set up a router and my laptop was also detected, why can t I surf the Internet?

Belch. Big brother,I'm the same as you.,The wireless network card (router) is tp-link,The system is also win7 home.,But I can use it.。 You open a web page, then enter, enter, enter, then enter the account password admin, and then enter, click 'Setup Wizard', click Next, click Next, and then set a password, that is, the password, to be used in the future, if there is a pop-up window, click Save, if not, continue to click Next, there is an SSID, is your wireless network name, remember it, if you can't remember it, change it yourself, and then click Next, and then click Finish.

Then you can see if you can get online. When you connect with your hand, you have to select the wireless network with your SSID name, and then connect, he will ask you to say the password, you can enter it, and then you can connect. However, it should not be too far away from the router, otherwise the signal will be poor or unconnected.

The password must be set, otherwise others will steal the network, that is, use your mobile to connect to your network, so your network speed will be slow. Then you can see the light on the front of the router with a few words written on it, and if a few are on, there are several people on the Internet, which is convenient for monitoring.

Can you use a network cable to link the laptop and router to the Internet normally?

312283055 My penguin.

If you don't understand, you can ask, hope.

You check how your router is set up to MAC address lock, and then no one can connect to your router except your own device. Even if they have the password for your router - unless they change the settings of your router, they won't be able to get up to just knowing the wifi password.

Because the power adapter is not plugged in or the router is someone else's or a bad guy (

There's no way, as long as it's connected to the router, it will be displayed.

This needs to be set up on your own computer, and the steps are as follows:

1. Turn on the power supply, then plug in the network cable, plug the incoming line into the WAN port (generally the blue port), and then plug in a LAN port with the network cable connected to the computer, after doing these things, then you will see that there is an address and account password behind the router, and enter the address you see in the router in the browser after connecting.

2. Then enter, enter the corresponding account and password.

3. After entering the operation interface, you will see a setup wizard on the left, click to enter.

4. Click Next to enter the Internet mode settings, we can see that there are three options for Internet access, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP address is generally a private line, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or you want to fix the IP.

5. Select PPPoE dial-up to access the Internet, and fill in the Internet account and password.

6. Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., SSID can be set to your favorite name, and then the mode mostly uses 11BGNWireless security options we want to choose WPA-PSK WPA2-PSK.

7. Click Done, the router will automatically restart, and the setting is successful.

If it's not the name you set, it's not your wireless signal, and some routers' wireless signal has to be turned on in the router. Let's see if you have turned on your own wireless.

Is your name set in Chinese, the Chinese phone cannot be connected, and the name cannot be displayed normally.

It's not a password error, and it's not necessarily your network that you've detected!

Not all that can be searched on your phone is your home.

This is a DNS server resolution error belonging to wireless routing, generally speaking, most routers on the market have this weakness, the simplest is to manually allocate IP, gateway and DNS server, if it is troublesome, you can use 360 network diagnosis.

Dude, use your computer to set up the router and it should be fine.

Even if you don't get tested, it doesn't matter.

One day, if you feel that the Internet speed is affected, it is no problem to test again.

You can see if there is any stealing the net.