Should I set up a route or a computer? Do I have to set up my router with a computer?

It's a problem with router settings, you first use a wire to connect to the computer and the other end is connected to one of the LAN ports of the router, don't connect the others, and then take a look at the IP of your router, and then set the IP of the computer to the same, click OK It will automatically get the network address, and then open IE and hit the IP you just set in the address bar Enter will appear the router settings interface, Then enter the name and password (there is on the router) and then set up your own Internet access method to enter the one that telecoms give you, and finally click Done, and then connect another computer (automatically get the network address on the line) and then plug the bus into the WAN port, now everything is OK If you are setting these up yourself for the first time, don't be in a hurry, take your time, I tried it several times at the beginning

This kind of routing cat is the most headache.,I've also touched it once.,Actually, it's a cat.,But there are four interfaces.,Support multi-user Internet access.,But there's no one to dial.,It's more annoying.,I won't solve it.

user:admin

password:admin

Go in and set it up,PPPoe,Write your broadband account password in,And set it to automatic connection,Because you didn't describe the problem clearly,And it's related to your Internet authentication method,So I'm not sure this method works,But you can give it a try。

You can use your phone to set it up, and the specific settings are as follows:

Tool: Meizu Blue Note5

1. Enter on your phone and click Enter on the right.

2. Set an administrator password and click OK below.

3. Since there is no connection to the computer, there is no need to set the WAN port, click Skip WAN port detection below, <>

4. Enter the password of the broadband and click Next.

5. After that, set a wireless password and click OK below.

The router setup has to be set up on the computer, and there is no other way.

The steps are as follows: First, turn on the power supply, then plug in the network cable after the socks mountain, plug in the WAN port (generally the blue port), and then connect with the computer network cable key on which LAN port to plug in, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online Internet access at home, then you have to prepare an additional modem, commonly known as "cat").

Second, then enter, enter the corresponding account and password, generally the new ones are admin.

3. After entering the operation interface, you will see a setup wizard on the left, and the attack will enter (generally it will pop up automatically).

Fourth, click Next, enter the Internet mode settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

Because I dialed in so I chose PPPoE.

Fifth, choose PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, open broadband will have an account with, fill in OK.

Sixth, then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNWe have to choose WPA-PSK WPA2-PSK for the security option of the Wuyan line, which is safe, so as not to let people hack and rub the net.

You can set it up with your mobile phone.

Note: You can only use your mobile phone to set up your wireless router if Wi-Fi is enabled by default).

2. Login settings interface: Open the browser on your phone, enter in the address bar of the browser: here is a quick demonstration, the specific address and password to check the back of your router, there is a prompt) - enter the default user name:

admin, default password: admin - > click "OK".

3. When you enter the setting interface of the router for the first time, the "Setup Wizard" will automatically pop up - click "Next".

5. Enter the broadband account number and broadband password provided by the broadband operator - > click "Next".

6. Wireless network settings: "Wireless status" selection: on - >SSID" user-defined modification, but note that Chinese cannot be used - > select "wpa-psk WPA2-PSK".

- >PSK Password" user-defined settings - > click "Next".

7. Setup completed: Click "Restart".

1. No, it can be configured with a mobile phone or tablet browser.

2. The method is as follows:

1. Swipe down to turn on Wi-Fi and tap the settings icon.

2. Click WLAN, select the corresponding SSID wireless network name, and click Connect.

3. Open the browser of the mobile phone, enter the IP address of the router), enter the router account and password (see the label or manual on the router box).

4. Click Next.

5. Select PPPoE (ADSL Virtual Dialing) in the Internet access mode, and click Next.

6. Enter the broadband account provided by the broadband operator in the Internet account and the broadband password in the Internet password.

7. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption mode, and set the wireless password of no less than 8 digits in the PSK password.

8. Click Restart, and the router is set successfully.

If it is a wireless router, you can connect to wifi through your mobile phone, and then enter the settings with a browser according to the username and password of the label on the bottom of the router.

In general, yes! To connect to the router for the first time, you need an IP address and router account password.

Setting up the router includes the configuration of the router, which requires the operation interface, and a display and operation unit is required to enter the network account and password, set up the wireless network connection and password. The computer is the best router operating unit!

You can also use your phone to set it up, as long as you can access the configuration page with a browser.

If it is a simple setup, the wireless router can be connected with a mobile phone and then operate the settings on the mobile phone.

You don't need to set up the computer, set the attributes in the network connection, mainly the router. You also have to look at the manual, different routers are different. I'm also a rookie.

With a router, you don't need to set up a computer, you need to set up a router.

The external IP address of the router is the IP address you use to surf the Internet

The intranet IP is your gateway, which is generally yes or.

PC gateway Yes or.

Several machines connected to the router use this as a gateway, and then the IP can be accessed from within a network segment.

The subnet mask of the router and all computers should be changed to be the same.

DNS does not change.