The configuration is windows7 PC,It s broadband,Ask the master to teach how to get,Bounty is not a p

If you want to let win7 do hotspot sharing network, you don't need to use connectify, win7 itself can be set. The process is as follows:

1.Run the command prompt as an administrator.

Because the steps below must be run under administrator privileges, we can find "Command Prompt" from the start menu, or type directly into cmd quick search, right-click on it, select "Run as administrator", click "Yes" in the user control window that pops up. Another way is to hold down the Ctrl and Shift keys and click directly on the shortcut, which is even easier.

2.Enable and set the "Virtual WiFi Network Card" mode.

Run the following command to enable the virtual wireless network card (equivalent to turning on the router):

netsh wlan set hostednetwork mode=allow ssid=”win7 ap

wow!” key=wifimima

There are three arguments in this command:

mode: Whether to enable the virtual Wi-Fi network card, change to disallow to disable, and the virtual network card will disappear.

SSID: Specifies the name of the wireless network, preferably in English.

key: specifies the password of the wireless network. This password is used to encrypt the wireless network with secure WPA2, which can prevent the network from being rubbed off.

The above three parameters can actually be used separately, for example, only mode=disallow can directly disable the virtual wifi network card.

3.Enable Internet Connection Sharing (ICS).

In order to share the connected internet with other computers or devices, we need to enable the "Internet Connection Sharing" feature. Open the "Network Connections" window, right-click on the network connection that is connected to the Internet, select "Properties", switch to the "Shared" tab, select the checkbox in it, and select the network connection that allows it to share the Internet here i.e. our virtual wifi network card:

After confirmation, a "Shared" icon will appear next to the NIC icon that provides sharing, indicating that "Internet Connection Sharing" has been enabled to the virtual wireless NIC

4.Turn on the Wi-Fi.

Continue running the following command in the command prompt:

netsh wlan start hostednetwork

to turn on the wireless network we set up earlier (equivalent to turning on the wireless function of the router. Similarly, change start to stop to turn off the wireless network).

As you can see, the virtual wireless network card has turned on the wireless network we specified, and its IP address and other attributes are assigned by the "Internet Connection Sharing" service, so it is more special:

When you're all set, you can connect to the wireless network on the computer or mobile phone you need to connect to the Internet, and you're ready to surf the Internet

You use win7 as a wifi hotspot, I recommend you ** a connectify Chinese version, very easy to use, very stable. Open the software when you want to use it, and close the software when you don't want to use it.

The setup is very simple, and you will understand it when you open it up and see it.

Don't reinstall the system just yet, try it like this:

Click Start, find Run, enter cmd, OK, then type: "netsh winsock reset" and press Enter, wait for the system to be repaired successfully, and restart the computer.

One. First of all, you need to make sure that your laptop's Wi-Fi connection is connected (you can check whether there is an available Wi-Fi in the available Wi-Fi network), if not, please use the function key of the laptop keyboard to turn on the Wi-Fi. Two.

If there is an external wireless switch, please make sure that the raft is turned on. Three. Are you using Win7 or Vista?

If you use Win7 or Vista system, it may be because of 360, resulting in Win7 and Vista users can not access the Internet normally. Here's what you can try:

2.Right-click on the icon and select "Run as administrator" from the pop-up menu

3.The UAC window pops up, click "Allow".

4.Type netsh into the program

winsock

reset5.

Truth be told, there are many reasons for slow booting. It must be comprehensively analyzed.

If you can, please tell some use cases, such as what system you use, when you installed the computer, how you usually use it, whether you feel abnormal when you use it, and so on. It is possible to analyze the cause.

About supplements. Okay vista system,Then I think the only suggestion is to simply redo the system,Pretend to be the current mainstream win7.It's not too difficult to get familiar with Vista Win7,Vista boot speed is a common problem。 The boot speed is much better in win7.

Open the Control Panel Network & Interent Tethering Center Manage Wireless Networks (left), then find the wireless network you want to connect to and delete it. Reconnect and you're good to go. A security key is required when reconnecting.

You should know that password ... This may be the result of changing the encryption method of your wireless router.

Have you changed your router configuration? The yellow exclamation mark usually appears when the IP address cannot be obtained. It is recommended to check the router configuration or restart the router.

If your title is a system error message, it is possible that your wireless router uses a static address, and your local IP address is set incorrectly, and the gateway or mask is more likely to be wrong.

Generally, wireless is to use "automatically obtain IP address", you see if you have equipped your wireless network card with an IP address, if there is a change to automatically obtain it.

Changed the encryption type in the Wireless Network Frequently Used Networks pop-up menu Security.

You may be using a local area network, right-click to open the network neighbor - properties - right-click local connection properties - select the lowest XP protocol in the middle of the dialog box ticked the entry--- then click on the properties --- see a dialog box--- choose to use the following IP address - manually set a fixed IP address to solve.

Hello, in this case, it is recommended that you manually set the IP address of the wireless network card, and do not use automatic acquisition.

On the other hand, it is recommended that you do not use optimization software for so-called optimization, otherwise it is very easy to cause many services of the wireless network card to fail to start and cause problems.

1. If it is a home network, you can set a fixed IP to try, if not, you can reset the wireless route;

2. If you use a public network, it is recommended to contact the network management to see if there are restrictions on the network.

Right-click on the desktop and personalize the change desktop icon to tick the icon you want to display on the desktop. Are you sure..

That's what it is, there is only one ** station, click the "Start" menu in the lower left corner, and then select "Computer" in the menu that opens, press the right button, and click on the desktop to show that there is a "computer" on the desktop. You can also right-click on the desktop, select "Personalization", and then click "Change Desktop Icon" on the left, and tick "Network", so that there is "Network" on the desktop.

On the taskbar and time together, right-click on it to open the Network and Internet Sharing Center.

Spend your life as a friend.

Open the start menu--- right-click on the computer--- it will show on the desktop, there is a small box in the taskbar.

Troublesome, but most effective, redo the system to recover a bit.

Reinstall the NIC driver, and the driver is still stable on the official website.

It's a problem with the NIC driver, just reinstall the NIC driver.

It may be a password problem.,You go online to reset the password.,Enter the new password in the small red cross right-click on the attribute.,If it doesn't work, go online and change the name of the router.,We are happy to go online.,TP doesn't know.,No, you check.。

Try pressing and holding the reset button on the back of the router. Until the router restarts.

Try changing WPA-2 to WPE, that's the problem with mine.

The key is that your router has stopped working, it is not in the dial-up, after the router restarts, you have to re-enter the account name, password, etc. to save it, and then restart it is OK.

Hello, Mr. Chen. Right-click on the desktop network icon and select 'Properties', then open 'Change Advanced Sharing Configuration' and then there will be two options with drop-down menus, it is recommended to set both of them, check the 'Turn off password protection sharing' inside to save the changes. One more word, it is recommended that you go back to school to make up for your online class!

Let's see if the network card driver is installed.