How to wash the jacket without damaging the waterproof layer?

Updated on home 2024-04-20
7 answers
  1. Anonymous users2024-02-08

    The jacket is a functional garment, it has the function of windproof, waterproof and breathable, its cleaning method is different from ordinary clothes cleaning, if the cleaning method is not correct, it will seriously damage the waterproof performance of the clothes, in this sense, correcting the wrong washing method is equivalent to you buying a new clothes. So how many ways do we have the right washing? Eagle Nuoda will introduce to you today:

    1. Local cleaning.

    First of all, when wearing, you should pay attention to try not to get oil stains and substances that are not easy to clean, reduce the number of cleanings, and prevent excessive damage to the film. If one part of the garment is stained, the stain can be partially cleaned to avoid contaminating other parts and affecting the overall appearance. It is recommended to use an all-purpose foam cleaner, shake well before use, and then spray the foam evenly on the surface of the garment about 20cm away from the stain site, wait for 30 to 50 seconds, and then gently wipe the surface of the stain with a cotton cloth.

    2. Wash the whole garment.

    In the production process, in order to ensure waterproof, breathable and windproof performance, various coatings or films are used on the fabric of the jacket, and the film will not be damaged naturally, but excessive external force and corrosive substances will damage the film, so the jacket can not be dry cleaned or machine washed, and it can only be washed by hand with water at about 40 degrees (do not use hot water).

    First soak the garment completely, and then wipe the surface of the garment with a sponge or cotton cloth directly dipped in an appropriate amount of detergent, must use neutral detergents (the shampoo and dish soap we use in our daily life are neutral), and do not use bleach and fabric softeners. Simply rub and rinse until the water runs clear.

    3. Use professional clothing cleaner for washing.

    nikwax? tech wash?Professional garment cleaners are suitable for cleaning garments with waterproof and breathable fabrics, and can be used for jackets to achieve better washing results.

    Soak the garment completely and then pour 100ml of detergent (suitable for two clothes) and soak it for about 10 minutes, then scrub it with a sponge or cotton cloth. Tech Wash is a neutral detergent, you don't have to worry about injury during washing**, rinse until the water is clear after washing.

    Fourth, water-repellent maintenance.

    If you want to keep the original waterproof and breathable jacket still maintain the original water-repellent effect, you should also use a washable waterproof clothing waterproofing agent for maintenance: put the wet clothes just now into clean water (no need to dry, just put it in), and then pour 50 ml suitable for two clothes), soak it fully for 20 minutes, and then rinse it with cold water until the water is clear.

    5. Drying. Don't twist it hard after washing, hang it in a ventilated place with a hanger and stretch it to drain, avoid sun exposure, and never use a dryer.

    Sixth, the effect after washing.

    The washed clothes are as clean as ever, and the water repellent does not leak after maintenance.

  2. Anonymous users2024-02-07

    The jacket is best washed by hand with warm water and soap powder, and the stubborn dirt is washed with dish soap and a soft brush. Do not rub vigorously and do not use hot water, too high a temperature will cause the waterproof layer to peel off. It doesn't matter if it's machine washed directly with an inner tank that can only prevent light rain.

  3. Anonymous users2024-02-06

    Eagle Nuoda, a workwear manufacturer,

  4. Anonymous users2024-02-05

    Summary. 1. Clean the jacket with detergent first, follow its usage guide, choose hand washing, and add 1 cap of washing liquid per 15 liters of water. Cleaning is fine; Then, rinse with clean water.

    2. After the jacket is cleaned, use a washing waterproofing agent, the instructions guide says to add warm water and waterproofing agent for waterproof treatment, add 1 bottle cap of washing liquid to every 15 liters of warm water, mix the solution thoroughly, soak for 30 minutes, stir once every 10 minutes, and rinse fully in warm water.

    3. After the waterproof treatment of the jacket, due to the thermal activation of the product. For the best waterproofing effect, the garment must be tumbled, or ironed, and the tumble must be set to medium temperature for 30-60 minutes, and it is finished.

    When washing the jacket, the waterproof layer begins to fall off, and the powder cannot be washed cleanly, how to quickly remove the powder of the waterproof layer?

    1. Clean the jacket with detergent first, follow its usage guide, choose hand washing, and add 1 cap of washing liquid per 15 liters of water. Cleaning is fine; Then, rinse with clean water. 2. After the jacket is cleaned, use a washing waterproofing agent, the instructions guide says to add warm water and waterproofing agent for waterproof treatment, add 1 bottle cap of washing liquid to every 15 liters of warm water, mix the solution thoroughly, soak for 30 minutes, stir once every 10 minutes, and rinse fully in warm water.

    3. After the waterproof treatment of the jacket, due to the thermal activation of the product. For the best waterproofing effect, the garment must be tumbled, or ironed, and the tumble must be set to medium temperature for 30-60 minutes, and it is finished.

    The windproof and waterproof coating of the jacket is PU coating, and this one will not stick back if it falls off. However, we can reapply it ourselves according to his principle. This kind of laminated glue things have a lifespan, generally PU glue surface will appear more than three years of this problem, belongs to the aging of the glue surface, you can repair this repair, but I personally feel that it can't be drawn, because the repair is to use a waterproof strip or hot pressing glue to make up a layer of life will not be long.

  5. Anonymous users2024-02-04

    The jacket is still waterproof after washing.

    In terms of structure, the jacket can be divided into two layers of jacket and three layers of jacket, the two-layer jacket has a two-layer structure, and the outer fabric is laminated with a waterproof membrane; The three-layer jacket has a three-layer structure, and the outer fabric, waterproof membrane, and lining are pressed into one layer. The surface of the fabric is treated with a water-repellent coating to form a water-repellent layer, so that the garment has a lotus leaf effect and will not soak into the warp and weft layers of the fabric.

    The jacket is generally pressed with PTFE, and the void of this film is smaller than that of water molecules and larger than gas molecules, so it can effectively block the entry of water molecules, and at the same time can discharge the moisture produced by the body to ensure the dryness and warmth of the body, so that it can effectively block the invasion of rain and frost and snow in humid places or stormy environments.

    water

    Water, an inorganic substance composed of hydrogen and oxygen, is non-toxic and drinkable. It is a colorless and odorless transparent liquid at room temperature and pressure, which is known as the source of human life and an important substance to maintain life, also known as hydrogen oxide. Water is one of the most common substances on Earth, with about 71% of the Earth's surface covered by water.

    It is an important resource for the survival of all life, including inorganic compounds and human beings.

    Water is also the most important component of living organisms. Pure water is a very weak electrolyte with very weak electrical conductivity. Water in daily life has more anions and cations due to the dissolution of other electrolytes, so it has more obvious conductivity.

  6. Anonymous users2024-02-03

    Whether the jacket is waterproof after washing depends on whether the cleaning method is correct.

    If you pay attention to the method when washing the jacket, it will not lose its waterproof function after washing, but if there is a problem with the method when washing, then it may no longer be waterproof after washing. The reason why the jacket is waterproof is because it will have a waterproof breathable membrane inside, if the waterproof breathable membrane is broken when washing, and the surface coating is worn off, of course, it will not be waterproof.

    The jacket can be washed with water, but it should not be washed in a washing machine, and you can wash it with water when washing by hand, but you must not rub and rub it excessively when washing, and do not wring it out after washing, in short, try to avoid damaging its coating and waterproof membrane, so that you don't have to worry about its waterproof performance. Do not rub or rub when washing, and rinse with water after washing.

    Jacket

    Jackets, also known as outdoor jackets, transliterated as jackets, is one of the essential equipment for outdoor sports. The reason why the jacket has become the outerwear of choice for all outdoor enthusiasts is determined by its all-weather function. The jacket is not mysterious, it is a jacket, but because this kind of functional clothing came to China from abroad, in order to distinguish it from ordinary clothes, the Chinese people started from its "paraphrase", which was called "jacket".

  7. Anonymous users2024-02-02

    Summary. Hello, there is no way to repair the waterproof layer of the pro-jacket if it is washed off, unless you buy a new one, after all, the fabric is coated when the clothes are produced.

    Hello, there is no way to repair the waterproof layer of the pro-jacket if it is washed off, unless you buy a new one, after all, the fabric is coated when the clothes are produced.

    How do you get rid of white shavings?

    Dear, you wait for me, I'm inquiring.

    Hello, it is difficult to clean up the slag and white chips of the pro-jacket coating. This kind of laminated glue things have a lifespan, generally PU glue surface will appear this problem for more than three years, belonging to the aging of the glue surface, you can repair this repair, but I personally feel that it can't be drawn, because the repair is to use a waterproof strip or hot pressing glue to make up a layer!

    Is there a service?

    You need to buy this from the Internet and get it yourself.

    None of the stores that buy and sell jackets have this service!

Related questions
5 answers2024-04-20

Medium-length cashmere coats believe that everyone has them in their wardrobe, because the length is relatively long, it belongs to a large area of color blocks, and we must pay attention to the self-feeling of the clothes themselves, otherwise it is easy to look cheap in the whole set. In addition, if you want to make it feel textured and tasteful, you also need to pay attention to matching, let's take a look. 1. >>>More

2 answers2024-04-20

I had seen a similar activity on Helly Hansen's Weibo account. >>>More

4 answers2024-04-20

Jacket. In foreign countries, it is often called wind jacket or windproof jacket. The so-called professional waterproofing of clothing features means that whether you are sitting in a wet place or walking in a stormy environment, it can effectively block the invasion of rain and frost and snow, so that water cannot penetrate into the clothes and make you feel wet and cold; The so-called breathability, when the body sweats naturally when doing a large amount of outdoor exercise, ** exhale a large amount of moisture, if it cannot be quickly discharged from the body, it will definitely cause sweat to be trapped between the body and clothes, making people soaked, and in rainy weather, it will make people feel more humid and cold. >>>More

9 answers2024-04-20

Personally, I feel that Hitec and Polar are better under 1,000 yuan.

8 answers2024-04-20

Columbia is a brand in Fujian, and the specific OEM you have to ask their company.