Why is my wifi connected to my own mobile phone and there is no signal, and other mobile phones are

The mobile phone is connected to wifi, and there is a signal but no network for the following reasons:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Shut down and restart to try. If it doesn't work, let's double clear it.

1. If the mobile phone is not connected to other wifi, there may be software or hardware failures in the mobile phone, you can reset the mobile phone to the factory state to rule it out, or the mobile phone after-sales service center professionals will conduct a comprehensive test of the mobile phone software and hardware;

2. If the mobile phone is just a wifi can't be connected, it is recommended to use the following methods to troubleshoot:

1) If there is a software error in the operation of the mobile phone, cat and wifi router, it is recommended to power off the mobile phone, cat and wifi router and restart it.

2) Reduce the distance and physical obstacles between the mobile phone and the wifi router to ensure good wifi signal coverage quality;

3) Check whether there are too many people connected to the wifi or are watching, playing, or files, resulting in the overload of the wifi router hardware and the inability to respond to your network requests;

4) Check whether there is a strong source of radio interference around the mobile phone and wifi router, which affects the quality of wifi signal transmission between the mobile phone and wifi router;

5) Check whether the WiFi router configuration restricts the network connection of the mobile phone or the WiFi router system firmware version is too old, and there is poor compatibility with the mobile phone, it is recommended to upgrade the WiFi router system firmware to the official latest version to try.

6) Take other mobile phones to test whether the wifi router can be connected, if it is not connected, there may be software or hardware failure of the wifi router, you can first reset the wifi router to the factory state to eliminate, if it still fails to solve the fault, it is recommended to replace the wifi router (some mobile phones do not support Chinese SSID (wifi name), it is recommended to set the wifi name to English under the attempt).

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Why is my wifi connected to my own mobile phone and there is no signal, and other mobile phones are connected to have a signal

1. If the opportunity allows; Restart the wireless router; See if it can solve the problem 2. Make sure that the phone is within the wireless network coverage, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable, log in to the management interface of the router 4. In the wireless settings - basic settings, the channel is between 1 and 11, the wireless function has been turned on, and the router is restarted.

2: What should I do if the wireless signal is searched and the connection is unsuccessful 1. The unsuccessful wireless connection may be caused by the incorrect setting of parameters such as the wireless password. 2. Make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Hope it helps, dear.

The phone is connected to wifi, there is a signal, but there is no network:

The first case: If you use 360pps to use GPRS to surf the Internet, the solution is to turn off the 360 disable network switch, and then restart it.

The first two cases: it is a problem with the mobile phone itself, before the network you remember the password, as long as the AP is turned on, it will be automatically connected, but sometimes there will be a wifi display connection normal, but the problem of not being able to access the Internet. The solution is to delete the network on the phone, then reset the password of the AP, and re-establish the connection between the phone and the AP.

When <> mobile phone is connected to wifi, the correct wifi password has been entered, and the mobile phone prompts that it is also connected to wifi, but the network is still not available. There are many reasons for such problems, and the following will talk about how to analyze and eliminate them one by one

1. The wifi itself is a problem. For example, the wifi is not connected properly, so it is not possible to access the Internet.

2. Problems with routers. For example, the router is overheating or damaged.

3. Possible broadband problems. For example, the broadband is in arrears, so you can't access the Internet.

4. Chinese character problem. For example, the wifi name contains Chinese, so some mobile phones cannot connect to the Internet.

5. Mobile phone system problems. For example, there is a bug in the system, so although the wifi has a signal, it cannot access the Internet.

RecommendationsThe solution is as follows

1. Try to use other mobile phones or devices to connect to WiFi to eliminate the problem of WiFi itself.

2. Restart the router, or directly restore the factory settings, and then try to dial up the Internet.

3. You can contact broadband customer service to ask if there is any abnormality in the broadband, recharge if you are in arrears, and then try to dial up.

4. If the wifi name contains Chinese, then it can be directly changed to English or a combination of English and numbers, and then connected.

5. If the above reasons are ruled out, then it is likely to be a problem with the mobile phone system, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Wireless Internet access can be simply understood as wireless Internet access, almost all smartphones, tablets and laptops support Wi-Fi Internet access, is the most widely used wireless network transmission technology today. In fact, it is to convert the wired network signal into a wireless signal, as introduced at the beginning, using a wireless router for the relevant computers, mobile phones, tablets, etc. that support its technology. If the mobile phone has a Wi-Fi function, when there is a Wi-Fi wireless signal, you can access the Internet without going through the network of China Mobile Unicom, saving traffic fees.

Although the wireless communication quality transmitted by Wi-Fi technology is not very good, the data security performance is worse than Bluetooth, and the transmission quality needs to be improved, but the transmission speed is very fast, which can reach 54Mbps, which meets the needs of personal and social meeting informatization. The main advantage of Wi-Fi is that it does not require wiring, and it can not be limited by wiring conditions, so it is very suitable for the needs of mobile office users, and because the transmitted signal power is less than 100MW, which is lower than the transmit power of mobile phones, Wi-Fi Internet access is relatively safest and healthiest.

WiFi is becoming more and more widely used on handheld devices, and smartphones are one of them. Unlike the Bluetooth technology applied to mobile phones earlier, WiFi has a larger coverage and higher transmission rate, so WiFi mobile phones have become a fashion trend in the mobile communication industry. Since the WiFi band is a free band around the world without any telecommunications operating license, WLAN wireless devices provide a wireless air interface that can be used worldwide at an extremely low cost and with extremely high data bandwidth.