-
Not much money, common tools, screwdrivers have a cross, a word, and hexagons, etc., the same buy two, one large and one small, 20 yuan is enough, of course you don't buy professional, or you can't buy a hand, magnetic generally, if not, rub it with a magnet, the multimeter has numbers and pointers, novices recommend buying numbers, more intuitive, but the price difference of this thing is also very large, good hundreds, novices can buy a few dozen dollars,
-
It's not expensive, the plum blossom screwdriver is about 5 yuan, and the multimeter is better, more than 30 yuan
If you just install a computer, you won't need anything else, and if you need to repair it, you can use a lot.
-
There are large supermarkets, but the product is a lot more expensive, but ***, a set of 200 yuan is enough, mainly because the multimeter is expensive, and the watch does not need to be bought too good, and ordinary people can't use it. About 100 yuan is very good.
Electronic City also has these things, which are much cheaper, but some of the quality is a problem.
-
To be honest, all you need to install a Phillips screwdriver is now a Phillips (if possible, a magnetic one is better). Nothing else is needed. It doesn't take a few bucks.
-
All you need to install a computer is a Phillips screwdriver and a few CDs.
-
Cheap ones are also available.
There are expensive ones too. It's up to you.
-
One. Phillips Solution: Phillips Solution, also known as screwdriver, screwdriver or taper changer, is a tool used to remove and install screws.
Since the screws on the computer are all cross-shaped, all you need is a Phillips screwdriver. So why should you prepare a magnetic screwdriver? This is because the computer device has a small gap after being installed, and it is very troublesome to take it out once the screw falls into it.
In addition, magnetic screwdrivers can also hold screws, which is very convenient for installation, so many computer screwdrivers have permanent magnetism.
Two. Flat-mouth unraveling: Flat-mouth unraveling is also known as slotted unraveling. If you need it, you can also prepare a flat knife, which is not only easy to install, but also can be used to open product boxes, packaging seals, etc.
Three. Tweezers: You should also have a large pair of medical tweezers, which can be used to pick up screws, jumper caps, and other small bits and pieces.
Four. Pliers: Pliers are not very useful when installing a computer, but they can also come in handy for some poor-quality cases.
It can be used to remove the bezel at the back of the chassis. These bezels should break off after folding them back and forth a few times by hand, but if the material of the chassis steel plate is too hard, then pliers will be needed to help.
Tip: It's a good idea to have a pair of needle-nose pliers, which can be clamped and plied, so that tweezers are also omitted.
-
Soldering iron: 30-50 yuan.
Set of screwdrivers: 30-50
Multimeter: 50-100
Some commonly used fans, wiring. Dozens.
It doesn't cost much, it's mostly your technology.
-
The standard configuration is about 400-500 yuan.
electric pen 4 yuan; Large flat mouth (also called a slot), large Phillips screwdriver 15-20 yuan; 10 yuan for small flat mouth and small Phillips screwdriver; needle-nose pliers 25 yuan; wire cutter 28 yuan; Diagonal pliers 24 electrician's knife 15; Live wrench (250mm) 30 yuan; wire strippers 30 yuan; Tools are almost 200 yuan; This is the tool in general. The better ones are more expensive.
The digital multimeter is 115 yuan, and the megohmmeter is 120 yuan. If you choose a mechanical multimeter, you can choose MF47 type, ** there are 40-50 yuan, 110 yuan two, the difference is that the meter head is different. The available feel is different, about 40-50 yuan is lighter, and the quality is poor.
About 110 yuan, heavier, better quality.
-
Electric pen 4 yuan, screwdriver 10 yuan * 2, needle nose pliers 35 yuan, wire cutter 40 yuan, diagonal pliers 20 electrician knife 15, tools almost 150 yuan;
The digital multimeter is 80 yuan, the megohmmeter is 150 yuan, and the meter is almost 20 yuan!
-
Go to the market by yourself, ** is different, the quality is slightly worse should be about 200 yuan is enough.
-
You can't bring a screwdriver, but the watch can.
-
Yes. No, it cannot be brought on board.
-
Does installation refer to installation and broadband? If yes, the line tester is a telephone, a set of modem.
In terms of computer room maintenance, the tools should be needle-nose pliers, multimeters, two kinds of drivers, line testers, optical power meters, and network wiring pliers, and the main tools are so much!
-
Installation,The most basic is the system installation disk 2 sheets,A pure version (original),A quick installation version of the ghost disk,The installation disk is updated at any time。 In addition, what is the main purpose of the computer room you maintain? Please specify. The most commonly used basic software packages, tools: network, network cable embedded (network cable crystal head), network cable detector (to detect whether the network cable is normally connected), screwdriver, etc. It depends on the purpose of your computer room.
-
If you don't know what tools you need, are you sure you can fix your air conditioner? A set of common tools necessary for electricians, screwdrivers, wrenches, sockets, hexagons, multimeters, clamp meters, etc., installation also requires percussion drills, hammers, glass cutting tools, etc.
-
First of all, the computer hardware must be ready, such as: chassis, power supply, motherboard, CPU, memory module, hard disk, optical drive, data cable, etc. Other tools to prepare, such as:
Screwdrivers (one cross and one slot, one each), preferably a pair of anti-static gloves, brushes, erasers, etc.
-
1.Generally, a magnetic Phillips screwdriver is sufficient. It's okay if it's not magnetic.
Install the optical drive, power supply, hard disk, and motherboard in the chassis in turn, (note that most of them are in this order) and then install the CPU on the motherboard, the CPU fan, the CPU fan power cable is connected to the motherboard, insert the memory, and the discrete graphics card (no skipping, the motherboard has an integrated graphics card). Then connect the chassis panel cable to the motherboard, and the hard disk cable to the motherboard and optical drive. Connect the power cord to the motherboard, hard drive, optical drive, and discrete graphics card (if the graphics card has one).
Then use a cable tie to clean the line.
OK, cover the side panels of the case, and you're done.
The computer will not open the alarm meeting, see here for details.
2.Just one CPU fan needs to be installed, and the others are installed, such as the power supply fan in the power supply, and the discrete graphics card fan on the graphics card, you don't need to install it by hand. The advanced ones will have motherboard fans, and I believe you won't need them.
ps, the installation of the motherboard jumper (the chassis panel cable is connected to the motherboard) is difficult, pay attention to the case manual and the motherboard manual, connect the corresponding wires, and pay attention to the positive and negative poles.
Generally, there is a power line, the abbreviation is PWR, the reset line, and the abbreviation is res. Built-in speaker speaker cable.
My dad can look at the instructions and try them, it's fun.
-
You don't necessarily know that you need to do this before installing a motherboard on a desktop computer case.
-
What do I need to pay attention to when building a computer? Brother Ming teaches you to understand the main components and uses of computers to assemble.
-
The most important one: wash your hands and put the static electricity off your hands.
Then: 1: Phillips screwdriver.
2: USB disk with XP or Win7 system.
3: Main chassis, power supply, motherboard, CPU, graphics card, memory, hard disk, monitor, keyboard and mouse.
-
1. If you install it yourself, first of all, the computer hardware must be ready, such as: chassis, power supply, motherboard, CPU, memory module, hard disk, optical drive, data cable, etc.
2. Prepare some tools such as: screwdriver (cross and slotted, one each), preferably a pair of anti-static gloves, brushes, erasers, etc.
-
Commonly used tools for electrical assembly include electrician's pliers, needle-nose pliers, electrician's knife, screwdriver, wire stripper, low-voltage electroscope, impact drill, electric soldering iron, multimeter, clamp ammeter, megohmmeter, clamp ammeter, pipe bender, pressing pliers, pipe wrenches, wire tighteners, etc.
Electrical assembly generally has the following work contents:
Make an electrical control cabinet according to the electrical schematic.
Install the electrical instrument according to the control schematic.
Assist the electrical engineer in equipment commissioning.
It can detect and repair simple electrical faults.
-
Electrician's pliers, needle-nose pliers, electrician's knives, screwdrivers, wire strippers, low-voltage electroscopes, percussion drills, electric soldering irons, multimeters, clamp ammeters, megohmmeters, clamp ammeters, pipe benders, pressing pliers, pipe wrenches, wire tighteners.
-
Screwdrivers, pliers, voltage testers, multimeters, insulating tapes.
-
Multimeter, clamp meter, wire cutter, Phillips screwdriver, slotted screwdriver, wrench, electrician's knife, peeling pliers,
-
The tools that must be used (by hand) are also commonly used. Hee-hee.
One. Partition. A partition is a part of a hard disk that is built as a separate storage area, which is divided into a primary partition and an extended partition. >>>More
1. Prepare before purchasing.
Before choosing wood flooring, the owner should first understand the orientation and area of the house, so that before buying wood flooring, a floor plan can be drawn for the master plan, as well as the use of each room. >>>More
If you want to install a computer system, you can try the following methods: >>>More
Even if the optical drive is broken, there is no need to be so troublesome, the method you said, in principle, is not possible, because other people's computers are equipped with other people's hardware, and if you take it to use, it will conflict! >>>More
Hello: According to your description, Samsung phone i8552 does not support installing or moving third-party software to external SD card. You can set the camera file and **file storage path to SD card in advance, to free up the phone's memory, specific operation: >>>More