The mobile phone can be used when it enters the water, but it can t be charged, and how much does it

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses. Actual ** subject to the test of the service center.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

If you are using a Huawei phone.

It is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance, as continuing to use it or repairing it at an unofficial service store may further damage the internal components. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

4.If there is no backup data.

There may be a risk of data loss when repairing. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Customer Service Center.

Boarding service. Repair spare parts** inquiry.

Make an appointment for service.

Turn off the phone, take out the ** card, and go to the mobile phone repair point as soon as possible for dehydration and drying treatment, 30 yuan.

Love**dispose of the buy a new one, repair the cost with the new one**.

Of course, I went to the repair shop to repair it. This needs to be disassembled to view,There is still water in the fuselage**,Dry the place where the water is stagnant,If this part is broken,You have to replace this part。

Summary. If the phone cannot be charged after being flooded, it is usually caused by a short circuit in the charging interface or line caused by water. In this case, you can try the following methods to fix it:

1.Immediately disconnect your phone from power and unplug the charger and battery (if removable). Prevent short circuits from further damaging the phone circuit.

Use absorbent paper to absorb surface moisture.

If the phone cannot be charged after being flooded, it is usually caused by a short circuit in the charging interface or line caused by water. In this case, you can try the following methods to fix it:1

Immediately disconnect your phone from power and unplug the charger and battery (if removable). Prevent short circuits from further damaging the phone circuit. 2.

Shake the phone to shake the water out of the charging port and earphone port. At the same time, turn the phone upside down, so that more water flows out of the interface. Use absorbent paper to absorb the water on the surface of the water.

3.Use a blow-off residual grinder to blow into the charging port and earphone port in the cold air setting, blow out the water droplets remaining in the connector, and dry the surface at the same time. Do not use high-temperature air to avoid the rapid evaporation of water and the scaling of minerals.

4.Put the mobile phone into an airtight plastic bag, add about the same amount of desiccant as the volume of the mobile phone (silica gel drying packet or rice flour without flavor), and take it out and wipe it after 12-24 hours. Allow the desiccant to absorb the residual water retention in the hopper.

5.If the above methods do not work, you can try using alcohol to disinfect and dehumidify the charging port of your phone. With the phone port facing down, drop an appropriate amount of 75% or more medical alcohol, then absorb and wipe with a cotton swab.

After the alcohol is volatilized, connect the charger for testing. 6.During use, regularly check whether there are foreign objects or stagnant water in the charging port and earphone port.

Clean and blow dry in time to reduce the chance of water or moisture entering the body. Excessive disinfection can also cause damage to the charging port, so alcohol treatment is only recommended if necessary.

Finally, the immediate measures of water absorption, blowing, concealment and isolation are the most critical steps after fixing the water ingress of the phone. If dealt with promptly, most phones can be repaired to normal use. However, if the water has not been treated for a long time, the water has been damaged and it is difficult to simply treat and repair.

Replacement parts are required or contact after-sales customer service to return to the factory for repair.

1.Shutdown: First of all, after the mobile phone gets into the water, it should be turned off immediately to avoid damage to the circuit board due to moisture.

2.Disassembly: Then, you can disassemble the phone, remove the battery, circuit board, etc., and wipe it clean with a clean rag to avoid moisture from seeping into the inside of the circuit board.

3.Drying: Put the removed batteries, circuit boards, etc. in a ventilated place and let them dry naturally, which generally takes more than 24 hours.

4.Inspection: After drying, you can use a detector to check whether the circuit board is damaged, if not, you can assemble the phone and power it back on.

1. Other functions can be used after the mobile phone is flooded, but it can't be charged, it may be that the water inside the handsail has not been dried. Don't use your phone just yet, dry it thoroughly before you try again.

2. If it still can't, it means that there is a short circuit inside the mobile phone, and it is recommended to go to the repair shop of the accessory for maintenance.

3. Secondly, if the other functions of the mobile phone are used normally, the problem of the mobile phone charging cable or charger can also be eliminated.

4. If there is a problem with the charging cable, you only need to replace a cable and try again.

5. If it is a problem with the charger, you only need to change the charger or see if the charger has obvious heat.

6. Also check the various interfaces of the mobile phone, and wipe the water clean with a cloth.

Regardless of whether the phone is on before it is dropped, quickly remove the battery. Then throw a few times at the side with more openings on the phone (such as the data cable interface), or the side with a large gap, and throw out the water in the phone. Hold the phone when you throw it, otherwise if you throw it out, you can be ready to buy a new one.

Summary. Hello dear<>

Glad you have a problem The phone can be used when it gets into the water, but it can't be charged.

1. Once the mobile phone is flooded, if it is automatically turned off, it must not be turned on immediately for the condition of the mobile phone;

2. If it falls into sewage or corrosive liquid, in addition to removing unvolatile water stains, if the pollution is serious, the impurities must be vibrated out with the help of ultrasonic washing, and then the circuit board is dried by air;

3. If the mobile phone can still be used after water penetration, it also needs to be sent to a professional for treatment, so as to avoid corrosion and disconnection of the circuit board, resulting in irreversible repair;

4, Apple motherboard is particularly fine, water ingress will only cause local damage, it can be completely repaired, after the mobile phone is flooded, timely repair can be completely restored, the maintenance cost is also low, do not because of a fluke, the internal components of the mobile phone are damaged, increase the maintenance cost, cause unnecessary losses.

The phone can be used when it enters the water, but it can't be charged.

Please wait patiently for a few minutes, it is being sorted out, and we will answer you immediately.

Hello dear<>

Pretend to roll is very happy for your problem The mobile phone can be used in water but cannot be charged 1, once the mobile phone is in water, if it is automatically turned off, it must not be turned on immediately for the condition of the mobile phone; 2. If it falls into sewage or corrosive liquid, in addition to removing unvolatile water stains, if the pollution is serious, the impurities must be vibrated out with the help of ultrasonic washing, and then the circuit board is dried by air; 3. If the mobile phone can still be used after water penetration, it also needs to be sent to a professional for treatment, so as to avoid corrosion and disconnection of the circuit board, resulting in irreversible repair; 4, Apple motherboard is particularly fine, water will only cause local damage, can be completely repaired, after the mobile phone into the water, timely repair can be completely restored, the cost of maintenance is also low, do not because of a fluke, so that the internal components of the mobile phone are damaged, increase the cost of maintenance, cause unnecessary losses.