What happens when a disc is burned to 0 bytes once, and the disc is displayed as zero bytes after be

You use the burning software that comes with the system, and it defaults to the multiple burning method, that is, if it is not full for the first time, you can continue to engrave it! This method has one of the biggest problems: one is that it engraves the plate, with other optical drives or software, do not recognize!

The second is that when you do the later burning, the content of the front is easy to be corrupted. So it is not recommended to use it.

When you use Nero, you encounter the first situation I mentioned above, Nero doesn't recognize it, thinking that it is a plate that has been carved and can no longer be carved.

If you burn a new plate directly with Nero, it also has a "multi-burn" option, and you can also burn it again when it is not full for the first time, but there are also two problems I mentioned above. So it is not recommended to use this way.

This is two different from the rewritable disc that my friend upstairs said: even if it is rewritable, when burning, it is the same as a normal disc! The same problem exists.

However, it can be erased and re-burned (it must be erased, i.e., formatted, in order to be re-burned.) Otherwise, it's the "multiple burning" mentioned above).

If you think it's easy to use the system, then continue to use it, the burning disc has a one-time one, if it is not full, as long as it is not encapsulated, you can continue to engrave, this kind of disk is generally about one yuan; There are also those that can be burned repeatedly, ranging from 2 yuan to 40 yuan, and can generally be burned 20-80 times.

Burning a disc is a one-time and will show 0 bytes as long as you have the action of burning.

You carved it away, so let's get it again. Which can only be burned once.

The question is not very specific, but here are some examples:

1. Put the disk on another computer to see if it is a problem with the CD.

2. In win7, many discs cannot be recognized and opened. This issue is caused by a feature in Windows that can be used to prevent you from browsing the open disc directory and only load auto-run programs or auto-files, if you don't have it you can't use it, disabling this feature will fix the problem. This problem is especially acute for discs that you burn yourself.

It is manifested as an optical drive that does not read the disk. Workaround:

a. "Run", enter OK, and quietly open the local service manager;

b. Find the following service: shell hardware detection.

c. Double-click this service, set the "Start-up Excavation Configuration" to "Disabled", and click the "Stop" button below.

d. The restart takes effect.

What system is used and what is the specific prompt content???

1. Put the disk on another computer to see if it is a problem with the disc.

2. In win7, many discs cannot be recognized and opened. This issue is caused by a feature in Windows that can be used to prevent you from browsing the open disc directory and only load auto-run programs or auto-files, if you don't have it you can't use it, disabling this feature will fix the problem. This problem is especially acute for discs that you burn yourself.

It is manifested as an optical drive that does not read the disk. Workaround:

a. "Run", enter OK to open the local service manager.

2.Find the following services:

3.Double-click the service, set the Startup Type to Disable, and click the Stop button below.

4.The reboot takes effect.

The boot area of the disc is broken! It's useless!

So what else to ask? It's a matter of disk.

Burned. Compact disc.

The hint is an empty disk: you first look at the burning surface with the light, is there any trace of burning? Burned discs have a difference between light and dark colors. 1.

If there is no difference, the note is not burned on. The most likely is that you didn't select the "Current Burner" drive in the burning interface, so.

Software. Automatically add the content of Sun Libu as the default.

Image file. Burn (actually save) to the image

recorder”

Burn "to the hard disk." After entering the burning interface, select the "Current Recorder" drive at the top (the model of the recorder should be displayed), select your recorder and burn again. 2.

If there is a difference in color, it means that it has been burned, but it cannot be read. This is divided into several situations: first, the burning is incomplete, and the import and export program is missing; second, the quality of the blank buried noisy disc is poor; third, poor recording quality; Four is yours.

Drive. Recorder) due to reduced performance, dirty bald head, etc., pick the plate. There are also some uncertainties.

The solution is to take this disc to a different optical drive to read, and it is better to find more than one optical drive to read. If there is an optical drive that can be read, it is your optical drive.

Pick. or the disc burning quality is not good; If none of them can be read, it's a problem with the disc, and there's no good way to do it.