How to install the upper beam of the suit door, and the detailed installation method of the suit doo

The installation with the light is actually similar to the one that does not bring the light I mainly see whether the sleeve is integrated or 2 sections If it is integrated, directly nail the middle ridge to the door stop head of the two vertical sleeve boards to group the frame The place where the middle ridge needs to be installed with glass and fixed with glass strips If it is 2 sections, first connect the disconnected vertical sleeve board, middle ridge, and horizontal sleeve plate to form the door frame The following steps are the same as the normal door I don't understand Call **Ask me Liwanjia Wood Sales Department 0534-5670699 5678922

Didn't people tell you about this when you bought it?

Because the situation you are talking about, not everyone has encountered it, and the description is not very clear.

I guess there is a manual for this door.

If you don't know how to install it yourself, you can let the professional construction team install it, or you can let the merchant install it for you when you buy the set door.

It's not enough to find a professional master.

Points and tips for the installation of the set door.

1.Proofread the holes.

Whether the size of the opening meets the installation requirements, and the necessary treatment should be given if it does not meet the requirements.

2.Unpacking. Check whether the door frame, door sleeve line, door barrier strip, sealing strip, and parts are complete.

3.Assemble the door frame.

When the door frame is assembled, the overlap between the mullion and the transverse frame must be glued and then fixed with self-tapping.

4.Position the door frame.

The door frame is in place according to the indoor elevation line, first clamp the door frame from the perimeter of the door frame with a wooden wedge, and then support the door frame from the inner mouth of the door frame with tooling and a wooden wedge, and adjust the verticality, levelness and inner diameter size of the door frame by clamping the inner and outer wooden wedges of the door frame, so that it meets the design requirements (the gap between the door frame and the door leaf, and the door leaf and the ground are 5-8mm).

5.Glue filling of door frames.

Before filling the styrofoam between the door frame and the wall, the wall should be cleaned first, the wall should be moistened with a watering can, and the styrofoam should be filled.

6.Install the door sleeve wire.

After 4-6 hours of styrofoam curing, remove the tooling and wooden wedge, apply glue in the door frame socket, and then embed the door sleeve line into the door frame, and gently knock and compact to make the door sleeve line and the wall fit tightly.

7.Install the door leaf.

Pay attention to the opening direction of the door, install hardware, and the gap between the door leaf and the door frame meets the design requirements to ensure that the door leaf is open and closed flexibly.

Before installing the set door, you can check whether the size of the opening meets the installation requirements, and if it does not meet the requirements, immediately readjust it. Clamp the door frame around the door frame with a wooden wedge, and then brace the door frame with the tooling and the wooden wedge at the inner opening of the door frame. By clamping the inner and outer wooden wedges of the door frame, the verticality, levelness and inner diameter size of the door frame can be better adjusted, and finally the design requirements can be met.

The installation steps are as follows:

1. First of all, you need to measure the size of the door frame, and then go to book the door of the suit. The length, width and height should be measured, and the solid wood door should be customized by a guaranteed merchant or brand.

2. Disassemble the packaged door frame, put the door frame on the floor first, place the frame and top plate, and then nail the iron nail to fix the frame first.

3. Nail a few pieces of iron sheet on both sides of the frame, and then fix them on the wall. Attach the sealing strip on the door frame and press it to fit.

4. Raise the door frame, and then lean on both sides of the wall, pay attention to keep the balance on both sides, do not tilt, and then nail the iron nail to fix it.

5. Unpack the door panel and install the butterfly hinge at the appropriate position on the door panel. Then put the door panel on the door frame, make a mark first, and then screw the butterfly hinge lock and fix it on the door frame.

6. After the door frame and door panel of the suit door are installed, it is necessary to start installing the door frame line. The place where the lines cross should be dealt with well, and attention should be paid to the connection without affecting the aesthetics.

7. After the set door is installed, it is necessary to start installing the lock. The door lock should be beautiful and firm, check the installation instructions, and then install the lock hole.

Mounting conditions for the set door.

1. The installation of the set of interior door products must be installed after the reserved opening, and it is strictly forbidden to install the masonry while installing or installing the masonry after the opening.

2. The set of interior doors must be installed after the completion of ground engineering operations such as grinding stones, floor tiles and wooden floors, and after the completion of wall coating operations.

Set door installation tool.

Electric hammers, carpentry hammers, files, planers, hacksaws, flat screws, angle rulers, circle rulers, hanging hammers, etc.

Set door installer.

1. Assemble the door frame.

1) On the flat and smooth ground, use a diameter electric drill to lead a 30-40mm deep nail hole at the upper end of the mullion, and use 4 80mm long yuan nails to connect the horizontal frame with the two mullions firmly (the three frames are on the same plane; The gap between the inner mullion and the horizontal frame is smaller, and the two horizontal frames are at a 90-degree angle with the mullions).

2) Fix 6 connecting pieces on both sides of the mullion.

3) "Turn over" the assembled door frame on the ground, and fix the other 6 connecting pieces with yuan nails (check: whether the angle is 90 degrees, and whether the inner width of the lower three points of the door frame is consistent).

4) After checking that it meets the requirements, "pre-fit" the door leaf and the door frame (with the side with the mouth). The gap between the two sides of the door and the door frame is required to meet the requirements.

2. The door frame is connected and fixed with the wall.

1) Move the assembled door frame into the door opening as a whole (the two sides of the door frame are on the same plane as the two sides of the wall; Use a drop lance to check whether the door frame as a whole is perpendicular to the ground).

2) Take the nail hole of the connecting piece as the point to determine the twelve drilling points on the wall.

3) Use an 8-10mm diameter electric hammer to drill holes in the hole point, nail into the wooden wedge in the drilling species, and fix the connecting piece on the wall with a nail.

4) Inlay wooden strips between the fixed door frame and the wall and in the joint, so that it is neither too tight nor too loose, so that the door frame and the wall are connected and fixed.

3. Install the door leaf.

1) Remove the hinge groove, and the decorative surface of the suit door shall not be damaged during the operation.

2) Install the hinge. Before nailing the wood screws, first lead the nail eye, then nail the wood screws and tighten them (the upper and lower hinges first tighten a screw, and then close the door to check whether the gap is compliant, check whether the mouth and the door leaf are on the same plane, and whether the door leaf has fallen. Tighten the other screws after it is correct, and it is strictly forbidden to "drive" the screws directly into the door frame).

3) Install the door lock (after the door lock is installed, pay attention to comprehensively check whether the door lock switch is flexible and whether the seam is compliant).

4. Install the door sleeve line and door file strip (two-in-one structure).

1) The sleeve and the gear strip are equipped with a concave installation nail groove, and the door sleeve wire shell and the door strip shell are fixed on the door frame with 20-25mm yuan nails, and then the bead core and the door strip of the door sleeve line are installed on the sleeve shell and the door strip shell with glue.

2) The door sleeve line and the door strip should be cut at a 45-degree bevel angle (pay attention to polish the bevel with a flat file or woodworking planer, and the junction of the two corners of the bevel angle is a line and the seam is tight and flat, and the seam is glued firmly).

First of all, the position of the door sleeve should be adjusted: the grounding gap of the door, the amount of gap between the left and right sides of the door leaf (about 3 5 mm on one side), and the other is whether the upper and lower parts of the door sleeve are correct, and whether the left and right sides are on the same plane.

After adjusting the approximate position of the door cover, put the door leaf on it for comparison. Look at the grounding gap of the door, whether the left and right door gaps are suitable, and then see if the door leaf is on the same plane as the door cover (that is: see if there is a gap between the door surface and the door sleeve contact surface).

After the door sleeve is adjusted, it is time to fix the door sleeve. Generally, it is fixed with a special line card, and then fixed with foaming agent caulking.

All that remains is the hanging door, the lock and the door suck. It's all about carpentry. All need to accumulate experience in the future!

I'm just making suit doors, and I won't be able to do it at first! It's okay to do more.

The most important thing to install the door is to fix the door cover! The door sleeve is well adjusted, and the following process is carried out! It's easy to lock the hanging door! Ordinary people can pretend, but it's a matter of time!

The set door generally refers to the composite door with solid wood as the main material, the external pressure pasted MDF as the balance layer, the domestic or imported natural wood veneer as the finish, made after high temperature hot pressing, and the external spray decoration of high-grade environmentally friendly wood paint, in short, from the inside to the outside are required to be wood. From a scientific point of view, it is called a "solid wood composite door". The installation steps of the set door are as follows:

1. Please place the goods horizontally on the ground and do not lean on the ground when they are to be loaded. 2. Unpainted products should be painted within five days. 3. Try to avoid long-term exposure to outdoor sunlight to prevent the wooden door from being heated.

4. Keep indoor air circulation to prevent the wooden door from getting damp frequently. It is recommended to find a professional master to install it, and now it is generally free to install when buying a door.

Installation method: 1. Expansion bolt installation method.

1. First measure whether the size of the hole is consistent with the size of the door frame, if it is smaller than the size of the door frame, the excess gray skin should be removed.

2, the anti-theft door opening position upright, so that the frame decorative edge and the wall are tightly attached, according to the frame side of the 6 holes after the mark, the door frame is moved out of the hole, and then with a drill bit drilling, the door is pushed into the hole, drive into the M10 steel expansion bolt, tighten the nut with a socket wrench.

Second, the method of filling cement.

1. If the frame is polyurethane foamed, there is no need to fill cement; If there is no polyurethane foam frame, it must be filled with cement, so that there is no hollow in the security door and the edge, and the installation is more firm.

2. Before filling cement, use a paper pad between the door frame and the two sides of the door leaf, and close the door for filling.

3. When filling cement, do not squeeze too much, so as not to deform the door frame and affect the opening.

4. Remove the paper pad after filling the cement for 6 hours, open the door, and clean the cement at the keyhole of the door frame.

First, install the door frame, place it into the door opening, and fix it with wooden screws, then start drilling the counterbore holes and fix them with expansion screws. Then use styrofoam or cement slurry to fill the gap between the door frame and the wall, and after it dries, the door frame line is glued, and the door stop line is nailed with a nail gun. Finally, install the door leaf according to the position of the door frame hinge.

The first step is to assemble the door cover. First, find out the door sleeve and the vertical plate, align the joint according to the back number, and the mouth should be on the same plane, and the glue should be applied at the interface.

2 6 The second step, install the door cover. Put the assembled door sleeve into the door hole as a whole, use small wooden strips to roughly fix the door sleeve around, the two sides of the door sleeve should be on the same plane with the wall, and then check whether the door sleeve is perpendicular to the ground as a whole, whether the two angles of the top plate of the door sleeve and the two vertical plates are right angles, whether the door sleeve vertical plate is bent, and twist the iron sheet at both ends to make it wrap the wall.

Baoding Holz wooden door, China's top ten brand wooden doors to join the investment.

Advertisement 3 6 The third step, install the door leaf. Open and close the slot first, and the distance between the hinge slot and the two ends of the door leaf is 1 10 of the height of the door leaf.

Wooden door installation comes to 58.com long-term warranty!

Advertisement 4 6 Step 4, install the door lock. After installation, check whether the door leaf and door lock switch are flexible, whether the seams are flexible, and whether the seams meet the specifications.

Taiming Door Industry Steel Door Office Door Manufacturer Mass Customization is trustworthy.

Advertising loves procurement.

Advertising Hotel Medium Door Closer Manufacturer** Automatic Door Closer Door Closer Door Closer Hydraulic Cushion Medium Door Closer Access Control System.

51 yuan. View 5 of 6

The fifth step is to install the door sleeve line. Cut the door sleeve line with right-angled edge into a 45-degree angle, trim it with woodworking, insert the right-angled edge into the door sleeve groove, and glue the door sleeve line and the door sleeve board firmly with floor glue.

This problem is also occurring in my family now, but what can I do? It's all old and sad.

Hehe, it's hard to solve. Is there a specific **.

First of all, the door cover is horizontal and vertical with a level, and the side of the hinge must be fixed first, and the glue is dried before hanging the door, and then the door is closed to the appropriate door gap, and then fixed.

There is no problem with the upper beam, the upper beam is mainly to maintain the stability of the house structure, and the decoration has not affected it for a long time.

- Chinese Home Furnishings 360

There are already door lintels on the interior doors.

The door to the balcony feng shui solution + if the balcony is facing the door, the curtains can be closed for a long time as a block. The position of the entrance and exit door should not be facing the balcony, which forms the so-called "piercing the heart", and it will not be easy to gather wealth at home, and it is easy to break the wealth. + An entryway cabinet can be placed to separate the door from the balcony.

Place a fish tank at the entrance of the gate (those who hit the water cannot put the fish tank, they can replace it with a screen). + Make a balcony window to block the balcony or plant potted plants and climbing plants. + Facing the kitchen, the curtains can be closed for a long time.

Hang curtains + If you enter the door is a long corridor, you can hang bead curtains and gauze curtains! After making a porch at the entrance door, the direction of the air flow changed, and the force of the air was slowed down, so that the air stayed in the house for a longer period of time. The entrance location can also be used for screens, decorative cabinets.

In addition, the office is generally a single room, and there is nothing to open the door and see the window, so there is no need to go to other rooms. However, in order to solve the problem of wearing the hall, many units also made a porch at the door, and the porch was a unit signboard. That's good.

Living room balcony + add curtains directly to the balcony window + If the above method cannot resolve the entrance door facing the balcony, there is also an infrequently used method, which is to use a thick curtain to close the window facing the door, and naturally resolve it.