Does the Tianlang speaker have sand? What should I do if the speaker only has one ring

The Tianlang speaker is not loaded with sand, because the sand contained in this one will cause the resonance of the impression, and then its effect will not be so good.

There is no sand in the stereo, because the weight is relatively light, and it is full of electrical components.

Although the internal structure of our speakers is not the same. But Tianlang stereo didn't have sand in it, he took some filler similar to sand.

How can there be sand in the stereo? Or when you ask a question, the word is typed wrong, and it is impossible for the Tianlang speaker to hold sand, unless it is accidentally dropped into the water.

Hello, there is no such thing.

There's no sand in it.

No, it won't.

There is no sand in the speaker, there is no use in loading sand, the speaker is for listening to songs.

It is very normal not to have sand, and the general impression is that there is no sand, but a small new one.

Of course, there is no sand in the speaker, this is an electronic device, it is a fine accessory, and it is impossible for sand to appear in it.

Tianmu speaker is not loaded with sand, what is it doing with sand? There can be sand.

Tianlang speaker is not loaded with sand, it is loaded with sand, and the sound quality will be different.

Does the Tianlang speaker have sand? This is not clear, or consult and ask, or make a **, or use other methods?

Does the Tianlang speaker have sandThe Tianlang speaker does not have sand, why do you need sand?

Hello, there is generally no sand in this stereo, you can take a look at his manual, where it is written.

If there is no problem with the driver and sound card, and the headphones can listen to songs, there will be no sound when the headphones are unplugged, that is, the speaker is broken.

Cause 1: Cable problem.

Solution 1: Swap the two pairs of wires connected to the speaker to see if the speaker still doesn't sound. If the speaker still doesn't sound, the components in that speaker are damaged; If, after changing the cable, the original speaker that did not sound rings, and the speaker that originally sounded does not sound, it is that the computer audio and the previous part are faulty.

If both speakers sound after changing the cable, it means that the original cable is loose.

Reason 2: Poor plug contact.

Solution 2: Check the connection cable from the computer to the computer audio, whether one of the wires is loose, or whether the plug is not in good contact, and plug it back in. Check whether the connection cable from the computer speaker to the speaker is in poor contact or loose.

If it still doesn't solve the problem, it means that there is a fault inside the computer speaker, or there is a fault with the computer sound card.

Cause 3: The sound card is set up in error.

Solution 3: If it is a problem with the setting of the sound card, please open the settings interface of the sound card in the control panel (or double-click the small speaker icon of the system tray) to check whether the channel balance is adjusted to the middle, if not, please adjust the balance of the left and right channels to the middle.

Reason 4: If the settings are fine, it may be a hardware failure of the sound card, a failure of the output jack of the sound card, or a failure of the power amplifier or speaker.

Solution 4:

a.Plug the sound card output jack into the headphones, if the left and right channels of the headphones are ringing, it is a problem with your speaker amplifier line or a speaker cable is broken, if the headphones are also not ringing for one channel, it may be a sound card failure or jack failure.

b.If the two speaker jacks can be interchanged, the left and right channels are reversed, if the other speaker does not sound after the modulation, it is the power amplifier failure, if the speaker does not sound after the modulation, it is the horn failure.

c.If you can confirm that the amplifier or speaker is faulty, please go to the merchant to get a new one. If it is confirmed that the sound card is faulty, it can only be repaired by the host (the independent sound card can replace the sound card, and the integrated sound card may need to replace the motherboard).

The mobile phone speaker is very cheap, the unit price is less than 3 yuan, the maintenance fee may be different in various places, and the conditional DIY is there, and there is no way to find a maintenance point.

This is mostly due to the poor contact of the audio signal line or speaker line, which is generally not the problem of the speaker. In addition, adjust the volume potentiometer to see if there is a phenomenon of volume fluctuation, if there is a situation of fluctuation, it means that the volume potentiometer is seriously worn, the potentiometer should be disassembled for cleaning first, and then add some lubricating oil, and then adjust the reed of the contact point to change the position, but it is best to replace the new potentiometer as appropriate.

Listen to what you said about this situation should be the horn's connection has a problem, due to your long-term use, the horn's two lead wires are virtually connected, repair it yourself, you have to find the old test radio rod line, because this kind of wire is more shock-resistant, replace the two leads of the horn, to use welding, and after welding must be glued firmly, otherwise it will not take a few days, but also pay attention to the fact that the line you just replaced can not be left too long, otherwise there will be noise, after the replacement with a No. 5 battery to try the sound is completed,

The voice coil of the speaker is broken, replace it with a speaker of the same size!

Troubleshooting and troubleshooting of computer without sound, detailed steps, easy to learn!

One is the problem of the driver, the other is the problem of setting, to see if it is not in the setting (you can double click the speaker icon in the lower right corner, you can set) whether there is only one channel with sound, and the other is off, and then try to set the balance in the middle position.

For desktops, if the back panel is plugged in, disable the front panel in the Audio Manager.

It's mostly a problem with computer settings, you first open the volume manager to see if it's muted, or uninstall the sound card and reinstall it!

Check the sound first, if you don't look at the socket, most cases have problems that will cause no sound when the audio headphones and microphones are plugged in.

Problems with the sound card settings??

Is your stereo broken, or go buy a separate sound card to see!

The solution to the failure of the host built-in speaker is as follows:

1. When the built-in speaker of the host is faulty (abnormal noise or no sound), it is recommended that you connect the headphones to test and confirm whether the headphone output is normal. If the sound of the earphone output is normal and the built-in speaker of the host is abnormal, there may be a problem with the built-in speaker of the host, and it is recommended that you report the machine for repair.

Note: Split desktop PCs generally do not have built-in speakers.

2. If you connect the headphones for testing, the sound of the earphone output is also abnormal, it is recommended that you reinstall the sound card driver.

3. After installing the sound card driver, if the problem is solved, it is possible that the fault is caused by a problem with the sound card driver.

4. After installing the sound card driver, if the problem is not solved, please consider restoring or reinstalling the system after backing up the data, or report the machine for repair and let the service station engineer help you detect and repair.