Skyworth IPTV set top box E8250 can t be wired to the TP Link router

Home Network Environment Cabling:

1. There is a telecom cat: the telecom cat --- router WAN port; The LAN port of the router --- the computer;

2. No telecom cat: network cable --- router WAN port; The LAN port of the router --- the computer;

Set up router dialing:

Automatic acquisition of computer IP and DNS settings;

1. Enter the router. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password as prompted, and save;

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next is to select [Auto Connect], Save, and Exit;

3. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference. You can also set a password for your Wi-Fi connection.

Is the TV fixed now? Mine is also Skyworth TV,55e690u。 The same is the TPLink route.

My symptom is that the wireless connection is on and everything works fine. However, if you use a wired connection, it shows that it is connected, but there is no data, the measured network speed is 0, and my home network is a telecom 50m optical fiber.

I looked for customer service and they didn't check out anything wrong. I checked it when I just bought it last year, and I tried to upgrade the system and restore the factory, but I didn't solve it, and the maintenance staff said that the network speed was too slow (it was 3m network speed at the time). This is still the case after switching to fiber this year.

I found customer service again and sent it for repair, and the customer service said that it was normal for them (I didn't see it with my own eyes), and it may be that my route does not match. I don't know.

Skyworth smart network set-top box E8205 is equipped with WiFi.

How to connect to wifi:

1. Press the "Menu" button of the TV remote control to find the "System" option;

2. Find "Network Settings" in the system menu and enter;

3. Click "WiFi Switch" to open, as shown below, and enter the wireless connection settings;

4. Click to open the wireless wifi network page after a lot of wireless network names will appear, find your own wireless network click to enter;

5. Enter the correct password of the wireless route to open the wireless network;

6. Successfully connected to the wireless network.

Yes, you just need to have a wireless network at home

It is not to receive Wi-Fi. I think it's possible to connect via Wi-Fi. The heel of the wired connection is stable.

This is a common function of wireless set-top boxes now, and it can be used after opening.

Steps to connect your phone to your set-top box:

First of all, it is necessary to confirm that the set-top box is a smart TV, that is, a set-top box that supports the "multi-screen interaction" function, and not all set-top boxes can be connected through a mobile phone.

If Multi-screen Interaction is supported, you can follow the steps below:

1. The set-top box is connected to the home wireless wifi, which can generally be found on the system settings page;

3. Connect the mobile phone to the home wireless wifi network, which must be on the same network as the set-top box;

5. The set-top box can be easily operated through the built-in functions of the mobile phone APP, including**TV screen, mobile phone**, **, **push to the set-top box, open your hand to the TV and install software.

Multi-screen interaction refers to a function in which the terminal interconnects the device through wireless wifi and shares multiple information in the home network environment.

with a mobile phone. Just push.

The connection method of Skyworth intelligent network set-top box is as follows:

1. Prepare an HDMI cable, which is usually included when you buy a set-top box.

2. Insert one end of the HDMI cable into the HDMI input interface of Skyworth LCD TV, and the other end into the HDMI output interface of the network set-top box.

3. Start the TV and set-top box, switch the signal source of the TV to HDMI mode, and the picture of the set-top box can be displayed, indicating that the TV and the set-top box have been successfully connected.

4. The user can use the remote control of the set-top box to operate, set up the network set-top box to connect to the wifi signal at home, and then use the set-top box ** online movies, TV series and other network TV programs after networking.

Is the source switch right?

Are you sure your network cable has a signal?