Is it normal for BYD S62 4 to idle six or seven hundred

Updated on Car 2024-04-05
11 answers
  1. Anonymous users2024-02-07

    Normally, the general idle speed is between 600 and 800, and the idle speed of my car is 800

  2. Anonymous users2024-02-06

    Hello, this situation is normal, low idle speed can save fuel consumption.

  3. Anonymous users2024-02-05

    This idle speed is very normal, as long as the car does not stall, you can drive with confidence, the idle speed setting is low, the main thing is to reduce fuel consumption!

  4. Anonymous users2024-02-04

    This is normal, and low idle speed is mainly to reduce fuel consumption.

  5. Anonymous users2024-02-03

    Hello, this situation is normal, don't worry, as long as the idle speed does not shake.

  6. Anonymous users2024-02-02

    Idle normal range, yes. You can save some fuel.

  7. Anonymous users2024-02-01

    Is it normal for BYD to idle six or seven hundred The main reason why there is no problem with the parts of the new car is that it is not burned well, and the quality of the fuel added recently is related, and it is not that refueling at a large gas station and adding 98 is equivalent to no problem. The phenomenon is that if the oil is not extinguished, and the oil is not extinguished, then the fuel injector may be a little blocked, or there may be slightly more impurities in the oil circuit and fuel tank. Impurities in the oil circuit will affect the combustion jitter.

    How can there be so many impurities in a new car? This has nothing to do with the new car, even if the large gas stations have cleaned the underground oil tank, no one will guarantee that the oil impurities added each time will not exceed the standard. And the gas station has to be clean, not to mention that the fuel tank of our car is not clean, and the oil circuit is definitely not clear...

    Direct injection engine is not like EFI, direct injection is very sensitive to fuel combustion, and a high compression ratio is also an important factor in sensitive combustion... Therefore, it is recommended that you clean the refueling tank with Si Youpu cleaning agent, which is generally clean after 500 kilometers, and there is no major problem with the new car. After cleaning and combustion, it will not shake,,, and do not add high-grade fuel, which does not have the function of clean oil circuit, which can only cover up the problem of poor combustion, which will cause greater damage.

    Some petrol stations also have the ability to clean the tanks. As for why Europe and the United States add less additives, it is because the European and American fuel gas stations themselves have blended additives and then sell refined oil, after 2008, our country is to sell oil products without additives before 2008 is sold together, so now the fuel we use can also be called bare oil. That's a big difference.

    In addition, the world's famous cleaning agent additives companies are basically a hundred years old, basically in Europe and the United States, their additives are sold directly to the gas station, otherwise it would have been closed, this will be known.

  8. Anonymous users2024-01-31

    The reason for the unstable idle speed of the BYD S6 may be due to excessive dirt accumulation in the throttle and intake tract or due to fuel pressure failure. Excessive fouling of the throttle and intake: The excessive carbon and dirt in the throttle and the surrounding intake, and the change of the cross-sectional area of the air channel, make the control unit unable to accurately control the idle air intake, resulting in the mixture being too thick or too thin, and making the combustion abnormal.

    Common causes are: oil or carbon deposits on the throttle; There is oil and carbon deposits in the air intake tract around the throttle; Idle stepper motors, duty cycle solenoid valves, and rotary solenoid valves have oil stains and carbon deposits.

    Fuel pressure is too low, the atomization state of the fuel injected from the injector is poor or the fuel sprayed is linear, and only oil droplets are sprayed in serious cases, and the amount of fuel injected is reduced to make the mixture too thin; The oil pressure is too high, and the actual fuel injection volume increases, making the mixture too concentrated.

    Common causes are: clogged fuel filter; Fuel pump strainer clogged; The pump of the fuel pump is noisy and the old force is insufficient; The spring elasticity of the fuel pump safety valve is too small; deformation of the inlet pipe; The fuel pressure regulator is faulty; The oil return line is deflated and blocked.

    Millions of car purchase subsidies.

  9. Anonymous users2024-01-30

    Summary. Hello dear and happy to answer your <>

    BYD has an idle motor. The idle motor is an auxiliary equipment that can ensure the stable operation of the vehicle in the idle state, and improve the performance of the engine while reducing fuel consumption and emissions.

    Does BYD have an idle motor.

    Hello dear and happy to answer your <>

    BYD has an idle motor. The idle motor is an auxiliary equipment, which can ensure the stable operation of the car in the idle state, and reduce fuel consumption and emissions while improving the performance of the engine.

    Hello dear and happy to answer your <>

    Also known as an idle valve, an idle motor uses an electronic control unit (ECU) to control the amount of air entering the engine to keep the vehicle smooth at idle. This is because the engine speed is very low at idle and does not generate sufficient suction load, and the car often suffers from gas pollution. Idle motors solve these percolation problems and ensure that the engine is running optimally, improving fuel economy and performance.

    As far as I know, the BYD S6 model is equipped with an idle motor to optimize the idle performance of the engine.

    Are there idle motors, are they a thing?

    It's the same with kisses.

    Kiss is a device too.

    Where is it in the car?

    Kiss the engine compartment directly underneath.

    Intake valve**?

    Kiss the throttle above.

    Okay, teacher, can you show a**?

    There is no machine model on the teacher's side.

    Kiss you on the throttle and you'll find it.

    Teacher, which part of the circuit board is better?

    Kiss the board you can use with ASUS.

  10. Anonymous users2024-01-29

    Summary. Hello, I'm helping you sort out the answer to your question, please wait a while BYD S6 acceleration is not strong, the acceleration is very slow after running to 60 kilometers, and the speed can't go up, and the accelerator pedal is only less than 2,000 revolutions, what is the problem.

    Hello, I'm helping you sort out the answer to your question, please wait a while Hello, in this case, first consider whether the wheel is the fault caused by the slippage of the clutch plate? Also, check whether the oil filter element is too dirty and the oil supply is not smooth.

    Hello, I'm not more powerful than Yadi S6.

    Hello, first of all, check whether the clutch plate is slipping?

    It's all new, the hot car can't run up to 60, the empty oil acceleration is very stuffy, and what you said is normal.

    Then check the three-way catalysis, is there any blockage caused by the three-way catalysis?

    There is no faulty light, the ternary is not blocked, and the rear exhaust pipe is not blocked.

    Did the vehicle report a breakdown**? Have the relevant faults** been reported?

    Yes, I can't raise the speed, the hot car runs far away and runs up to 60, the bottom of the throttle, and I feel that the motivation is weak.

    Are there any glitches**? If there is a fault, Liang Zhaohu can upload the fault, analyze the problem, if you can't increase the speed, the main chain is to check the fuel pressure. Respectfully.

  11. Anonymous users2024-01-28

    Summary. Hello! The fuel consumption and fuel cost of the BYD S6 2012 model will vary depending on the specific driving situation and fuel price, and here can only provide a rough reference.

    Depending on the model and mileage, it is expected that the fuel consumption will be between 8-10 liters per 100 kilometers, and the corresponding fuel cost will also vary depending on the local oil price. Taking the average oil price in the city as an example, the price of No. 92 gasoline per liter is about yuan, so the fuel cost per 100 kilometers is roughly between 50-60 yuan. As for **, Wan is more reasonable for this car**.

    However, the specific condition of the vehicle, maintenance, etc. also need to be considered, it is recommended that you conduct a vehicle inspection and understand the vehicle history before buying a car to ensure the quality and reasonableness of the vehicle purchased.

    I want to buy this car, **10,000,**is it reasonable?

    BYD S6 2012 model, now mileage 127,000 kilometers, engine, has not been repaired.

    How much fuel consumption is there now? How much does it cost to fuel a kilometer?

    BYD S6 2012 model, now mileage 127,000 kilometers, engine, has not been repaired.

    I want to buy this car, **10,000,**is it reasonable?

    How much fuel consumption is there now? How much does it cost to fuel a kilometer?

    BYD S6 2012 model, now mileage 127,000 kilometers, engine, has not been repaired.

Related questions
4 answers2024-04-05

BYDS6 leakage pulled out the brake hornFusesIn this case, it is recommended that you go to the 4S shop to repair it! >>>More

7 answers2024-04-05

One: It's because you turned off the steering wheel and then flipped it. >>>More

7 answers2024-04-05

In fact, this is not absolute, in general: avoid engine idling for a long time, and avoid sudden braking as much as possible. Use the high and low gears reasonably and maintain the appropriate driving speed. >>>More

2 answers2024-04-05

1. The gear is clear, but there is no sense of inhalation. >>>More

8 answers2024-04-05

The engine does not catch fire and is one of the most common faults in cars. There are two situations when the ignition is not ignited: one is that the starter can be heard, but the engine cannot start. >>>More