What is the matter that the BYD S6 car can ignite, showing that the charging system is faulty, and t

One: It's because you turned off the steering wheel and then flipped it.

Cause the steering wheel to lock, insert the key at this time, and then pull the steering wheel and ignite, if it still doesn't work, try the opposite direction.

1. Explanation of steering wheel: a wheel-shaped device for controlling the direction of travel of automobiles, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.

2. The role of the steering wheel: the original car was controlled by the rudder. The violent vibrations generated by the car while driving are transmitted to the driver, making it more difficult for them to control the direction.

When the engine was relocated to the front of the car, the driver could no longer use the rudder to drive the car due to the increased weight. The result is a new design of the steering wheel, which introduces a gear system between the driver and the wheels that is flexible and insulates from the harsh vibrations of the road. Not only that, but a good steering wheel system also gives the driver a sense of intimacy with the road.

Two: The steering wheel is locked, it must be that you pulled out the car key and then turned the steering wheel, causing the steering wheel to lock, at this time, insert the key and unscrew it, turn the steering wheel, and the lock will be opened.

Hope, thank you.

What is the matter that the BYD S6 car can ignite, showing that the charging system is faulty, and the steering wheel cannot be moved? The car can be ignited, indicating that the vehicle's battery and other systems of the vehicle are working normally, showing that the charging system is faulty, there may be two problems, the first is that the generator system works abnormally, once the vehicle is started, it depends on the generator system to supply power, the generator system does not supply power to the vehicle, if the steering wheel is electronic power steering, there must be no power assist, that is, the phenomenon of not moving the direction, the second one, the vehicle body control system may be faulty, If the body control system module is damaged, it may be detected that the battery is not charged in the future, and if the battery is not charged, the electronic power steering may lose the steering power, in addition, the fault system will alarm and check the power generation voltage of the generator, or the module of the body control system, is there any damage?

Summary. Hello, there is a red light flashing on the dashboard of the vehicle, this is the anti-theft system fault indicator. First, in this case, first check the vehicle battery voltage, if the battery is seriously depleted, it will also lead to the vehicle anti-theft lock, then this situation is the need to charge the battery or take the power to start under normal circumstances, the service life of the battery is about 3 to 4 years, if the use period is exceeded, the battery appears to lose power, it is recommended to replace the new battery Second, the phenomenon caused by the loss of the vehicle remote control battery needs to be replaced with a new remote control battery, the choice of remote control battery, recommend the big brandThirdly, the vehicle anti-theft system is locked.

In this case, the anti-theft system is generally faulty**, or the anti-theft system program is lost, then this situation needs to be decoded with a computer, clear the fault code, and then use the computer to re-do the anti-theft match before it can start normally!

Hello, there is a red light flashing on the dashboard of the vehicle, which is a failure of the anti-theft system and a pure caution light. First, in this case, first check the vehicle battery voltage, if the battery is seriously lost, it will also lead to the vehicle anti-theft lock, then this situation is the need to charge the Songji battery or take the power to start under normal circumstances, the service life of the battery is about 3 to 4 years, if it exceeds the service life, the battery appears to lose power, it is recommended to replace the new battery Second, the phenomenon caused by the loss of the vehicle remote control battery needs to be replaced with a new remote control battery, the choice of the remote control battery, Recommended for big brands, durable third, vehicle anti-theft system locked. In this case, the anti-theft system is generally faulty**, or the anti-theft system program is lost, then this situation needs to be decoded with a computer, clear the fault code, and then use the computer to re-do the anti-theft match before it can start normally!

The remote control cannot unlock the lock.

Hello, this remote control can't unlock the lock, you can use the mechanical key inside the remote control to open the door, there is a mechanical keyhole next to the main driver's door handle.

I'm going to take the car now, not to ask you how to get in, I'm telling you about the situation on my side so that you can deal with it.

Then your wheel is likely to be the battery power loss, you don't open the door potato tung transport how to get in? The door does not open, the engine compartment cover does not open, and there is no way to start with electricity.

I've already used the method you said, and now I'm asking you how to remove that little red light.

Remove the little red dot, do you have a computer? There is no computer,I'm here to say two words is the hand wheel can not be lifted,This is the anti-theft lock Tong Wei,Bi Xiang needs to use a special computer to do anti-theft matching。

I'm here to provide you with an analysis of the relevant vehicle breakdowns. There is no way, on-site repair for you.

Summary. Hello, dear, BYD S6 can't catch fire when there is electricity because the dashboard wire or connector is short-circuited. The dashboard is damaged.

When repairing, you can first use a multimeter to detect the positive and negative voltage of the instrument and judge the specific fault: If the voltage is detected to be normal, the dashboard is damaged and needs to be replaced with a new one; If no voltage is detected, the wires or connectors of the instrument panel are short-circuited, and the cables and connectors need to be checked, re-wired, or replaced.

Still no response.

The battery is powered, the remote control key is powered, there is no response when the key is pressed to start, the alarm horn is sounding, and the meter is out of power.

Hello, dear, BYD S6 can't catch fire when there is electricity because the dashboard wire or connector is short-circuited. The dashboard is damaged. During maintenance, you can first use a multimeter to detect the positive and negative wax voltage of the instrument to judge the specific fault

If the test resistance is normal to the voltage, it means that the dashboard is damaged and needs to be replaced with a new one; If no voltage is detected, it means that the conductor or connector of the dashboard is short-circuited, and the cable and connector need to be checked, re-wired or replaced.

First of all, you can check whether the battery is "broken". In addition to the line fault, it may be the fault of the battery with a core open circuit, which mainly refers to the phenomenon that the internal connection of the battery is disconnected, so that the battery can not work effectively. The main manifestations are:

When charging, the charger is in a green light state, and when the vehicle is started, the instrument and the whole vehicle do not respond.

Short-circuit form Micro-open circuit: refers to the phenomenon of virtual connection in the internal connection of the battery in the process of driving, resulting in the failure of the vehicle to rent electricity and sometimes not respond, which is a battery quality problem. 0V Break:

It refers to the open circuit battery with the voltage at the measured end showing that it is not 2V or less, which is mostly caused by the current of Ochino and is not a quality problem.

Summary. Hello dear, I'm glad to answer for you, what is the reason why BYD S6 can't catch fire when it has electricity? , the battery has electricity.

The key fob has electricity. Dear, the reasons why BYD S6 can't catch fire when it has electricity are as follows:1

When the temperature is low, the viscosity speed of the car oil decreases by 2There was a problem with the ignition system, 3The car has less than 4 fuel

There is more carbon deposits inside the engine of the vehicle5Mercury damage to the fuel so that the fuel inside the fuel tank cannot be combusted**. <>

, the battery has electricity. The key fob has electricity.

Hello dear, very high Shuzhou Xing will answer for you, what is the reason why BYD S6 can't catch fire when there is electricity? , the battery has electricity. The key fob has electricity.

Dear, BYD S6 has electric beating and the reason why the shirt is on fire is as follows:1When the temperature is low, the viscosity speed of the car oil decreases by 2

There was a problem with the ignition system, 3The car has less than 4 fuelThere is 5 more carbon deposits inside the engine of the sail socks

Mercury damage to the fuel so that the fuel inside the fuel tank cannot be combusted**. <>

The remote key is a key that uses the wireless remote control function of the central lock, and can open and lock the door from a distance without inserting the key key into the lock hole. First generation: Conventional mechanical keys perform basic door opening and closing functions.

The second generation: you can press the remote control button to realize the opening and closing function of the door, but Linghui Roll car also needs a mechanical key to operate, and the two keys are used together, which is indispensable and somewhat cumbersome. Third generation:

The key and the remote control function of the two into one, open the door, close the door, the steam ruler and the car start are all completed by the active button, and the mechanical key is embedded in the remote control key, which has been prepared for emergencies. <>

It seems that the one-button start is not opened.

The gauge light is not on.

Kiss, check whether there is a problem with the smart key control module, and whether there is a problem with the line between the clutch tread crack town zhaoban switch brigade and the fuse box, if there is no problem with the line, the fuse box can be replaced.

BYD S6 The solution to the fire does not ignite: 1. Twist the key while shaking the steering wheel, and try to eliminate the fire quickly; 2. Adjust the correct gear, and then try to start the car; 3. Step on the clutch first and then ignite; 4. Replace the engine of the car; 5. Ask for help from surrounding car owners and apply for emergency measures such as taking electricity, borrowing fuel, and trailers.

There are many reasons why the BYD S6 can't catch fire with one button start:

1. The sensor in the car is difficult to sense due to the failure of the smart key;

2. The gear is not hung into the P gear;

3. The steering wheel is locked;

4. The battery voltage is insufficient, out of power or damaged;

5. The car cannot catch fire without oil;

6. Caused by engine starting system failure and other reasons.

BYD S6 one-button start can not catch fire may be caused by the following reasons:

1. The battery is out of power: you need to check whether the battery power of the car is enough, you can test the power by turning on the headlights of the car, if there is no electricity, it is recommended to replace the battery to solve the problem;

2. The key is out of power: For the vehicle with one key start, it may be that the key battery is insufficient or the car cannot retrieve the key, it is recommended to try after replacing the key battery;

3. Ignition failure: It may be the failure of the spark plug of the car, and it is recommended to replace and set a new spark plug to solve the problem;

4. Direction locking: It may be that the steering wheel is locked, it is recommended to return to the steering wheel and then ignite it;

5. No fuel: check whether the fuel tank has enough fuel, if not, you need to add gasoline in time; At the same time, it is also necessary to check whether there are external signal sources around the car that interfere with the start of the car, such as generators, pulse equipment and other machinery; If it still can't be solved, it is recommended that you contact 4S after-sales maintenance in time.

Photo by Q&A) @2019

The reasons why the BYD S6 battery cannot ignite: 1. The voltage of the battery is too low; 2. Battery failure; 3. Failure of oil supply system; 4. Ignition system failure; 5. The gear is wrong.

The car is generally divided into two parts: circuit failure and oil circuit failure. Personal suggestion: In addition to the lack of battery power, good insurance contact and check the air filter, it is better to find a professional maintenance personnel to deal with other problems.

1. Circuit failure.

1. Lack of battery powerLack of battery power is the most common cause of ignition, especially for cars that have been used for more than 2 years or have been parked for a long time. To judge the lack of power in the battery, you can use a multimeter to measure the voltage, generally the voltage is about 12V when the power is on, and the voltage is 10V when the ignition is ignited, which can eliminate the battery failure. If you don't have a multimeter, you can also observe whether the dashboard or lights are dimming when you are ignition.

The treatment method is also simple, charge the battery or change the battery.

2. Insurance contact is good, this is a method of 4S teaching. If the car is on fire, you can try to pat the fuse box with your hand or press the fuses in the fuse box one by one, if it can be ignited, it means that the insurance is caused by good contact.

3. If the starter is faulty, if the electric filial piety empty bottle has electricity, and the starter sound is not heard when pressing the start button to ignite (you can also open the hatch cover to see if the starter Qiaozi machine has turned), it may be a starter failure, and this can only be replaced by the starter in the repair shop. There is also a situation where the starter is rotating and the engine is turning, that is, there is a problem with the connection between the starter and the engine, and it can only be repaired. One trick is to look at the engine speed when the engine is igniting, if the engine shows revs (mine showed the engine at 200 rpm), but when the fire is on, you can rule out battery failure, good safety contact and starter failure.

4. Ignition system failureIgnition system failure includes ignition coil failure, spark plug failure and connection line failure. The S6 has two ignition coils, a spark plug. Comparison of several loss rates where the ignition coil or spark plug fails at the same time.

You can tighten the front and rear plugs of the live coil by hand to prevent the connector from loosening. The 4S inspection method is to pull out a pipe connected to the intake pipe (the net query is called the engine waste ** pipe), step on the accelerator while igniting, and spray combustible gas or liquid into the intake pipe from the pipe mouth (4S uses a combustible cleaning agent) to observe whether it can be ignited. It is advisable to leave this approach to professionals.

5. If the power supply of the gasoline pump fails, you can pull the plug of the gasoline pump, and measure the voltage or current of the plug when ignition.

Photo by Q&A) Model Y Model 3 Model X AION V Ideal One Xpeng P7 @2019