How to breed dragon spit beads, so that it can bloom a large amount, in fact, it is very maintained

Growth habits. To understand the winter maintenance of the dragon tuzhu, first of all, to understand its characteristics, the dragon tuzhu likes to grow in the sun, the air is humid environment, it can not withstand the invasion of cold. Therefore, in winter, it is necessary to ensure that the temperature is above 15 degrees, which can be conducive to its wintering.

In winter, the indoor temperature needs to be maintained at more than 10 degrees, and low temperatures are easy to make the dragon spit pearls frostbite, so you need to pay attention to the influence of temperature.

Maintenance method. Watering.

The first point of winter maintenance is moisture, because the temperature in winter is low, the plant needs less water, so we need to reduce the amount of water relative to usual, keep the soil dry and humid moderate, watering should be carried out from the bottom, when necessary, we also need to control the temperature of the water, avoid watering it with too cool water, and use water at a normal temperature is the most appropriate.

Illumination. Light is essential for any kind of plant, in winter, the dragon spit pearl needs a lot of light, so as to ensure the growth demand, for a long time can not get the light, the dragon spit pearl will appear leaf color dull phenomenon, resulting in its wintering is more difficult, therefore, in the daytime to put it in a sunny place to supplement the light. Sometimes the light is strong in the middle of the day in winter, so be careful not to sunburn the plants.

Fertilize. The dragon spit beads in winter do not need too much fertilization, the demand for fertilizer is not very large at this time, as long as you ensure proper moisture and sufficient light, make these preparations, and the dragon spit beads can survive the winter safely.

1. Light temperature: ensure more than 6 hours of light every day, and control the temperature between 18-24 degrees Celsius. 2. Pruning:

During the flowering period, the dense and yellow branches should be thinned, and the residual flowers should be cut off after flowering. 3. Fertilization: Phosphorus and potassium fertilizers should be applied before and after flowering, and the fertilizer must be decomposed.

4. Moisture: Keep the soil slightly moist.

1. Light and temperature environment

If you want to make the dragon spit pearl bloom more, you must provide it with suitable light, light is an important factor in the differentiation of flower buds, see the light for no less than 6 hours a day, and the temperature should be stabilized between 18-24 degrees Celsius, to speed up the growth rate of the dragon spit pearl.

2. Prune branches and leaves

Only the canopy of the dragon pearl tree to maintain good light transmission and ventilation, the plant talent blooms vigorously, so in the spring of each year, the over-dense, withered yellow branches and leaves should be cut off, and after the dragon pearl flowers wither, the residual flowers should be pruned to make the next year better flowering.

3. Apply fertilizer

In order to make Longtuzhu bloom vigorously, it is necessary to apply phosphorus and potassium fertilizers, such as soybean cake fertilizer, and apply well-rotted organic fertilizer during the opening of the pure flowering period, and control the concentration of Duanzhu fertilizer at about 20%, so that Longtuzhu can grow healthily and strongly.

4. Reasonable watering

When breeding dragon spit pearls, the soil can not be too dry, you need to water every 3-4 days, but the amount of watering should be controlled during the flowering period, so that the soil is slightly dry, so as not to soak the root system in the water, and the dragon spit pearls appear to fall flowers.

If you want the dragon to bloom more flowers, you can place it in a brightly lit sock for maintenance every day, and give it more than 6 hours of light. In addition, during the growth of dragon tuzhu, it is also necessary to prune off the branches that grow too long in time to promote the germination of side branches. When maintaining the dragon spit beads daily, it is also necessary to ensure that the nutrients are sufficient, and water them every 3 or 4 days, so that the dragon spit beads can bloom more flowers.

If you want to make the dragon spit pearl bloom more flowers, you first need to provide suitable light, the dragon spit bead is suitable for growing in a sunny environment, and the dragon spit bead can be placed in a bright place for maintenance every day, and give more than 6 hours of light to the core skin. In addition, the ambient temperature should be controlled between 18 and 24 during the growth period of the dragon spit bead to speed up the growth rate of the dragon spit bead.

In order for the dragon to bloom more, it is necessary to properly prune the dragon in the spring of each year. You can use sterilized sharp scissors to prune off the branches and leaves that grow too long and too densely on the dragon spit bead to reduce the consumption of nutrients, so that the canopy of the dragon spit bead can maintain good ventilation and light transmission, so that the dragon spit bead can bloom more flowers.

If you want the dragon to bloom more flowers, you also need to ensure that the nutrients are sufficient. During the growth period of Longtuzhu, it is necessary to apply phosphorus and potassium fertilizer, soybean cake fertilizer and other fertilizers. In addition, during the flowering period of Longtuzhu, it is also necessary to apply well-rotted organic fertilizer to supplement nutrients, and it is necessary to dilute the fertilizer with water before using it to avoid excessive fertilizer concentration and root burning.

If you want the dragon to bloom more flowers, you also need to ensure that there is enough water. During the growth period of Longtuzhu, it is necessary to ensure that the soil is in a moist and moist state, and it can be watered every 3 or 4 days. Note that during the flowering period, the amount of watering should be controlled, so that the soil is in a slightly dry state, so as to avoid the situation of falling flowers due to water accumulation in the roots.

If you want it to grow fast, you need to prune it frequently, otherwise it won't bloom. It blooms for a long time, and if you take care of it properly, it can even bloom all year round, and after its flowers are gone, you have to remove these residual flowers, and then you don't need to prune it anymore, and if you give it plenty of water and fertilizer, it can continue to grow flowers.

Water it enough during its growth time, keep the pot and soil wet, don't sprinkle too much water when the flower is open, and don't splash the water on the flower when watering. In the winter it will pause its growth and go into hibernation, at which point it is time to pause watering. Watering should be controlled, otherwise the branches of the fierce tree will grow very quickly, affecting the blooming of flowers.

Give it enough sunlight, if there is no sunlight, it will only grow branches, and the leaves will turn yellow and fall off. In the hot season, it should be shaded, and the sun should not be directly exposed to it. You can put it in a windy area of the house, and often sprinkle the surroundings and leaves with water to increase the humidity.

It needs to grow in an environment of 18-24 degrees, and if it exceeds 30 degrees, it will grow normally as long as there is enough water. If winter comes, it is necessary to prepare for an environment of no less than an octave, and if it is less than 5 degrees Celsius, it will freeze, and if it is mild, it will lose its leaves, and if it is severe, the stems will wither.

During its growth period, do not apply too much nitrogen fertilizer, and use phosphorus and potassium fertilizers as the main fertilizer, such as soybean cake fertilizer. When it blooms, organic fertilizer should be added every seven days, and it needs to be rotten, and the concentration only needs to be 20%, and you can also add a little ferrous sulfate to it.

In April, it is necessary to pluck the tops and remove the dead branches and yellow leaves, which can help the flower buds to grow and grow buds early, and wait until early May to bloom. Flowers generally wither in 25 days, it is necessary to remove it, and then fertilize it so that the next generation of flowers have a chance to open, and you can also buy a special nutrient solution and spray it on the branches to promote its flowering.

If you want to raise the dragon Tuzhu very well, you usually have to pluck it on time, give it enough light, prune the branches frequently, and fertilize reasonably, so that the growth of the dragon Tuzhu is very good, and more flowers can bloom in the later stage.

1. Top plucking on time

How to bloom more dragon spit beads, first of all, it is necessary to choose wax to do it at the appropriate time to give him topping and thinning buds, cut off some dead branches and leaves, generally in April every year when it is necessary to give it topping treatment, which is conducive to the growth of flower buds in the later stage, so that the flowers are more dense, generally in April topping dragon spit beads will bloom in May.

2. Sufficient light

Dragon Tuzhu is a very light-loving plant, so that it has enough light can promote its growth, so that it can bloom more flowers under full photosynthesis, but pay attention to avoid long-term sun exposure, in the summer can be properly shaded, so as not to burn the leaves of the dragon Tuzhu and affect its normal growth.

3. Prune frequently

The branches and leaves of the dragon spit pearl can grow relatively densely, if you want it to grow fast and good, you have to prune frequently, which is conducive to its branching, and can produce more flowers in the later stage, generally it is difficult to prune the plant that is not pruned, after pruning, you can properly water it, so that it has enough water.

4. Reasonable fertilization

Some people want to make the dragon spit pearl grow faster, bloom more flowers to give it a lot of nutrients, this practice is wrong, to reasonable fertilization in order to achieve the effect of promoting its growth, bloom more flowers, generally to the dragon spit pearl mainly apply phosphorus and potassium fertilizer, other round side balance nutrients to assist or do not add.

Dragon Tuzhu is also called unicorn Tuzhu, pearl treasure grass, pearl lotus, stinky peony vine, is a kind of unique ornamental flowers. The origin of dragon soil pearl is Mexico, West Africa, and now there are greenhouses in many places in China. Now it is mostly used as a potted ornamental plant, which has the effect of decorating the home environment and courtyard, and is deeply loved by flower lovers.

How to raise potted dragon spit pearl flowers?

1. The light must be sufficient. The dragon spit pearl will bloom when it grows well, so it must be full of light. Because the dragon tuzhu is particularly fond of light, as long as it is not in strong direct sunlight, it will not cause its leaves and flowers to sunburn.

If you keep the dragon pearl in a dark place for a long time, the whole plant will not grow well, wilt or the leaves will turn yellow.

2. Proper pruning. If you want the dragon to grow fast and grow well, you must prune it regularly and properly, which is more conducive to flowering. Pruning the plant before flowering can promote the differentiation of flower buds, and cut off the wilted flowers after flowering, so as to reduce the waste of nutrients.

After pruning, you can give enough water and nutrients, and it will continue to produce buds.

3. Proper topping. Proper topping is the key factor to keep Longtuzhu flowering more and early flowering, and the yellow leaves should also be removed when topping, and the nutrients should be concentrated on healthy plants. This allows the flower buds to continue to differentiate and grow buds early.

4. Watering points. When watering the dragon spit beads, you can't water too much at one time, and you should decide according to the wetness of the potting soil, otherwise there will be water and rotten roots. Of course, long-term water shortage will also cause slow growth and leaf wilting.

When the air humidity is low in summer, the leaf water can be sprayed appropriately to increase the air humidity and clean the dust of the leaves.

5. Fertilization method. In addition to giving basal fertilizer, potted dragon spit beads should also be properly topdressed, but do not use too much nitrogen fertilizer, mainly phosphorus and potassium fertilizer. Don't be too thick when fertilizing, try to fertilize frequently and thinly, so as to facilitate the growth of potted dragon spit beads.

To sum up, the maintenance of dragon spit beads is not difficult, and the flowers are also very beautiful, but it is not recommended to put them in the bedroom to breed.

1. Light. The dragon spits pearls and rejoices in the light. To maintain it, it is necessary to provide adequate light to ensure its normal growth and development. However, in summer, the temperature is high and the light is strong, so you need to place it in a cool place and not be exposed to direct sunlight.

2. Soil. It prefers soft, breathable, neutral and slightly acidic soils. It can be planted in sandy soil rich in organic matter and easy to drain, and appropriate bone and plum flour or cake residue can be added as base fertilizer.

3. Temperature. The optimum temperature for its growth is 18-24. The temperature of winter growth should not be lower than 8, otherwise it may cause the plant to lose its leaves.

Its growing season temperature can be above 30, and as long as the water supply is sufficient, it can still grow normally. The temperature needs to be around 17 during the flowering period.

4. Moisture. It prefers a warm, moist environment and keeps the soil moist during the growing season. However, watering should not be too much, too much water will cause only vines to grow without flowering, and even cause leaves to wither and roots to rot and die.

It should be watered well and given proper shade during the summer high temperature season. In winter, reduce watering to ensure that it winters safely.

5. Fertilization. Fertilizer should not be applied too much, and thin fertilizer should be applied frequently. In spring and autumn, fertilization is applied once every half month, and cooked cake fertilizer water and potassium dihydrogen phosphate solution can be applied alternately. It is better not to fertilize in summer and winter.

Potting potted dragon spit beads, generally every 1 2 years to change the pot, the pot time in early spring or after the flowers. When changing pots, first use broken tiles to pad the drainage holes, then put a small amount of bone meal as base fertilizer, and then load new culture soil (4 parts of humus, 4 parts of garden soil, 2 parts of sandy soil), plant the plants, and leave 2 3 cm along the mouth for fertilization and watering. After changing the pot, water thoroughly, put the seedlings in the shade, and move the seedlings to a sunny place for maintenance.

Water and fertilizer management Watering: Longtuzhu is more sensitive to the response of water. During the growth period of stems and leaves, the saline soil should be kept moist, but the watering should not be excessive, and the amount of water is too large, resulting in only vines and no flowers, and even the leaves are yellow, withered, and the roots rot and die.

In the summer high temperature season, it should be fully watered and properly shaded. In winter, watering should be reduced and made dormant in order to survive the winter safely.

Fertilization: Fertilization should not be too much, apply 1 time of rotten thin cake fertilizer water every 7 10 days during the flowering season, and apply fertilizer 3 or 4 times in a row. If there is yellowing phenomenon in the cultivation process, it can be combined with top dressing, and the application of ferrous sulfate can make the leaves gradually turn from yellow to green.

Temperature and light Temperature: It should not be placed in the dark for too long, and the flowers will fall if the temperature is above 21 and more than 24 hours.

Light: Longtuzhu needs sufficient light in winter, and shade when the weather is too hot in summer, otherwise the leaves will turn yellow. When there is not enough light, it will cause vine growth and no flowering. Flower bud differentiation was not affected by photoperiod, but stronger light beams promoted flower bud differentiation and development.

Reproduction method Longtuzhu can be propagated by sowing and cuttings.

Plastic pruning Household dragon spit oak beads generally grow shorter, but in fact, its branches can grow very long, pay attention to plastic pruning, you can cultivate a very beautiful dragon spit beads. It can either be allowed to grow branches or pruned into a beautiful dwarf plant.

During the growth and development period, pay attention to topping, control the height of the ramet, make the plant neat and tidy, and maintain a beautiful appearance.

Common pests and diseases Common diseases of Longtuzhu: leaf spot, rust, mosaic disease, gray mold.

Common insect pests: leaf beetles, stinging moths, scale insects, whiteflies.