What is a splicerless board? What is an interposer?

The finger joint board is spliced by a plurality of wooden boards, and the upper and lower boards are no longer glued to the splint, because the vertical planks use a zigzag interface, similar to the cross docking of the fingers of the two hands, so it is called the finger joint board. The finger joint plate is divided into two types: knotted and knotless, the knotted scar, and the knotless scar, which is more beautiful. It is generally used in furniture making.

The unbound version is a board that does not need to be connected, glued on or stuck with wood, and this kind of board is the unbounded version that requires a technology.

This kind of jointless board means that everyone can't see the interface, but in fact there is an interface.

What is a seamless plate, that is, there is no seam example as a whole.

No joint board is a floor without joints, and such a board is a whole piece without joint, such a floor will be safer and stronger, so there are many people who like to buy knotless boards, so that they can make the products they buy stronger.

It can be understood as an independent column. A free-standing column is a column that does not have anything around it that touches it (wall), just a column standing there, and an independent column is a column that is independent of the load and compression without being attached to the wall or other components. There are separate foundations and concrete pads, with separate columns going up to the top of the building.

Generally, there are high-rise and small high-rise frame structures and frame shear structures. The structure is relatively safe. It is commonly found in basement garage structures.

The relationship between independent columns and structural columns: independent columns are columns that are stressed in the frame, and structural columns are only small columns that play a role in increasing the seismic resistance of the wall, and they are columns that do not need to bear the load of the building.

What is a knotless board, that is, a seamless board, is called a seamless board.

I don't understand what this jointless plate means? What is its part of speech? You have to talk about the content well, so that we can understand what it means.

It's not Wu Jie, you should check some information on the Internet or something, take a look at the book, and find out our dynamics.

The power adapter device comprises at least two connecting guides, one end of one of the connecting guides is connected with the specific two jacks of the signal device, and the other end is connected with the specific four conductive pieces of the signal device, and the adjacent two conductive pieces that are respectively located in the two jacks in the four conductive pieces are connected with the grounding circuit of the main substrate, and when the adapter plate carries high current, it has both grounding effect, and the side that carries low current also plays a grounding role simultaneously, so that the adapter board not only has a good transfer effect, but also has a more ideal protection effect for noise interference. There are many types of interposers.

It's the PCB adapter board. In the production of computer motherboards, the PCI function needs to be tested, so a PCI card must be inserted into the PCI slot of the motherboard. During the long-term plugging and unplugging process, there will be wear and tear on the PCI device cards that are frequently inserted.

This is where the PCI PCB riser comes into play.

Application of PCB interposer.

For example, when the computer motherboard is produced, the PCI function needs to be tested, so a PCI card must be inserted into the PCI slot of the motherboard. During the long-term plugging and unplugging process, there will be wear and tear on the PCI device cards that are frequently inserted.

This is where the PCI PCB riser comes into play.

The adapter board is generally used for debugging, maintenance, for introducing or drawing out signals to facilitate the connection of test instruments or providing signal sources, the adapter board generally only has connectors and printed wires, and individual ones also have simple circuits, and this adapter board is generally not a plug-in board necessary for the normal operation of the control cabinet.

Another type of interposer provides signal merging or splitting.

The same width, thickness, and length of the same or different length of the wooden strips, the two ends of the length direction are respectively serrated by special woodworking equipment, the sawtooth of the two adjacent wooden strip ends are coated with white latex, after pressurization, pressure relief, maintenance and other processes, insert and mesh with each other, and the large area and flat plank formed by the piece is called tooth joint. Because the serrated interface is similar to finger crossing, it is also called a finger joint plate.

The toothed board is a solid wood non-deforming board, with a broad application prospect, with the gradual lack of forestry resources, the toothed solid wood board will be more scarce.

The landlord added a question.

I'll tell you clearly, it's a solid wood board, that is, a small piece of solid wood board spliced together with white latex, think about it, how big is it, so big, so big a tree...

The tooth joint board is a solid wood board, generally the site is used to make furniture is this board (fir tooth joint board is more), if there are children, use the snow treasure paint-free board to make a wardrobe so environmentally friendly, snow treasure has a special board for children, in fact, the so-called paint-free board is the middle of the two-sided veneer is the fir board, has done a good job of lacquer, woodworking site on the line, no need to paint, the side with the corresponding color of the mouth close, because the paint part is omitted, so it is more environmentally friendly.

It's called a clipboard, and you can buy it at computer stores.

You're talking about a handwriting board, which works very well. It's available everywhere you sell computer accessories.

A handwriting drawing input device is an input device for a computer, most commonly a writing tablet (also called a writing machine), which functions similarly to a keyboard.

Hanwang pen, you can go to Jingdong or Tmall to check it, it should be what you are looking for.

Solid wood plug-in board refers to solid wood board, because plug-in board belongs to the category of solid wood board.

Plug-in boards are also known as finger-jointed boards, which are an emerging wood material in the modern wood industry.

The finger joint board is no longer glued to the splint but is spliced together by multiple wooden boards, because the vertical wooden board adopts a zigzag interface, similar to the cross docking of the fingers of two hands, so it is called the finger joint board.

The finger joint board is also divided into two kinds of knots and no knots, there are knots in the existence of scars, there are no knots in the scars, more beautiful, the finger joints can be used directly to make furniture, the surface does not need to be pasted with decorative panels, and there is a style and silver saving.

Solid wood plug boards are bonded together with strips of planks. In addition to being cheap, the biggest advantage of solid wood flooring is that it will not crack and deform, if it is decorated, you can choose a solid wood plug-in board according to the actual situation of decoration. After all, the decoration and living are all done by a person, and you can choose your own preferences in the case of professionalism.

Solid wood plug-in board with solid wood, TV cabinet can choose plug-in board or plywood or particleboard, basically solid wood floor manufacturers are doing this, because the general solid wood plug-in board is not so wide, solid wood plug-in board environmental protection must not be a problem, solid wood floor is the most environmentally friendly furniture among all furniture.

Because the glue used for solid wood plug-in board is relatively small, the formaldehyde emission of solid wood floor can be lower than the industry standard, only row so environmentally friendly, solid wood floor environmental protection standards, and now the glue used for panel furniture is also less Now it has reached the industry standard, that is, it is durable and not strong than solid wood.

The solid wood plug-in board should consider the force problem, and the structure of some furniture should be reasonable, and it will not be deformed if the force is uniform. In addition, the parts of the solid wood floor without panel finish should be painted with transparent varnish, which can prevent cracks and make the surface of the solid wood floor smooth, beautiful and durable.

Hardwood floor varnish evaporates quickly and does not have odors. In addition, the paint of the oil mixing process is directly done on the solid wood plug board, which is prone to problems, and it is advisable to finish the solid wood floor. What is the superiority of solid wood plug-in board?

First of all, it is relatively environmentally friendly. Why? Solid wood plug-in boards have small gaps and are rarely used for chemical products.

Secondly, durability, this one is obvious. Third, it is beautiful.

The material is solid wood, and if the board is not long enough, the connection between the board and the board is plugged, which is the gear-shaped kind.

It means that there is no keyboard when entering information, and the corresponding connector must be connected with a wire to enter information.

Before the invention of the keyboard, computers had to be wired to enter information. Time-consuming and labor-intensive.

Finger joint board and woodworking board use the same purpose but the finger joint board in the production process with much less glue than woodworking board, so it is more environmentally friendly than woodworking board, at present, more and more people have begun to choose finger joint board to replace woodworking board. The common thickness of finger joint board is 12mm, 14mm, 16mm, and the thickest can reach 36mm.

There is no need to paste the splint up and down the finger joint board, and the amount of glue used is greatly reduced. The glue used for finger jointing board is generally milky white glue, that is, the aqueous solution of polyvinyl acetate, which is made of water as a flux, which is non-toxic and tasteless, and even if it is decomposed, it is acetic acid and non-toxic.

Finger joint board is also divided into two kinds of knots and no knots, there is a scar eye in the knot, there is no scar eye in the knot, more beautiful, some friends directly use the finger joint board to make furniture, the surface does not need to be pasted with the panel, and there is a style and save silver.

The simple way to identify the quality of the finger joint board is to look at the core material growth rings: the finger joint board is mostly fir wood, the growth rings are more obvious, the larger the growth rings, the longer the age of the tree, the better the material.

The finger joint plate is divided into open teeth and dark teeth, and the dark teeth are the best, because the open teeth are more prone to unevenness after painting, and of course, the processing of dark teeth is more difficult. The harder the wood, the better, because it is much less deformed and the pattern is more beautiful.

The difference between finger joint board and woodworking board: finger joint board belongs to solid wood, and woodworking board is a wood-based board.

Finger jointed board uses much less glue than woodworking board in the production process, so it is a more environmentally friendly board than ordinary woodworking board.

Blockboard and woodworking board are different from one word, thin blockboard is higher than woodworking board, and the structure is the same as that of woodworking board.

The inner core is better than ordinary woodworking boards. Delicate texture.