What s wrong with my computer s configuration?

You may need to change the power supply.

Troubleshoot software issues first.

For example. There is a high possibility that the graphics card driver and software are not compatible.

The hardware is that the power supply and the motherboard are not compatible, and these two may be relatively large.

Your computer is an assembly machine, right?

If you are not a computer master, I advise you to buy a brand machine, brand machine insurance, after-sales service and the like!

Huntkey Calm King Diamond Edition.

It is a 300w power supply.

The 9800GT is a large power consumer.

Please go to the computer city to replace a 350W power supply.

If it doesn't work yet.

Reinstall the system!

Network Neighbor right-click attribute Local connection right-click attribute Internet Protocol Use the IP address below.

Subnet Mask Default gateway DNS Modify according to your location DNS mainly controls the availability of Internet access.

Inquire. After the modification is completed, click OK and right-click the local connection to repair.

Finish Try until the game still doesn't get stuck.

Needless to say, your problem is 100 is an IP setting problem, you don't set the IP, when the computer starts, it will automatically search for the IP address, then you will be delayed for 1 minute, you can search for the IP, and then start the nod is not slow

Try it from the system that has not been installed, and then install an XP system to see if the graphics card driver is to be installed.

Method 1: If you have been waiting for a few hours and are still stuck on this page, you can do the following:

1. You can directly power off and shut down, and then restart;

2. When restarting, press F8 on the keyboard continuously;

3. After waiting for the computer to enter the mode interface, use the up and down keys of the keyboard to select the latest correct configuration;

4. Then press the Enter key to try to enter the system desktop normally.

Method 2: This situation may be a failure when Windows updates the patch, and the solution is:

1. First, enter the safe mode, uninstall the upgrade or patch just now, and cancel the automatic upgrade program;

2. Then click on the desktop to enter "Computer", then click "Right-click" and select "Properties";

3. There will be a "windowsupdate" in the lower left corner of the properties interface, click on it;

4. Click "Change Settings" in the left column and select "Never check for updates".

Hello, method 1: If you need to wait for a while more in this situation, if you have been waiting for a few hours, you are still stuck on this page, you can operate according to the following methods: 1. You can directly turn off the power and shut down, and then restart; 2. When restarting, press F8 on the keyboard continuously; 3. After waiting for the computer to enter the mode interface, use the up and down keys of the keyboard to select the latest correct configuration; 4. Then press the Enter key to try to enter the system desktop normally.

Method 2: This situation may be a failure when Windows updates the patch, the solution is: 1. First enter the safe mode, uninstall the upgrade or patch just now, and cancel the automatic upgrade program; 2. Then click on the desktop to enter "Computer", then click "Right-click" and select "Properties"; 3. There will be a "windowsupdate" in the lower left corner of the properties interface, click on it; 4. Click "Change Settings" in the left column and select "Never check for updates".

I hope mine can help you and have a great day!

Summary. Hello, I'm glad to answer for you, method 1: If you need to wait for a while longer in this situation, if you have been waiting for a few hours, you can still get stuck on this page, you can do it as follows:

1. You can directly power off and shut down, and then restart; 2. When restarting, press F8 on the keyboard continuously; 3. After waiting for the computer to enter the mode interface, use the up and down keys of the keyboard to select the latest correct configuration; 4. Then press the Enter key to try to enter the system desktop normally. Method 2: This situation may be a failure when Windows updates the patch, and the solution is:

1. First, enter the safe mode, uninstall the upgrade or patch just now, and cancel the automatic upgrade program; 2. Then click on the desktop to enter "Computer", then click "Right-click" and select "Properties"; 3. There will be a "windowsupdate" in the lower left corner of the properties interface, click on it; 4. Click "Change Settings" in the left column and select "Never check for updates".

What to do if the computer is constantly in configuration.

Hello, I'm glad to answer for you, method 1: If you need to wait for a while in this situation, if you have been waiting for a few hours, you are still stuck on this page, you can operate according to the following methods: 1. You can directly turn off the power and shut down, and then restart; 2. When restarting, press F8 on the keyboard continuously; 3. After waiting for the computer to enter the mode interface, use the up and down keys of the keyboard to select the latest correct configuration; 4. Then press the Enter key to try to enter the system desktop normally.

Method 2: This situation may be a failure when Windows updates the patch, the solution is: 1. First enter the safe mode, uninstall the upgrade or patch just now, and cancel the automatic upgrade program; 2. Then click on the desktop to enter "Computer", then click "Right-click" and select "Properties"; 3. There will be a "windowsupdate" in the lower left corner of the properties interface, click on it; 4. Click "Change Settings" in the left column and select "Never check for updates".

I used method one, but he still went back to the configuration and couldn't turn on the computer.

Try the second method

It's the same when you enter safe mode, you can't turn on the computer.

Hello dear, the solution to the update is as follows: 1. Restart the system, press "F8", and enter the safe mode. 2. Select the safe mode to enter the system, and you need to wait for a few minutes.

3. Right-click "Computer" and click "Service" from the pop-up environment menu to launch the service window. 4. After launching the "Service" window, look for the "Windows Update" item from the list window on the right, and after finding it, check its "Startup Type", which is "Automatic" at this time. 5. Right-click the item, click "Properties" from the pop-up environment menu, pop up the "Windows Update Properties (Local Computer)" window, modify the startup type, adjust it to "Disable", and click OK.