Is the paper on the copper foil of the epoxy floor going to tear?

The epoxy floor paint has been brushed to the top of the baseboard and has been fully cured. What can be washed off with?

According to our engineering experience, fully cured epoxy floor paint cannot be washed off with thinners, and chemicals such as strong acids and alkalis cannot be washed off.

It needs to be torn off, otherwise how can it conduct electricity. Epoxy anti-static floor construction technology:

1. Ground treatment: polishing, repairing, decontamination and dust removal should be done according to the ground conditions.

2. Epoxy anti-static floor primer: Roller coating of anti-static primer with strong permeability and adhesion is used to enhance surface adhesion.

3. Copper foil laying: use conductive copper foil to lay a comprehensive one.

4. Anti-static mortar: add anti-static components to quartz sand and evenly coat them with trowels.

5. Anti-static putty: add an appropriate amount of putty powder with anti-static components, and evenly coat it with a trowel.

6. Anti-static topcoat: roller coating with anti-static topcoat or anti-static self-leveling steamed bun.

When should the epoxy floor striping and color separation paper be torn off? Alibaba Business Circle.

In large-area epoxy floor engineering, it often involves the division of the ground, that is, the need to mark the ground. Epoxy floor marking methods include:

It is best to remove the demarcation line as soon as possible after the demarcation line is applied to ensure that the flooring material that is the demarcation line can be removed before it dries.

With copper foil, your construction workers will definitely know how to do it, and if they can't, they can only tell you: you have found the wrong person. If you are a builder, your leader will definitely be, and if he can't, tell you: you have also found the wrong person, and you may not even get paid!

Causes of peeling of epoxy floor paint:

1. Poor quality of epoxy resin material will lead to undurable ground, peeling, delamination, discoloration, cracking, etc.;

2. Failure to construct in strict accordance with standards and cutting corners will lead to undurable ground, peeling, delamination, cracking, etc.;

3. The ground is not made of moisture-proof layer, which will lead to epoxy floor bubbling and delamination;

4. If the ground is not cleaned, it will lead to delamination and peeling of the epoxy floor;

5. If the amount of epoxy material is too small, it will lead to the ground being exposed;

6. If the ground shrinkage joints are not repaired, it will lead to ground cracks;

7. Epoxy flooring will cause fading under the irradiation of the sun;

8. Construction in bad weather or environment will also lead to quality problems.

The 1:1 material is primed with a hardener and is transparent. 1:1 epoxy floor paint, actually epoxy polyurethane. The taste is relatively strong. In addition, because it needs to be covered with an extra layer than epoxy resin floor paint, it is now slowly no longer needed.

The primer has two functions, one is the sealing effect, the other is to connect the ground and the floor paint to better cooperate, generally there is no color of the transparent liquid, the top coat is generally made of more colorful, and the surface effect can be made in various styles.

Epoxy resin floor paint primer main uses:

1. Sealing and barrier function: the main functions of the sealing effect are reflected in: anti-pan alkalinization, anti-salting-out property, balanced and uniform water absorption of the foundation ground, and ensuring the uniformity of color and gloss of color paint or varnish after construction.

2. Enhance and strengthen the foundation ground: For the loose foundation ground and the old ground, after the grinding and vacing treatment, the primer is painted, and the epoxy resin primer has good penetration into concrete and terrazzo, etc., reinforcing the base layer and providing the adhesion of epoxy resin floor paint, so as to ensure the service life.

3. Improve the adhesion of the topcoat: balance the absorption degree of the base paint, so as to ensure the uniformity of the gloss and color of the topcoat, improve the decorative effect of the topcoat and prolong the service life of the topcoat.

Epoxy resin floor coating bottom, middle and top coat are indispensable in the project, each has its own duties, plays different roles and functions, so that the performance of the entire epoxy floor engineering can be brought into full play, whether it is from the performance, or aesthetics, economic aspects can meet the needs of customers.

Laying conductive copper foil is an important part of the construction of epoxy anti-static flooring, and it is the guarantee that anti-static flooring can quickly conduct static electricity. In the construction process of epoxy anti-static flooring, what are the key points to pay attention to in the laying of conductive copper foil?

1. Laying interval: 2m 2m

Anti-static floor conductive copper foil laying is carried out after the completion of the floor paint primer roller coating, which is usually laid vertically and horizontally in the shape of a "well", and the conventional interval is 2m 2m, that is, the interval between each copper foil is 2m in the transverse direction, and the interval between the longitudinal copper foil is also 2m.

2. A small section of copper foil grounding wire must be exposed at the corner.

When laying copper foil, a small section should be reserved at the corner to connect the ground wire to ensure the anti-static performance of the epoxy anti-static floor.

The laying of anti-static epoxy floor copper foil is generally 2*2 or 4*4, which depends on the conductivity of the material, and the premise is to meet the use standards! Quality assurance comes first.

If you buy it, you don't need to stick it, the manufacturer is to temporarily protect the car.

It needs to be torn off.

Protective paper is a temporary protective film used by manufacturers to protect cars. It is recommended that you find someone to apply a professional protective film.

Here's how to easily tear it off:

1. Find some napkins and use a hair dryer to blow and rub them down.

2. Asphalt detergent or a bottle of wind oil essence if it is cheaper.

3. Use a little force on a rag with water.

4. Boiling water and a rag are done.

Tin foil itself is made of aluminum, which is a medium specially used to grill food in the oven, and there is no substitute to replace this kind of thing that is both heat transfer and not afraid of melting.

You don't need to tear it, you can break it! Of course, it's okay to tear it.