What about fireproof flooring? Are epoxy floors fireproof?

Fireproof flooring refers to a decorative material that is laid on a factory or a large area of floor surface that does not support combustion or is composed of flame-retardant materials.

Compared with the general paint, the fireproof floor paint is basically the same in terms of physical properties, the difference is that after it dries, the paint film itself is not easy to burn, and when it encounters fire, it can delay the flame to burn to the painted combustibles, and has certain fire resistance.

It belongs to A1 level fireproof flooring, which has the characteristics of safety and non-toxic, halogen-free, low smoke, environmental protection, etc., and also has many advantages: high efficiency and flame retardant; Halogen-free; It has a better smoke suppression effect. There are no harmful substances emitted during production, use and disposal, and the acidic and corrosive gases generated during combustion are neutralized.

It is suitable for use in repair workshops and industrial plants that bear heavy loads and are prone to sparks.

Absolute fire protection is required during the painting process (thinner is flammable), but after the floor paint is dry, cigarette butts will not burn the floor. Wuhan Fei Vashi's new A1 grade fireproof epoxy resin wear-resistant floor paint allows you to worry about this aspect.

It's good to reduce safety hazards.

Medile inorganic flooring, Class A fireproof!

Ordinary oily epoxy flooring.

In order to solve this problem, NORMAC has developed the NORMAC 400 series of A1 fireproof paint. Normac 400 uses water as the dispersion medium, and does not empty toluene and xylene.

Such volatile organic solvents will not cause environmental pollution, there is no hidden danger of fire, and can meet the requirements of A1 fire protection to meet the current requirements of environmental protection and fire protection, of course, a small amount of propylene glycol methyl ether can also be added.

and other non-air polluting alcohol ether solvents to improve the film formation of water-based epoxy coatings.

Normac 400 can be applied and cured in a humid environment with a reasonable curing time to ensure a high cross-linking density of the coating film.

Normac 400 has good adhesion to most substrates, even wet substrate surfaces.

Normac 400 has good operation performance, the construction tools can be directly cleaned with water, can be reused, and the preparation and construction operation of the paint bucket are safe and convenient.

The cured coating film of Normac 400 has a soft luster, good texture, good anti-corrosion performance and unidirectional air permeability.

Wuhan Normanke focuses on R&D, production and construction of various types of industrial floor coatings, nationwide contracted labor and material door-to-door service, providing a two-year warranty.

So far, it has provided services for more than 1,000 enterprises, and it can be searched if needed.

The quality of the A-grade fireproof floor of the Finnas is very good, its combustion performance meets the requirements of A1 F1 grade, according to GB86 24-2006 judgment, the combustion performance of its products reaches A1F1 grade, and its ** is relatively cheap A-grade floor paint, which is freely chosen by customers, and many people choose this brand.

Which brand of Class A fireproof flooring is good? Personally, I think that many of them are better than this kind of fireproof flooring, and I personally think that many big brands are more secure.

It is widely used in industrial plants, warehouses, large businesses, shopping centers, underground parking lots and other places with fire protection requirements.

Meet the requirements of Class A fire prevention to eliminate fire hazards.

1.It has extremely high adhesion to all kinds of substrates, small shrinkage and high hardness.

2.With water as the dispersed medium, it is non-toxic and non-polluting, and it is very safe to store, transport and construct.

3.It is especially suitable for construction in the basement or on the ground on the first floor, which can play a role in moisture-proofing, avoid hollowing out the shell, and prolong the service life of the floor.

The construction of the fireproof floor is convenient and the construction period is short.

The A-class fireproof floor of Fei Vashi has flame retardancy and non-flammability, so that the protected substrate does not directly contact with the space, it also has flame retardancy and non-combustibility, it also has a low thermal conductivity, and the transmission of flame Shichun oak to the protected substrate can be delayed.

Suddenly. Is my transition faster than 5G? I found that Pai Wu is thinking about the liquid now a lot of people are already on the mobile phone ah is already a spiritual immigrant dust or you see a lot of people on wechat his address she thinks. Write domestic.

The floor belongs to the building materials product, so it is divided according to the fire rating standard of building materials.

The combustion performance level of high-rise building decoration materials should be divided into four levels: Class A, non-combustible; Class B1, flame retardant; Class B2, flammable; Class B3, flammable.

Specific: Class A: Non-flammable:

Granite, marble, terrazzo, cement products, concrete products, gypsum board, lime products, clay products, glass, ceramic tiles, mosaics, steel, aluminum, copper alloys, etc.

Class B1, flame retardant;

1.Gypsum board, fiber gypsum board, cement particleboard, mineral wool board, glass wool board, perlite board, flame retardant plywood, flame retardant MDF board, fireproof plastic decorative board, flame retardant double-sided particleboard, colorful coatings, flame retardant wallpaper, flame retardant wall covering, flame retardant imitation granite decorative board, magnesium oxychloride cement prefabricated wall panel, flame retardant FRP plate, PVC plastic wall panel, flame retardant molded wood composite board, color flame retardant wood-based panel, flame retardant FRP, etc.

2.Hard PVC plastic flooring, cement particleboard, cement wood wool board, neoprene flooring and other flame retardant treatment of all kinds of flame retardant fabrics, etc.

3.PVC plastic, phenolic plastic, polycarbonate plastic, PTFE plastic. Melamine, urea-formaldehyde plastics, silicone resin plastic decorative profiles, various fabrics with flame retardant treatment, etc.

Class B2, flammable;

All kinds of natural wood, wooden wood-based panels, bamboo, paper decorative panels, decorative thin wood veneer, printed wood grain wood-based panels, plastic veneer decorative panels, polyester decorative panels, composite decorative panels, plastic fiber boards, plywood, plastic wallpaper, non-woven wall coverings, wall coverings, composite wallpapers, natural material wallpapers, artificial leather, etc.

Class B3, flammable.

Semi-rigid PVC plastic flooring, PVC membrane flooring, wood flooring, chlorine carpet and other pure wool upholstery fabrics, pure linen upholstery fabrics, other fabrics with flame retardant treatment, etc.

Flame retardant treated polyethylene, polypropylene, polyurethane, polystyrene, glass fiber reinforced plastic, chemical fiber fabrics, wood products, etc.

Merdile inorganic floor coating, yes, Class A fireproof, super wear-resistant, zero pollution!

Epoxy and PVC are definitely not good, common sealing curing agents, cement self-leveling can be achieved, and high wear-resistant silent anti-slip topcoat can also reach Class A fireproof.

When it comes to choosing a Class A fireproof floor paint for an industrial plant, here are some well-known brands that are widely recognized and used:

SIKA: SIKA is a globally renowned construction chemicals company offering a wide range of high-performance floor coatings and solutions, and its fire-resistant floor coating products have a good reputation in the market.

Leobo: Leobo is a leading manufacturer of coatings for a wide range of industrial floor coatings, including fire-resistant floor paints, and its products are widely recognized for their quality and performance.

PPG Industries (PPG Industries) :p PG Industries is a leading global manufacturer of coatings and specialty materials with flooring coating products with good fire resistance and fire performance in industrial applications.

rpm international inc.(rpm International): rpm International is a manufacturer of coatings, sealants and preservatives, and has several brands, such as rust-oleum, etc., and its fireproof floor coatings have a certain influence in the market.

Hempel: Hempel is a leading global manufacturer of coatings and protective products** for industrial applications, including fire-resistant floor coatings.

Each of these brands has a range of fireproof floor coating products to choose from, and which brand to choose should be evaluated and compared based on factors such as engineering requirements, project burial needs, budget and construction conditions. In addition, it is advisable to consult a professional or paint dealer for more accurate advice and guidance before choosing.

The earliest floor paint appeared in Germany in 1934, the floor paint is more beautiful in appearance, strong corrosion resistance in use, waterproof and closed world effect is also very good, and dust and wear-resistant. Moreover, it is also divided into decorative, heavy-duty and decorative floor paints.

Considering that there are still many people who don't know much about floor paint, so they don't know how to choose a better floor paint, so now Hangzhou epoxy resin floor will tell you how to choose floor paint.

First of all, you need to consider what performance requirements you need for the floor paint you choose and where the floor is located, some places will have higher safety requirements, such as the floor of the canteen or the ground with a little slope, in this case you need to use the kind of non-slip and moisture-proof floor. There are also places where the requirements for acidity and alkalinity will be relatively high, for example, where chemical experiments are often done, chemical corrosion-resistant flooring should be used in this kind of place. If the floor is used in a place where a large number of vehicles pass by, then the floor to be used here needs to bear a large load of Zen.

Therefore, after considering these factors, you should find out from the seller what kind of floor paint is the most suitable.

Originated from Beijing Jingkai Tengda.

The fireproof floor is often used in accordance with the national fire regulations, the ground of places with special fire prevention requirements, such as: the ground of underground civil air defense projects, the ground of underground space in densely populated areas, etc.

According to the relevant national requirements, Yujiang Building Materials Technology Department has independently developed a Class A fireproof water-based epoxy floor system, which is a water-based system, consisting of water-based epoxy primer ULK701, water-based epoxy middle coating YJ2004, and water-based epoxy surface coating YJ1010.

YJ1010 high-performance waterborne epoxy fireproof topcoat is a colored epoxy resin system composed of waterborne, two-component, amine-curing, and special functional fillers.

The coating is water-based and environmentally friendly, with low VOC (volatile organic compounds) content, no heavy metals, and meets the national fire protection class A requirements. It has excellent scratch resistance, impact resistance and high abrasion resistance. Excellent leveling, no drum traces, smooth surface, good decorative effect.

It should be noted during construction that, 1use of roller or spray spread paint; 2.The ambient temperature range of painting should be between 10 and 30; 3.

The humidity range of the coating environment should be less than 75%; 4.When the air humidity is greater than 80%, it is recommended to stop the construction or increase the dehumidification equipment to reduce the air humidity before construction, so as not to affect the performance.

After the coating of the floor system, there are many excellent properties, and it is an excellent choice for places with special fire protection requirements.

1. It does not support combustion, produces very little smoke and toxic gas, and complies with relevant national regulations.

2. Effectively solve the problem of dust and sand on the cement foundation, dustproof and wear-resistant.

3. The coating is wear-resistant, anti-compression, anti-liquid penetration, rich in color, beautiful and generous, resistant to certain acid and alkali corrosion, economical and practical.

4. Water-based system, excellent coating permeability, different from ordinary epoxy simple bonding, not easy to shell.

5. It is scrub-resistant, full of color and luster, and its service life can reach 15 years.

6. The construction process is non-toxic and tasteless, and the old floor is renovated or repaired, which does not affect production.

The general epoxy floor is combustible, and now the floor made of new materials from some manufacturers is flame retardant.

Its classification can be divided into anti-static epoxy artesian flat coating (suitable for places with air level above 1000) and anti-static epoxy solvent coating (suitable for places with air level above 1000 level) according to paint varieties; It can also be divided into four types: conductive fibers, conductive mica powders, conductive metal powders and conductive additives according to the conductive materials used. Functionally speaking: anti-static epoxy flooring is used in EPA areas such as clean rooms or electronic workshops; Insulating varnish is used in general workshops.

In terms of raw materials: anti-static epoxy flooring needs to lay grounding nets, connect ground wires, and mix anti-static materials in epoxy coatings; These materials are not available in the varnish.

The main purpose of fireproof flooring is to prevent sparks from ground friction or static electricity accumulation.

Fireproof flooring is generally divided into fireproof and wear-resistant flooring and fireproof coating flooring.

Fireproof and wear-resistant flooring is a powder that has undergone strict quality control and is pre-mixed in the factory and can be applied directly on the construction site. It contains non-pyrophoric and wear-resistant aggregates, Portland cement and special imported admixtures to improve performance. This special non-flopping aggregate is strictly graded and free of impurities.

These ingredients have the characteristics of high spark resistance and wear resistance in previous lives.

Fireproof coating flooring is generally anti-static epoxy floor paint construction and fireproof paint floor construction.

Generally, it is used in places where flammable goods are located, production areas that are prone to sparks, munitions or explosive factories, hangars, textiles, pulp, printing plants and other areas where charged static electricity gathers.