How to get the wireless wifi network received by the laptop?

Install Kingsoft Guardian on your computer, and there is a Wi-Fi sharing in it. The first thing to do is to make sure you have a wireless network in your network configuration2. If not, follow the steps below:

This is how to operate the win7 system.

In the start menu, enter cmd to run as an administrator Enter netsh wlan set hostednetwork mode=allow ssid=mywifi key=12345678 This set the wireless name and link password and then turn off when prompted to appear successfully (mywifi is the name, 12345678 is the password, this can also be modified according to your wishes) and then enter netsh wlan start HostedNetwork Boot WiFi Boot the bearer network, then close the window.

Open the Network and Sharing Center, select Change Adapter Settings, right-click on Ethernet (or wifi, that is, the one that is currently connected to the network) and select Properties, tick both in the sharing, and below the first one there will be a drop-down bar to select the network to share to, don't choose Wi-Fi, choose another, and then OK.

The next Rubik's Cube Optimizer, one of the functions is shared wirelessly.

Oh This doesn't seem to be good 360 or Xiaodu can only share local networks or broadband links.

The wifi that you said about the reception of the shared machine really doesn't work.

1. First turn on your computer, and then click the start button in the lower left corner of the computer desktop.

2. Then in the pop-up interface, click on the settings option, as shown in the figure below.

3. Then after entering the settings, click on the Network & Internet option as shown in the image below.

4. After that, in the page that opens, find and tap the Mobile Hotspot option.

6. Then enter a network name, then enter the password, and then click Save, so that the hotspot is turned on.

1.Open Network & Sharing Center – Change Network Settings – and select Set up a new connection or network

2.In the dialog box that pops up, select "Set up a wireless temporary (computer-to-computer) network" - Next - Next

4.So far, we have successfully created a point-to-point wireless network, turn on the mobile phone wifi, you can receive this network, of course, you can't access the Internet, and then go on. Open Network & Sharing Center - Change Adapter Settings.

5.(If you use the client + VPN to surf the Internet, please move to the sixth point, see here for the client alone, the settings are the same) right-click "Local Connection", select "Properties", open the dialog box, select the "Sharing" tab, and set the corresponding options as shown in the figure. There may be an error message during the setup process, once it does, please turn on the "Windows Firewall" service and set it up again.

Once you've set it up, you'll see "Connection Shared" on the local connection adapter icon, just like the VPN connection in the image above.

There should also be an action to find and check Allow other computers to connect to the Internet via this link in the network connection properties of your computer. In fact, it is to share the network connection of the computer to your virtual wifi.

The method of sharing WiFi on your computer depends on your computer's operating system and network connection. In general, there are several common methods:

If your computer is Windows 10 and you are connected to a wired or wireless network, you can set up a mobile hotspot to share WiFi. The specific steps are as follows:

Select Start, then select Settings> Network Failure and Internet, > Mobile Hotspot.

For Share my internet connection from, select the internet connection you want to share.

For Share by, select how you want to share the connection via Wi-Fi or Bluetooth.

If you choose Wi-Fi, you can set a network name and password and have other devices connect to the hotspot.

If your computer is Windows 7 or Windows 8 and you are connected to a wired network, you can share WiFi by setting up a wireless temporary**. The specific steps are as follows:

Open the Network and Sharing Center, either by clicking on the networking icon in the lower-right corner of your computer, or by opening it from the Control Panel.

Enter a network name and password, then click "Next".

Select "Scrambled Internet Sharing" on the left, and then click "Wi-Fi Options" on the right to select the Internet connection you want to share.

Tick the option "Allow other network users to connect through this computer's Internet connection" and click "OK".

If your computer is a Mac system and you are already connected to a wired network, you can share WiFi by setting up internet tethering. The specific steps are as follows:

Tap "System Preferences" and then "Share".

Select "Internet Sharing" on the left, and then click "Wi-Fi Options" on the right.

Enter a network name and password, then click OK.

In the "Share your connection from other computers" drop-down menu on the right, select the Internet connection you want to share.

On the right side of the "To share your internet connection through the following ports" list, tick the "Wi-Fi" option.

Tap the checkbox next to "Internet Sharing" in the top left corner and tap "Start" to confirm.

Method 1

1. **And install the wifi sharing wizard, before the sharing wizard is installed, it will detect whether there are two network cards on the local computer (one network cable is connected to the Internet, and the other is used as a wifi hotspot output), and the necessary plug-ins for running the sharing wizard, such as. net frame sp1, etc. Once the installation is complete, it's a good idea to restart your PC

2. Enter the name you want to share at the hotspot name on the main interface, and then click "Start" on the right, after a while, the word "Start" will become "Stop", which means that you can share the network without password!

3. If you want to set the wifi sharing password to share the network, you can choose the sharing mode as "point-to-point ad-hoc, wep encryption", and then at the top. Enter the password of wifi in the shared password area, click "start", and then you can share the network with the password

4. The word "start" on the interface of the wifi sharing wizard of wifi sharing will become "stop":

5. When a WiFi terminal device is connected to a hotspot shared with WiFi Sharing Wizard, the connected device will be displayed on the connection status on the main interface. If you uncheck the box under Network Sharing, it means that the device is not sharing the network, which means that the device is not allowed to access the Internet

Method two

Step 1: First, move the mouse to the lower left corner of the desktop of the Win8 system, and select "Command Prompt (Administrator)" in the shortcut menu for mouse email;

Step 2: Then open the Command Prompt with administrator privileges, enter the following command in the Command Prompt:

netsh wlan set hostednetwork mode=allow ssid=test key=0123456789

Step 3: Find the network icon in the lower right corner of the desktop of Ghost Win8, and right-click to open "Open Network and Sharing Center".

Step 4: Select the "Change Adapter Settings" item, if you don't find this item, you need to start the virtual Wi-Fi connection first, then you can find the "Change Adapter Settings";

Step 5: Go back to the Command Prompt window and enter the following command:

netsh wlan start hostednetwork

Step 6: When we return to the interface of "network connection", we can find the virtual network connection of win8 pure version, right-click on the network connection of Ethernet and select "Properties", and then find the option of "sharing", select the network we just virtualized, then the wifi hotspot of the win8 system is established.