Why can t the computer get up The word 10 appears when it is turned on

It is recommended that you reinsert your memory stick. If the fault persists. You can only reinstall the system.

Because the memory module is abnormal, the file cannot be loaded into the memory normally. The prompt is that the file is missing. Another possibility is that it is really lost.

There are two types of such losses. One is that it is indeed deleted or lost. The other is that there is a problem with the sector of the hard drive.

Files are missing. So reinstalling the system will solve the problem.

This kind of prompt will appear when the system of the hard disk is broken or the hard disk cannot be found. If it is the first case, you need to reinstall the system, and if it is the second case, you need to check the connection of the hard drive.

Addendum: My computer is I have many such experiences Besides, it may be that there is a lack of files, and it is forgiven that reinstallation does not solve the problem, but if you can't even bring up the problem, then you can't blame anyone.

System files are missing Just redo the system.

This refers to the loss or corruption of files in Windows System 32 Drivers, which is generally caused by accidentally deleting files or system files being damaged by viruses and Trojans. Hope it helps.

Good luck with your computer soon**.

Hope!!!

Summary. The way to turn on the computer is as follows: 1. The only thing you need to do is:

Wait patiently for it to finish, and it will automatically restart when it is done. If you can't get into the system after restarting, you need to reinstall the system. 2. If you need to enter the system in a hurry, you can also press the esc key to skip the automatic repair and directly enter the system when the self-repair* surface appears, but the next boot will still need to be repaired, and often skipping the automatic repair is easy to cause damage to the hard disk.

What should I do if my computer starts up like this?

The way to start the computer and appear in such a family of eggplants is: 1. The only thing you need to do is: wait patiently for it to be completed, and it will automatically restart after completion.

If you can't get into the system after restarting, you need to reinstall the system. 2. If you need to enter the system in a hurry, you can also press the esc key to skip the automatic repair and directly enter the system when the self-repair* surface appears, but the next boot will still need to be repaired, and often skipping the automatic repair is easy to cause damage to the hard disk.

Press F1 to continue, but next time. Press del to enter the state CMOS settings, set the date and time correctly, modify the parameters that are inconsistent with the hardware, it is recommended to restart, press the setup hotkey prompted on the screen to enter the sensitization BIOS settings, first see if the hard disk is recognized, if you recognize the balance, set the hard disk as the first boot item to try, it doesn't work, reinstall the system.

There is a problem with the broadband network.

1. Solution:

1) Whether the computer as the server is shut down, whether the server has been uninstalled, and whether the LAN has been disconnected.

2) Whether the server has been installed on the computer that is the server.

2. If the wifi signal of the mobile phone is weak or unstable, resulting in frequent drops, it is recommended:

1) Check whether other devices connect to the wireless network to see if the signal is good or full.

2) Check whether there are many devices connected to the wireless network.

4) If it is a home router, it is recommended to turn on the power supply for a period of time and then plug it in again to try to open the spine.

1. The motherboard BIOS battery is out of power, resulting in booting directly into the BIOS, you need to replace the BIOS battery, and then reset the BIOS inside.

2. There may be a problem with the BIOS settings, the hard disk boot item is wrong, and the system hard disk in the boot needs to be set as the first boot item again.

3. It may be that the hard disk appears, first of all, you need to see if you can recognize the system hard disk in the BIOS, or use PE software to see if there is a hard disk, if not, then you need to replace the hard disk again. If you can recognize it, then it may be a system problem, and you only need to reinstall the system (you need to back up your own data).

This is the interface to enter the BIOS.

Fault cause: ntldr is missing is generally caused by netizens mistakenly deleting ntldr files, and the current Trojans and viruses have not seen the behavior of deleting ntldr. So what to do when you encounter ntldr is missing, here we need to use the installation disc of the operating system.

Solution 1 showing ntldr is missing (for genuine systems):

1First of all, enter the BIOS settings to boot from the disc, then insert the XP system installation disk to reboot, after the "Welcome to Installer" interface appears, we select "To repair Windows XP installation using the recovery console, press R".

2. After entering the system fault recovery console, go to the C drive, 3, then enter "copy x:i386ntldr c:", press enter (X represents the disc drive letter), copy the NTLDR in the disc to the root directory of the system disk, 4, and then enter "exit" to exit the console, take out the disc and restart, if the reboot is missing without NTLDR, then it means that the copy is successful.

Solution 2 showing ntldr is missing (for non-genuine systems):

1 First, enter the BIOS settings to boot from the disc and then insert the system disc to reboot.

2. Reinstall according to the prompts.

Solution 3 showing ntldr is missing (for non-genuine systems):

Turn on the computer, press and hold F11, and select Enter One-Click Restore System Restore.

If you have the ability to reinstall the system, you should send it to a repair shop if you can't.

The system files are missing, and the system needs to be reinstalled.

I can't get into the system, try restarting. If not, it's time to change the system.

Reasons for this phenomenon:

1.It may be that there is a problem with your ghost installer, it is not omnipotent, and it cannot effectively read this system image file, I have encountered this situation.

2.There may be a problem with the system image file.

3.It may be that the motherboard is not tuned from the hard disk from boot.

4.Bad sectors on the hard disk.

How to solve:1Set all the motherboards to boot from the hard disk, boot into blos, no motherboard is different, my motherboard is in advanced

blosfeatures, how to tune you from the Internet.

2.Re-next a better ghost installer, ghost installer.

Chinese Simplified Chinese version, this one is very good, I use it all the time.

3.Looking for a better system again, the system of Little Shrimp Studio is great.

Thirsty, it's okay to change the system.