When parking, how to see the distance between the tire and the road teeth

Updated on Car 2024-04-17
4 answers
  1. Anonymous users2024-02-07

    Judging the distance of the car in front:

    1. About one meter when you see the upper edge of the bumper of the front car from the lower edge of the windshield;

    2. When you see the lower edge of the bumper of the front car (the knee of the person's foot) from the lower edge of the windshield, it is about two meters;

    3. About three meters from the lower edge of the windshield when you see the lower edge of the front car and the lower edge of the rear tire (or see the ground);

    4. The horizontal line relative to the ground seen on the lower edge of the left rearview mirror is the position of the front of the car.

    The right rearview mirror judges the distance between the rear car:

    1. When the rear car shadow occupies all the rearview mirrors, the distance between the cars is about 3 meters;

    2. When the rear car shadow occupies two-thirds of the rearview mirror, the car distance is about 5 meters;

    3. When the rear car shadow accounts for one-half of the rearview mirror, the distance between the car is about 9 meters;

    4. When the rear car shadow accounts for one-third of the rearview mirror, the distance between the cars is about 12 meters;

    5. The left rearview mirror sees the rear wheel cover in the middle (rear door grip, body horizontal line or rearview mirror bottom line reflection) relative to the ground is the rear position.

    6. Judge the distance between the rear car through the rear view mirror ** rear window windshield: if you see the upper edge of the rear headlights, the rear trunk is about three and a half meters away from the rear car; If you see the junction of the rear car compartment cover and the front windshield, the rear trunk is one meter away from the rear car; If you see the horizontal third of the front windshield of the rear car, it is basically up.

    Determine the position of the vehicle (wheel position, front and rear position):

    1. Judge the position of the roadside in the windshield (the left wheel is 10-15cm to the right of the left pillar of the windshield; The right wheel is 5-10cm to the left of the windshield centerline); The distance from the curb can be seen in the rearview mirror.

    2. Judge the position of the right wheel (the middle of the front or the right wiper): the relative ground on the right side of the front cover.

  2. Anonymous users2024-02-06

    Speaking of lateral parking, this is one of the driving difficulties for many novice drivers. However, in daily use, it is often necessary to pull over and park on the side. If you park too far, you may exceed the outer edge of the parking space and easily scratch other vehicles passing by on the road.

    But if you park too close, you will accidentally scratch the wheel hub and tire wall, which is really annoying. Don't worry, the old driver teaches you how to judge the distance between the wheel and the curb. This method is really simple.

    Without other auxiliary electronic imaging equipment, it is difficult to see the actual distance of the vehicle from the curb through direct observation while sitting in the driver's seat, especially the wheel part cannot be seen at all, and the body plays a role in safety protection and shelter for the people in the car, which will inevitably produce a sense of isolation, both novices and veterans. However, for people with skilled driving skills, the key to judging the distance of their vehicle from other surrounding obstacles faster and more accurately is to be able to find some auxiliary references.

    Next, let's take a Toyota car as an example and demonstrate how to park on the right side by a point on the car, keeping a reasonable distance of 30cm between the wheels and the curb. Generally speaking, some drivers prefer to use the front position of the hood of the vehicle to help locate side parking, but there is a problem that the body size and proportions of different parts are not the same in different models. Coupled with the influence of the driver's height and sitting position, Naiqing even has some models that can't see the front of the hood when sitting in the driver's seat, such as this Toyota used for demonstration.

    So, this time, the reference point is the convex node of the left wiper. First, turn the steering wheel slightly to the right to allow the vehicle to slowly move to the edge of the road. Then, when viewed from the driver's seat, this node of the left wiper coincides with the upper edge of the curb.

    At this time, you need to reverse the car and keep driving forward. In the process, the body is straightened and leveled with the curb line. At this time, get out of the car to observe and measure the direct distance between the right wheel of the vehicle and the curb of about 30cm, and then the left side of the vehicle is far away from the outside of the parking space, and finally it should be pointed out that the left wiper node mentioned above is only a reasonable reference point for parking on the right side of the car, and the difference between the model and the driver's sitting posture will have an impact on the final result.

    Just as a demonstration reference, you can find a similar reference point for pulling over according to the actual situation of your vehicle.

    Millions of car purchase subsidies.

  3. Anonymous users2024-02-05

    1. Judge the distance between the body and the left sideline.

    The cab of a car in China is on the left, so the driver has a better grasp of the situation on the left. Remember a rule: you should consciously keep to the left when driving, because there are more blind spots on the right.

    Let's talk about the distance: the width of the general city road is, the width of the ordinary car is, and the body distance from the left side line is the most appropriate.

    Judgment skill: When the left corner of the front cover intersects with the left edge of the road, the distance is about.

    2. Judge the distance between the body and the right sideline.

    When measuring the distance between the vehicle body and the right side line, it is also necessary to consider the height of the road teeth and the traffic conditions of the road section, so as to ensure that it is not too far away from other cars, and it is not too close to the chassis of the vehicle.

    Judgment skills: Maintain a normal sitting position, look out, the right side line extension line and the bump point of the vehicle wiper just intersect, at this time the body is about 30cm away from the right side line.

  4. Anonymous users2024-02-04

    Three-wheel docking: 1. Steering - right steering, 2. Turn right to look at the mirror and step on the brakes (is slow - not stop), 3. When the car slows down, hit the steering wheel to the right 1 point that is, one wheel (the speed is getting slower and slower), (when the car trembles, press the clutch to the end) When the front nose of the right car is about 1 meter away from the right side of the road (you can find a reference point, such as a glass water nozzle or the like), hit the two square wheels about 2 points, turn the car back to the right, and the car is back to the direction of the three wheels.

Related questions
20 answers2024-04-17

The first is to find a place to park without a no-parking sign, where you will not be fined for not parkingIn addition, as long as it does not affect the normal driving of other cars, the traffic police will not care about you. And everyone should also be careful not to go to a place with cameras to park. Especially at traffic light intersections, if you are captured, you don't need the traffic police to come and punish you, and there will naturally be a text message to notify you. >>>More

9 answers2024-04-17

It's not a problem that you're not confident.

I think it's a matter of mentality. We have a frank mind, we have to look others in the eye, we have to see that they don't dare to look at us, hehe, just kidding. >>>More

11 answers2024-04-17

The wear limit of the tread pattern is 1 6 mm, and the wear limit of the radial tire pattern for trucks and buses is 2 0 mm. The tire tread depth is checked according to the following criteria: Good: >>>More

8 answers2024-04-17

When I watched it for the first time, I understood what kind of story it was, but our predecessors had done it, so we can all know what kind of story it is, and then we need to understand what kind of story it is, and then we have to look at it from beginning to end. >>>More

13 answers2024-04-17

None of that, believe in yourself.