How does Samsung i900 go online?

Dear Samsung users: the model you consulted is not listed in the mainland, we have no relevant targeted information, you can refer to the relevant setting methods of similar problems of the models listed in the mainland, if you cannot access the Internet with data traffic, it is recommended that you try the following steps: 1. Check whether the SIM card is enabled GPRS Internet service or temporarily closed.

To use the mobile phone data Internet function, the ** card needs to activate the data data Internet service. You can contact the local network provider of **card** to open the data traffic Internet service. 2. Check whether the "Mobile Data" switch is turned on.

Slide your finger down on the top curtain of the screen and turn the "Mobile Data" dot green. 3. Please change to other ** cards to try 4, or you can try again in a different time period or network environment. 5. Back up your mobile phone data (**book, text message, **, etc.), restore your phone to factory settings, if the fault persists, it is recommended that you send your mobile phone to the nearest Samsung service center for testing and repair, and it is recommended that you make an appointment to apply for "appointment to the store" on Samsung's official website to enjoy priority repair services.

After the appointment is successful, please bring your machine, invoice and warranty card to the service center where you made the appointment on time. Comments, suggestions, complaints, please click:

i900 i908 GPRS Internet Settings MMS Settings Detailed**Instructions!

If you want to be able to send and receive MMS messages, you must first set up the Internet.

The first GPRS Internet settings: follow the figure below to start selecting the settings.

In Settings, select the connection icon in the connection options page!

Start by clicking Add New Modem Connection under My Internet in the image below.

You can enter the connection name by yourself. Here first enter CMNET, select ** line (GPRS) in the modem, and then the next step.

Neither the username nor password needs to be entered, and you can click Done.

Here you can see that there will be an additional CMNet connection in My Internet.

Next, select Add New Modem Connection in the Unit Settings.

Enter CMWAP for the name, and select ** Line (GPRS) for the modem selection and enter the CMWAP for the gulation point name

Leave your username and password blank and do not enter them. Directly click to finish.

Next, there will be an additional ** server to set up my ** in the unit settings. Click on this.

Connect to the Internet on this network and connect to the Internet using a server on this network are ticked. In Server, enter and select Advanced.

Next, change the WAP and security WAP to the following ports, and you don't need to change them.

Once you have done the above few steps to set up. Now you can go directly to the Internet.

Novices will not insert** do detailed instructions Forgive me!

I don't know if the landlord is referring to the setting of the mobile phone Internet access Actually, the current ROM is automatically set.

The i900 downstairs is the predecessor of the i9000!!

Setting up a new phone is easy

Just enter. #

You can automatically set up the Internet convenient, remember to enter it all after entering it will become - this is normal.

Application -- Settings -- Wireless & Networks -- Mobile Networks -- Mobile Networks -- Access Point Name:

Press the lower left menu key"Name of the new access point"

1.Name: cmnet

2.Access point name: cmnet

3.:(Empty).

4.Port: (empty).

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

9.MMS**:

10.MMS port:

11.MMS Protocol: WAP is selected here

02 (Some machines need to set 00, the native Chinese version can only be set 02) 14Authentication Type: CHAP

15.Access Point Name Type: (Internet) When you're done, press Menu and select Save

Tap: Applications --Settings --Wireless & Networks --Mobile Networks --Mobile Networks --Access Point Name:

Press the lower left menu key"Name of the new access point"

1.Name: China Mobile Mobile Internet access.

2.Access Point Name APN: CMWAP

3.**：4.Port: 80

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

Remember to add "http: "Otherwise, you can only send and not send) 9.MMS**:

10.MMS port: 80

11.MMS Protocol: WAP is selected here

02 (Some machines need to set 00, the native Chinese version can only be set 02) 14Authentication Type: CHAP

15.Access Point Name Type: When you have finished typing (mms), press menu and select Save

2. Internet settings:

Tap: Applications --Settings --Wireless & Networks --Mobile Networks --Mobile Networks --Access Point Name:

Press the lower left menu key"Name of the new access point"

1.Name: cmnet

2.Access point name: cmnet

3.:(Empty).

4.Port: (empty).

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

9.MMS**:

10.MMS port:

11.MMS Protocol: WAP is selected here

02 (Some machines need to set 00, the native Chinese version can only be set 02) 14Authentication Type: CHAP

15.Access Point Name Type: (Internet) After finishing, press Menu to select "Save" If the mobile signal icon shows R, put a checkmark on Application - Settings - Wireless & Network - Mobile Network - Mobile Network - Data Roaming.

Eh, mobile phone Internet access is very simple, let's see for yourself.

Press "Settings" to have "WLAN" and "Mobile Network Settings", check the options behind "WLAN", and you can use WiFi to surf the Internet. Select "Mobile Network Settings", select the network mode, you can select according to your needs, etc., the operator will automatically select, check Enable Always Connect to Mobile Data, and you can go online.

There are two ways to get online on the Samsung i9000:

1. Turn on the wifi on the mobile phone, connect the wireless router and other wireless devices and surf the Internet through the wifi network.

2. The mobile phone is connected to the Internet through the mobile network provided by the operator.

Application -- Settings -- Wireless & Networks -- Mobile Networks -- Mobile Networks -- Access Point Name:

Press the lower left menu key"Name of the new access point"

1.Name: cmnet

2.Access point name: cmnet

3.:(Empty).

4.Port: (empty).

5.Username: (empty).

6.Password: (empty).

7.Server: (empty).

9.MMS**:

10.MMS port:

11.MMS Protocol: WAP is selected here

02 (Some machines need to set 00, the native Chinese version can only be set 02) 14Authentication Type: CHAP

15.Access Point Name Type: (Internet) When you're done, press Menu and select Save