Please teach the motherboard power pin insertion, which pin of this motherboard is the boot pin?

You're talking about the jumper on the motherboard, and the jumper socket on the motherboard should be indicated next to it, or look at the motherboard manual, and you can plug it in accordingly!

If there is no explanation, teach you a simple method, you use a metal sheet that can conduct electricity, put two pins on the motherboard, two connections, you see when the two pins are connected together, the computer starts to start, just say that the two pins are connected to the power switch, power sw means the power switch, connect him on the OK, and then in the state of the computer boot, also the same way, the remaining pins two, two connections, when you find which two connections when the computer restarts, these two are the switches of reset health, reset sw means reset key! Pick it up and you're good to go! Finally, the remaining hard disk indicators, as well as the power indicators, you don't have the motherboard manual, so you can only plug them one by one and try it out!

However, the power indicator should be divided into positive and negative poles, don't plug in the wrong way, be careful of the jumper to burn, the others are not divided into positive and negative, it really doesn't work, the indicator light, you can not connect it, anyway, it doesn't affect anything, just connect the switch and the reset button on OK!

There is no better way than this!

I'll tell you a good way (there is a certain risk, but it is also a risk that is not encountered in a thousand years) This hand is very smart, and it is generally okay if there is no word.

You don't plug anything in, and then connect the power supply, you use a change cone, take two copper pillars as a group, try (meaning to let the change cone connect two adjacent copper pins), start with the words similar to power sw, pay attention to two as a group.

Method: Use the change cone to take two copper pillars as a group, point. If you click it right, (tap to the power start pin) your machine will turn on.

Maybe the upstairs will laugh at me, to be honest, I repair it every day, there are motherboards of any year, and there is no standard standard, if you don't try, how can you do it. The first thing to look for is the jumper at the beginning of the power supply, and then look for a small speaker, that is, those copper pillars with the words speak or speaker, this is not positive or negative, it is a four-pin one, just plug it in, find this, the side is the copper pin of reset restart, and you can try the rest, power light, hard disk light. There is not so much to say about the head, the colored ones are the positive poles, except for the black.

Look carefully at the motherboard, there is a jumper table on the top, and the color of the jumper is on the left (the switch has no positive or negative restart) The power switch is generally PW restart, reset hard disk light, HDD led, power light, PW led, and then touch the jumper with a metal object (to touch 2 jumper pins) In this way, you can find out the power supply and restart without a jumper table.

Oh, I've also encountered your problem, and the pins are bent off, I moved back to try it myself, I don't know if the motherboard is the same, I just helped you see my main version, the words on the top are too small, I can't see clearly, the power supply is pow LED seems. A total of 5 pins, (..)Choose the last two.

In addition, if it doesn't work, try it one by one, no problem, I tried it one by one, a total of 4 groups around are the power supply, cold up, alarm, hard disk lamp pin, in addition, the upstairs said that it is a good way to use the cone to test, do not change the cone casually with a metal thing to try, don't be afraid, the current is very small, the electricity is not you, if you take the machine to start, that's it.

The power supply is PW, the reboot is RESET, the power indicator is PW LED, and the hard disk light is HD LED

From the line, black or white is the negative pole, and the other colors are the positive pole, and the motherboard has the above logo description.

The power supply is plugged in on the reboot and plugged in the indicator.

Hard drive light try put.

You are observant.

You'll notice that next to the jumper you plug in will have your name spoken in English.

pwr rest spk

Both.

Those wires should have prompts on the motherboard, HD is the hard disk light, you can turn on the computer and try one by one, it's very simple, try one by one, it won't be short-circuited.

Power supply: HDD LED 2in1, power indicator: power sw 2in1, restart: reset sw 2in1

That's it.

Generally, the word on the needle cap is facing outward, that is, after plugging in, we can directly see the word on it, take a closer look at the motherboard, there will be instructions on it, not necessarily near the needle corner.

Use the outermost row, there should be small words on the motherboard, and the plug word is outside, corresponding to the plug.

It is usually noted on the motherboard, especially near the pins, but it may also be in other places, such as the middle of the motherboard.

Don't you have a master manual? If you have one, please read the manual.

Generally, the color is light-colored.

First easy and then difficult, let's do it!

1. The fpanel1 on the right side of the third picture is connected to the buttons on the front panel of the case, such as booting and restarting, and restarting.

2. The specific boot pin is the 2 pins on the right side of the upper row, and the two pins on the left side of the upper row are the power indicators; The two pins on the left in the lower row are the hard disk indicators, and the two pins on the right are the restart buttons.

Summary. How to insert the boot and reboot pins of the computer motherboard.

Hello dear, there are generally several rows of pins in the lower right corner of the motherboard, and if you look closely, you will find that there are very small words next to the pins power The 2 next to it are the switch res....Restart These 2 don't take into account the positive and negative poles. Hope it helps.

How to insert the boot and reboot pins of the computer motherboard.

Computer motherboard boot and reboot pin insertion method Hello Ziheng, generally in the lower right corner of the motherboard there are several rows of virtual pins, take a closer look will find that there are very small words next to the plug to do the needle power next to the 2 is the switch res....Restart These 2 don't take into account the positive and negative poles. Hope it helps.

Abbreviation of boot pin: POW SW reboot pin. reset these two and vertical pins up and down; POW SW on the edge of the POW LED, reset on the edge of the HDD LED, the three-pin POW LED (power indicator type Huai) motherboard is different, I hope you can help you.