What should I do if there is a problem with the meter and the meter is abnormal?

First divided into two parts to you: 1 you first unplug all the electrical equipment, you see if your meter goes, if not, it means that you use electrical appliances to leak electricity, you focus on your water dispenser, because you are turning off the electrical appliances, not electrical equipment and power disconnection, if you go, it means that the circuit of your house has leakage, you can find an electrician to pay a clamp meter to measure the two outgoing wires of your house meter, to see if the current of the two wires is the same, if the current of the two wires is not the same, This proves that your house is leaking, because there is no scene, it can only be given to you like this.

Boil water twice a day with electricity rats for 15 minutes each time, which is 15 kilowatt-hours of electricity a month; The power of the mobile phone charger is small and negligible; The working state of the computer is not the same, its power is not the same, the power supply of the general laptop is about 100 watts, there is no specific use time, this is not easy to calculate; There is also a water dispenser, which is usually 500 watts, maybe you forgot to turn it off, this is very power-hungry. In general, yes.

According to the power and the time consumed by your school life, theoretically it should be less than 22 kWh. (refers to the case where you stay alone for more than a month).

Find a school to let someone from the Electricity Bureau come to the side meter, there must be a problem!

Get an electrician, there must be a problem.

How to deal with problems with the meter:

First, determine the accuracy of the meter.

Most of today's household meters use electronic counting with a red light-emitting diode on it.

When it is bright, it means that there is electricity, when it is flashing, it means that it is using electricity, and the faster it flashes, it means that it consumes more electricity; In the mechanical meter, the rotation of the aluminum disc is used to count, and every 3600 revolutions of the aluminum disc is counted as one kilowatt-hour of electricity; For example, according to the design of the mechanical meter, every time it is lit (a pulse), the electricity consumption is 1 3600 kWh, that is, it is lit 3600 times within 1 hour, and the electricity consumption is one kilowatt-hour; If you feel that the meter is too fast, you can connect a 100-watt ordinary light bulb alone, it takes one hour, and the standard electricity consumption should be kWh, which can be seen on the meter whether the meter is accurate or fast or slow!

2. Determine whether electricity has been stolen.

According to your description, if the meter is abnormal, in order to avoid the subsequent impact on your electricity consumption and billing, please report to the owner of the meter in time, if you belong to the electricity customer of Guangdong Power Grid, please call the 24-hour power supply service **95598, and the power supply company will arrange staff to follow up and deal with it.

We hope you find ours helpful.

The meter is a commonly used instrument, although the relevant departments have focused on its management, but there may be some failures, such as measurement deviation, aluminum disc stuck, fast and slow when walking, noise during operation, etc. If you have a certain electrical knowledge, you can solve some small problems in daily use. However, when it comes to the structural problems in the meter, do not open and disassemble it by yourself, and should be overhauled and handled by the power department in time.

What should I do if there is an abnormality in the meter? Check the obvious excessive electricity consumption: 1. Pull down the main switch under the meter, and the meter should be stopped, otherwise there is a problem with the meter.

2. Find leakage after confirming that the meter is normal: unplug and turn off all electrical appliances, and use the multimeter RX10K file to measure the resistance of the live wire to the ground wire and the live wire to the neutral line of the main switch, if the resistance value is infinite, it indicates that the line is intact and does not leak. If there is a leakage resistance value in the measurement, indicating that the line is leaking, it is necessary to disconnect each branch one by one to find it in sections, and the common leakage parts are:

Toilets, wet parts of the kitchen, wires, switches, sockets. High-power switches, sockets, wire connectors. The wire is bent and moves.

Scratch area. 3. If the circuit is in good condition after testing, finally use the multimeter RX10K file to check whether the insulation of the electrical plug wiring to the metal shell is good, and focus on checking the electrical appliances that come into contact with water such as washing machines, water heaters, etc.

First determine the accuracy of the meter Most of the current household meters are used for electronic counting, with a red light-emitting diode on it, which indicates that there is electricity when it is bright, and when it is flashing, it means that it is using electricity, and the faster it flashes, the more electricity is consumed; In the mechanical meter, the rotation of the aluminum disc is used to count, and every 3600 revolutions of the aluminum disc is counted as one kilowatt-hour of electricity;

The easiest way is to report to the power company and let them come over to check, otherwise there will be an abnormality in the end, and under normal circumstances, it will cost you more money.

If there is an abnormality in the meter, the power supply should be cut off immediately to prevent the meter from catching fire due to failure. Ask a professional electrician, do a thorough inspection, see what the problem is and deal with it.

You need to write your own filter judgment, hint: the common characteristics of the tags are"<"or">", you can read the entire file as a file stream, then screenshot the tags, and the rest is the content!

Common faults and solutions in the use of electricity meters and programs Meter LCD display: E1: means that the remaining amount is zero E2: indicates the alarm power, and the card can be restored E3: Overload trips, and the card can be restored E

You can find a professional electrician to check it for you and use some professional tools to measure it. It's not good for individuals to do.

If there is an abnormality in the meter, it means that there is a problem with the voltage, so solving the voltage problem can solve the meter.

What should I do if the electricity consumption of the meter is abnormal? Answer: How to check if the electricity consumption is obviously excessive:

1. Pull down the main switch under the meter, and the meter should be stopped, otherwise there is a problem with the meter.

2. Find leakage after confirming that the meter is normal by the above method: unplug and turn off all electrical appliances, and use the multimeter RX10K file to measure the main switch.

3. If the circuit is in good condition after testing, finally use the multimeter RX10K file

If someone asks me, what is rejection? I'll be sure to tell him the full meaning! If someone asks me, what is mediocrity? I'll be sure to say, "What do you think? —Epigraph.

When I saw this essay title, two huge words "vulgar" appeared in my mind, and a sense of joy spread to my mind. Thoughts poured in, patting on my shore, words colliding with each other, voices becoming more and more violent, "waves" rising higher and higher, crashing against the Berlin Wall formed by these four words, but none of them could break through. The dazzling sunlight was constantly shifting, and the shadows covering the "sea" were getting bigger and bigger, and I couldn't tell whether it was dark or blank.

It successfully rejects all the mediocre words in my mind, what seems to be vulgar is not necessarily vulgar, what seems noble is not necessarily mediocre!

Man is given the power to accept or reject from birth, some substance, or some spirit. Every time power is exercised, a certain "element" will inevitably undergo a qualitative change imperceptibly, whether it is slow or galloping? On the "surface" or "underground"?

And what kind of "element" will it combine with to react, is it physical or chemical? But the only thing that is certain is that the result of the reaction will be the result of the new substance, now or in the future, and there is some kind of influence.

Growing up is a process of gradually isolating and helpless, you have to work hard to become strong, and then take charge of yourself.

1. If the meter fails because of the responsibility of the power supply company or some non-human factors, the power supply company should be responsible for replacing the meter and no fee will be charged.

2. Meter failures caused by other reasons should be borne by the users themselves.

3. If the meter is lost, broken or burned out due to overload, the user should tell the power company in time to facilitate the power company to take measures in time.

4. If the meter is caused by water ingress into the meter box, such as switch tripping, power outage, etc., you can call customer service **95598, and the power supply department will arrange relevant personnel to deal with it; If the meter is burned out, you need to bring the ID card of the head of the household to the local power supply station to apply for a meter replacement.

According to your description, if the meter is abnormal, in order to avoid the subsequent impact on your electricity consumption and billing, please report to the owner of the meter in time, if you belong to the electricity customer of Guangdong Power Grid, please call the 24-hour power supply service **95598, and the power supply company will arrange staff to follow up and deal with it.

We hope you find ours helpful.

2018-12-18 What should I do if I suspect that there is an abnormality in the meter? 6 2017-06-04 Is there any easy way to suspect a problem with your home meter 6 2013-07-22 What should I do if I suspect that there is a problem with my meter? 3 2018-01-23 Hello, I suspect that there is a problem with my home meter, how can I check it?

2 2018-01-27 What should I do if I suspect that there is a problem with the meter The electricity bill is not normal after changing the meter.

If you think that the metered energy meter is inaccurate, you can bring the identity certificate of the electricity user to the business hall to apply for meter inspection.

2. Please ask the legal metrology verification agency to carry out calibration. If there is still doubt about the results of the power supply company's inspection, we can also go to other legally qualified metrology verification institutions to inspect the meter.

3. It should be noted that you must not disassemble and assemble the meter by yourself.

Possible causes

1. It is possible that the switch in the house is larger than the switch of the meter, and the electricity consumption is often overloaded (relative to the switch of the meter entering the house);

2. Another possibility is that the wired insulation between the switch in the house and the switch of the meter is damaged, and the power consumption will cause a short circuit fault;

3. Another possibility is that the wire of the switch of the household meter is loose and needs to be tightened.

Protection of home circuits.

The first line of protection is the sub-switch of each circuit in the home distribution box. This switch is also a protective measure at the end of our electricity. For example, almost all the socket circuits in our home are leakage protection switches.

For the lighting circuit in the home, almost all of them are selected air switches.

The second line of protection is the main switch in the home distribution box. According to the different choices, the main switch is actually divided into two situations: one is the air switch, and the other is the isolation switch.

Both of these switches can be used to control and protect the various branch circuits below to meet our requirements for safe electricity and operation safety. Burnout.

The third protection is the main gate at the lower mouth of the meter in the outdoor public meter box. All the electricity in our family is connected from the lower mouth of the meter, and first of all, there is a main switch at the lower mouth of the meter to connect our indoor electricity. Therefore, our indoor electricity is protected by this main gate.

According to your description, the calculation of household electricity consumption is more complicated, involving the power of electrical equipment, the duration of use, the frequency of use, the old and new conditions, etc.; If you have any questions about your electricity bill, we recommend that you check whether any of the following conditions are occurring in your home

1. High-power equipment at home, such as electric water heaters, and air conditioners are in standby mode for a long time, resulting in electricity generation.

2. There is a fault in a certain electrical equipment, resulting in an increase in power consumption;

3. There is electricity theft and leakage behind the meter.

Corresponding workaround:

1. Turn off unnecessary electrical equipment;

2. Contact the manufacturer of electrical equipment to repair the faulty equipment;

3. Entrust a qualified electrician or construction unit to inspect the indoor circuit.

If you have checked that this does not belong to the above situation, it is recommended to call the 24-hour power supply service**95598, and the power supply department will arrange an account manager to follow up for you.

We hope you find ours helpful.