The master of making paper airplanes comes in, how to make paper airplanes

It's illustrated, so you should be able to understand it.

Recommended, the pointed head of the plane flies fast, fly far, the flat head of the plane flies steadily, can stop in the air for a long time, the most important thing is that the two wings of the plane should be symmetrical, so that it will not turn in circles in the air, in addition to the plane can not be top-heavy, otherwise there will be a spiral down.

First of all, make sure that the center of gravity is in the front half of the aircraft, if the nose is too heavy and causes it to fall, you can fold the edges of the wings slightly upwards; In addition, in order to ensure flight stability, the nose must be made a little heavier. The wings must be folded upwards, and from the front, they should be roughly in a "Y" shape; Moreover, it is necessary to ensure that both sides of the plane are symmetrical, otherwise it will not fly smoothly and it needs to be folded again; When tweaking the shape of the aircraft, be patient and don't rush to change the basic design.

1.Fold the A4 paper in half along the long side.

2.Fold the top corners in half towards the central axis.

3.Fold the two adjacent corners to the central axis until the vertices of the two corners coincide on the central axis4Fold one side of the drawing in half along the central axis.

5.Fold the wings along the trajectory shown in the diagram.

6.Fold the head of the machine along the 2 cm dotted line to both sides, and then fold it up by 7Squeeze the tip of the nose into the fuselage**.

8.Then turn the nose to the sides.

9.Fold the tail to the sides, then fold it towards the central axis between the wings until the apex of the tail touches the central axis.

10.Put the rear of the fuselage and squeeze the tail slightly from top to bottom.

11.Fold the wings in half along the dotted line toward the central axis.

12.Fold the folded wing outwards until the inside and outside coincide.

It's been a long time! I want the paper airplanes I stacked back then to fly n far!

It's just a little simple, and I played a lot when I was a kid.

It's good to weave paper airplanes.

But that was many years ago.

My plane was the farthest fly among my friends.

Well, you're an F-117

The paper airplane method is as follows:

1. Prepare materials: a quarter of A4 colored paper.

2. Fold the 21x15 cm origami in half along the long side, fold the two corners in half to form a triangle towards the midline, and fold it 2 more times.

3. Fold the end outward, then fold it in half along the midline, and fold the middle part upward.

4. Open the middle part and press it down and fold it flat, and fold the two ends upward.

5. Concave the middle part along the crease, and fold the end up.

Paper airplane is a toy airplane made of paper, it is a toy that children like, it may be the most common form of aviation origami handicraft, it is the easiest to master a type of origami, loved by beginners and even masters. The simplest way to fold paper airplanes can be done in just 6 steps.

You can use a rectangular piece of paper, such as A3, A4, or Letter (A4 or Lette is better), to make this paper airplane. The paper airplane that I played with as a child, a sport that can be carried out with a piece of paper, has gradually evolved into a competitive event, and there are also special competitions.

From November 8th to 10th, the 2018 National Paper Airplane Carnival and the finals of the "Flying Dreams" National Youth Paper Airplane Communication Competition, sponsored by the Air Traffic Management Center of the General Administration of Sports of the People's Republic of China and the China Aviation Association, undertaken by the Hangzhou Model Radio Orienteering Association, and implemented by the Zhejiang Zhejiang Tourism and Cultural Exhibition, were held in Hengdian Film and Television City, Zhejiang.

The steps for an origami airplane are as follows:

1. Prepare a piece of paper, if it is too big, cut it in half, and the paper airplane can fly far away.

2. Fold the paper in half, and then fold one corner in half. Fold the corner in half upwards.

3. Fold the excess part down. Fold it up and down again.

4. Then the other side is folded, and after both sides are folded, open the paper airplane, and you can fly with a sigh.

A paper airplane is a toy airplane made of paper. As long as it is a paper airplane, it can be called a paper airplane. Origami airplane It is the most common form of origami handicraft in aviation, which belongs to a branch of origami handicraft and also belongs to a type of paper airplane.

Since it is one of the easiest types of origami to master, it is loved by beginners and even experts.

The flight principle of paper airplanes: The flight of paper airplanes is formed by the interaction of two forces: gravity and lift. The weight of the paper airplane itself pulls the fuselage downward, and the wings grab the air, causing the paper airplane to float in the air.

The two forces of one up and down, coupled with the power of the thrower to help the paper airplane glide forward, produce inertial motion and slide out of the trend, and the balance of the three forces can fly in a beautiful posture.

The real aircraft is affected by gravity, lift, thrust, and drag, gravity refers to gravity, thrust refers to the thrust of the air flow generated by the turbine of the aircraft, and drag refers to the force of the air that affects the flight of the aircraft. So, when the thrust and lift generated by the plane's turbines is greater than the Earth's gravity and drag, the plane can soar in the sky.

The paper airplane is made as follows:1. First, fold a rectangular piece of origami in half along the midline, as shown in the figure below.

2. Then fold the two sides into a triangle in the middle, as shown in the figure below.

3. Then fold the triangle back, as shown in the figure below.

4. Then fold both sides to the middle, as shown in the figure below.

5. Then fold the top corner up, as shown in the figure below.

6. Then fold in half along the midline, as shown in the figure below.

7. Then fold the two sides in half again in half, as shown in the figure below.

8. Such a small plane is folded, I hope you can like it.

That's how paper airplanes are made.

The origin of paper airplanes1. It is speculated that paper airplanes originated in China, and the people who invented paper airplanes are no longer available, but in view of the fact that paper was invented by the Chinese, and the Chinese also used paper to fly kites, it is generally believed that paper airplanes also originated in China. However, no academics have yet verified the specific origin of paper airplanes. The ancients said that the paper kite was 2,000 years old, and I don't know if there was an occasional time when it did not refer to a kite but to a paper airplane, after all, there were no airplanes at that time, and the folded liquid contained it could only be named after a bird.

2. Of course, the veritable paper airplane was born after the birth of the airplane, and the earliest paper airplane that can be traced back to the era was from 1908 to 1909, that is, five or six years after the Wright brothers made the airplane. However, it is the one that is really well documented in 1930, when John K. Northrop (one of the founders of Lockheed) folded out to study the principle of airplane flight.

In the year, the DC03 paper airplane was born, and its makers declared it to be the best paper airplane in the world. The DC03 has a huge glider and a tail that is probably unique among all paper airplanes. However, in the opinion of Ken Blackboone, the world record holder in the paper airplane competition, the tail wing is unnecessary.

In 1998, Ken Blackburn set a world record for seconds in the air for a paper airplane, which has not been broken to this day.

One of the <> best paper airplane tutorials is the Fly paper airplane, a design made by John Collins, who is considered one of the best paper airplane builders in the world.

Here are the steps to make a fly paper airplane:

Fold an A4-sized piece of paper in half and cut off the left and right corners.

Fold the paper in half again, align the edges with light pressure marks, and make a plan.

Fold each corner towards the centerline according to the trajectory that was previously cut out against the edge.

The creases on both sides are folded inward along the axis of symmetry, merging the two basal cluster scattered triangles.

Flip the whole piece down so that the bottom is completely smooth and fold a certain number of oyster folds inward.

Align the tail of the strip of paper with itself and fold it upwards, then let the paper overlap each other and orient it along the oyster folds. to make a paper airplane called a fly.

Keep in mind that making a paper airplane requires meticulous and patient manual work, and it takes many attempts and adjustments to get the best results.

Tools Raw material: square colored paper.

1. Prepare a square of colored paper.

2. Fold the two sides of the square colored paper in half, and then come.

3. Fold both sides in half along the crease.

<>5. Fold both sides in half along the crease.

6. After that, fold the figure under the crease to the top.

7. Fold the upper figure down along the crease, and the back figure hail also folds down, tidy it up, so that the paper airplane will be folded.

Toys made of paper are thought to have originated in China 2,000 years ago, when kites were a popular pastime. But it's not the same compared to Wano paper airplanes. The earliest paper airplanes dating back to the past were made in the West in 1909.

However, the most accepted method of production today was made by John K. Northrop (one of the founders of Lockheed) in 1930. Northrop used paper airplanes to do simulation tests to discover the flight mechanism of real airplanes.

The specific operation steps of paper airplanes are as follows:Tool: Paper. 1. First fold the paper in half along the middle line, and continue to fold the two sides along the middle line.

2. Align the vertices on both sides along the previous creases, turn them over, and fold the two corners in half along the midline.

3. Align the corners of the top along the bottom line, then turn over and align the corners of both ends towards the midline.

4. Turn it over again, spread the top corner and align it downward.

5. After that, the two sides are folded down and the wings are folded out, so that a good-looking paper airplane can be done.