What if you can t learn guitar tuning?

Tuning mainly depends on two points, one is absolute tone, absolute tone can allow you to determine a pitch out of thin air, but few people's absolute tone is accurate, most people still need to go through a measurement device, or a reference.

The second is the sense of tone in a broad sense, which most people have, after determining the pitch of the 6 strings, the pitch of the other five strings can be roughly determined through the pitch relationship, but although everyone has the sense of tone, but the sense of tone is uneven, not everyone can tune it by listening alone, at this time there are two main methods, one is to look at the resonance of the same tone to determine whether it is accurate, and the other is the tuner.

That's it.

For hand tuning: the thinnest is one string, and the thickest is six.

After setting the first string, when the second string is tuned, press and hold the 5th fret on the 2nd string, and the sound that pops up is the same as the empty string of the 1st string, and when the 3rd string is tuned.

Press and hold the 4th fret on the 3rd string, and the sound that pops up is the same as the open string note on the 2nd string.

Tune in to the 4th key.

Press and hold the 5th fret on the 4th string, and the sound that plays is the same as when the 3rd string is empty.

When the 5th string is tuned.

Press and hold the 5th fret on the 5th string, and the sound that plays is the same as the open string of the 4th string, when the 6th string is tuned.

Press and hold the 5th fret on the 6th string, and the sound that pops up is the same as the open string note on the 5th string.

The most practical thing is to go to the piano store to buy an electronic tuner, which is only thirty or fifty yuan.

Pro, 1, first of all, first use your left hand to hold down the second string 5 fret. 2. Then, after holding down, pluck the first string and the second string at the same time, if two tones appear, it means that the tone is inaccurate, and you need to twist the tuning until the tone of the two strings is consistent. 3. Then use your left hand to hold down the 3-string 4-fret.

4. After staying, pluck the second string and the third string at the same time, and the tuning effect also needs to achieve the same tone of the sound produced by the two strings at the same time. 5. Then use your left hand to hold down the 4-string 5th fret. 6. After holding down, pluck the third string and the fourth string at the same time, and the tuning effect is the same as described above, and the tone should be consistent.

7. Then use your left hand to hold down the 5th fret of the five strings. 8. After holding down, pluck the fourth string and the fifth string at the same time, and the tuning effect is to achieve the same tone. 9. Finally, hold down the six-string 5-fret with your left hand.

10. After holding down, pluck the fifth and sixth strings at the same time, and the tuning effect should be the same as the previous one, so that the two strings can pluck out the same tone at the same time, so that the whole tuning is over.

Kiss! Hello, happy to answer your <>

The method of tuning the pro-guitar without a tuner is as follows: 1. Listen to the **A tone, pick up the **earpiece or press the hands-free button, and the busy sound you hear is an international standard A tone.

Tune the fifth string A accordingly, and then tune the other strings according to the fifth string A. 2. Listen to the beat to play the two common tones on different strings at the same time, if the sound is like a wave, that is, there is a beat, then it means that one of the strings is definitely not accurate, and it needs to be adjusted again. Because if the two frequencies are exactly the same, after the two tones are synthesized, the amplitude superposition of the sound waves is completely harmonious, and there will be no beats.

Only when there is a difference in frequency, will there be staggered superposition, and there will be a phenomenon of uneven strength and weakness. 3. Tuning the strings with the six-tone flute is one of the easiest methods for beginners, the six-tone flute is specially designed for guitar tuning, and its six tones correspond to the six strings of the guitar in pitch and arrangement order, so the tuning is very simple, as long as you blow a flute, remember its pitch, and adjust the pitch of the corresponding string to be the same as it. Tune the six strings accordingly.

4. Look at the string method, find out the position of the empty string sound of the next string you want to tune on the string that has been tuned, play it, keep its sound, and then adjust the empty string until it resonates. Further, you can carefully observe the resonance: if the string is vibrating, decaying quickly, and vibrating again, it means that there is a beat note, which is not yet very accurate; If it slowly decays with the original sound, it means that the two tones are very consistent, and the tuning is very accurate.5 The monophonic flute is a suitable tool for all instruments, including the guitar.

A set of monophonic flutes is usually a complete set of natural scales, but we only need to choose one of the flutes, so it is very convenient to carry around. As for which flute to choose, it is completely up to you, but it is generally one of the six notes of the guitar string: e, a, d, g, b, and e.

Hope mine can help you <>

Do you have any other questions?

1. First of all, clip the tuner to the headstock, then adjust the mode button of the tuner, adjust to the guitar mode (some tuners will write the initial letter G) and start tuning (take tuning 6 strings as an example).

2. Start to pluck the 6 strings, and the standard tone of the 6 strings is E, then the pointer points to E. If the strings are too tight or too loose, the pointer will not point to the e midline. Before the middle line is reached, the strings are too loose, and then tighten the knob; Crossing the middle line means that the strings are too tight, and then loosen the knob.

3. When the tightness is just right, the pointer points to the middle line. The background color of the tuner also changes, indicating that the 6-string tuning is complete.

4. Tune the 6 strings according to the standard of 1e, 2b, 3g, 4d, 5a, and 6e.

1. Take the first empty string as the reference tone to determine the reference tone;

2. Adjust the pitch of the second string so that the fifth frets of the second string are the same as the pitch of the first empty string;

3. Adjust the pitch of the third string so that the pitch of the fourth fret of the third string is the same as the pitch of the second string empty string;

4. Adjust the pitch of the fourth string, so that the pitch of the fifth fret of the fourth string is the same as that of the third empty string;

5. Adjust the pitch of the fifth string so that the pitch of the fifth fret of the fifth string is the same as the pitch of the empty string of the fourth string;

6. Adjust the pitch of the sixth string so that the pitch of the fifth fret of the sixth string is the same as that of the empty string of the fifth string;

7. Use the tuning software to put the mobile phone next to the guitar and play the guitar strings in turn, and the software will bury the reminder when the tune is on;

8. Use the tuner, clip the tuner to the headstock, play the guitar strings in turn, and the tuner will turn green when you play on time.

1. [Essential knowledge of tuning].

The following notation corresponds to the solfège and the note name, and the tone name is displayed on the tuning table when tuning.

Short spectrum: 1 2 3 4 5 6 7

Roll call: Do re mi fa sol la si <>

Sound name: c d e f g a b

The six strings of the guitar are 1 to 6 strings from the thinnest to the thickest.

When tuning. The numbers on the left of 1e, 2b, 3g, 4d, 5a, and 6e represent the strings of the guitar, 1, 2, 3, 4, 5, 6.

The English on the right represents the sound names of Ji Blind Zeliang and his 6 empty strings.

2. [Start tuning].

The first method: tuner.

First of all, clip the tuner to the headstock, then adjust the mode button of the tuner, adjust to the guitar mode (some tuners will write the initial letter G) below and start tuning (take tuning 6 strings as an example) Start plucking 6 strings, the standard tone of 6 strings is E, then the grinding pointer points to E shall prevail,

Tuning should be carried out from the 6th string, the 6th string is the thickest, and when tuning, it is not easy to break the string and go out of tune.

If you start tuning from 1 string, it is easy to break the string.

Tuning can be done in 4 ways.

1. Tuner tuning.

3. Pitch reference tuning.

4. Resonance tuning.

The tuner has multi-instrument adjustment options.

1. Tuner tuning operation.

C means all string instrument tuning, and G means guitar tuning.

b is for bass tuning.

v denotes violin tuning.

UC means Filial Piety Kerry.

Guitar tuning select to G option. It is then clamped to the headstock with the screen facing itself for easy observation of the dynamics.

Starting from the 6th string, when the 6th string is plucked, the screen will display the 6e, indicating the 6-string E tone and so on.

When the needle in the screen jumps to the left of the screen, it means that the tone is low, and the string knob should be adjusted to move the needle to the middle, when the screen displays the corresponding string and name, and displays green, it means OK.

When the name displayed on the screen does not match the string tone, or when the screen is displayed on the screen, the tone may be low, and the string needs to be adjusted to the screen display.

When tuning, pay attention to plucking the strings and tuning the knobs at the same time, and the pitch from bass to treble is :

For example, if the 6-string tone is e, when the f is displayed, it means that the tone is too high.

When D is displayed, it means that the tone is too low.

The sound of the mobile phone is similar to that of the tuner, and you need to follow the on-screen prompts.

3. The pitch refers to the tuning operation.

A pitched guitar is used as a reference, and the pitch of 1:1 is tuned with reference. When the tone of the guitar is exactly the same as that of the reference guitar.

4. Resonance tuning operation.

Take the empty string of a certain string as a reference and tune it according to the principle of resonance.

6 strings and 5 frets, when the pitch of 5 strings and 0 frets is exactly the same, it means OK. Then tune the strings in turn with reference to the freshly tuned strings.