The wood grain of the two sides of the all solid wood dining table is different, is it all solid woo

1. Look at the wood grain and scars.

Regarding the solid wood dining table, if the material is better, then the wood grain and scar knot are relatively neat, and the front and back of the dining table should be in the same position regarding the wood grain and scar. If the wood grain and the scar knot are not in the same position, then the so-called solid wood furniture purchased by the consumer is likely to be fake.

2. Look at the quality of the material.

Regarding the quality of the solid wood dining table, in addition to looking at the brand and **, we must also learn to look at the material of the solid wood dining table, if the material is relatively good, then even if it is more expensive in terms of sales, I believe that consumers are still willing to buy, but on the contrary, if the material is not very stable, consumers need to be cautious in terms of ****.

3. Look at the brand and **.

When buying a solid wood dining table, it is not just based on the material to judge, for example, if consumers recognize the dining table of overseas well-known brands, then even if it is the same material used as other domestic brand dining tables, there will be a big difference in **, which is the brand value and since consumers have chosen, they must pay for this brand.

4. Look at the moisture content of the wood.

For the layman, the moisture content of wood may not be well understood, and of course it is not known what effect the moisture content has on wood. If the moisture content of the solid wood dining table reaches a certain balance and meets the national standards, then the solid wood dining table made of this kind of wood will not crack or break during use.

5. Whether the wood is defective.

It is also a wood material, but if the material is defective, then the sales ** must not be positioned too high. Therefore, when consumers buy solid wood dining chairs, they should pay attention to see if the wood is defective, and if there are defects, they can ask the manufacturer to lower the positioning of this solid wood dining table.

If the finger joints are different, it is likely to be two layers combined, with a layer of solid wood spliced on the surface and MDF veneer below.

Hello, maybe the plate is thick, and the pattern on both sides will be a little different. Or it's a veneer.

Jiangnan can pick lotus, lotus leaves He Tiantian.

Taking chairs and tables as examples, many furniture designs: the edges and feet are solid wood, while the table top and table top (except for the four frames are solid wood) are pressed synthetic materials.

To identify whether it is all solid wood, 1It depends on the direction of the wood grain of the seat panel of the chair and the panel of the table: all the wood grain (or the board has no wood grain at all), like a whole wide board; 2.

The shape and direction of the wood grain of the same furniture and the same part in the shopping mall are exactly the same; 3.The panels on both sides of the wardrobe and the door panels are all wood grain (or no wood grain), and they look like a whole wide board, but the inside is also painted. These are a mix of solid wood and synthetics, rather than real solid wood.

Solid wood furniture: Take the office desktop as an example, assuming that the size is 120cm 60cm, first of all, the 60 cm width of the desktop is not possible to be made of a whole piece of solid wood (because the current width of a single board is more than 25cm is rare, even if there is, it is not expensive) but by a number of solid wood splicing, which is the normal practice of solid wood furniture.

Consumers can identify from the wood grain of these boards: although they are painted, they can still distinguish the width of the wood from the wood grain of the board: the edge of the wood grain between the wood grain splices is not connected, and it can be identified from the edge of the wood grain that is spliced by several wood boards.

If it is a wardrobe, open the cabinet door to see the sides and the back of the door at a glance. This is a feature of solid wood panels. At the same time, many manufacturers do not paint the bottom of solid wood furniture, the inside of the cabinet, and the back of the cabinet door, so that consumers can distinguish.

As long as all the wood used is solid wood, it can be called all solid wood furniture, including wooden parts are also solid wood, but all solid wood furniture does not stipulate that the same wood species must be used.

Sawing open to see the cross-section, haha, this is a theoretical explanation, in fact, it is also to look at the cross-section, to see if the corners or holes can expose the cross-section, some are MDF veneer, some are made of cheap solid wood wood, expensive wood veneer, which saves a lot of costs, but it is said that it is selling the material of expensive wood. MDF is not textured, this is easy to distinguish, if it is also solid wood inside, it must be cheaper than the veneer kind of wood, otherwise there is no need to go to such great trouble to paste the veneer on the surface. If it is a relatively large display, the surface of the veneer may be at least one piece of veneer or more spliced, and a closer look can find the splicing seam, because the general veneer may not be so large.

If you look closely, you will find that the wood grain at the seam is discontinuous, disconnected, and cannot be connected. It is also necessary to paste the wood grain paper on the MDF, because the wood grain paper is printed, so the wood grain will be repeated, and there will not be a touch of the same two leaves in the world. There are many routines for merchants.,The second is the sandwich material.,And it's the kind with three layers.,If you don't want to be deceived, do more homework.。。。

These are not as good as solid wood. But it's also good. Easy to clean.

"Solid wood furniture" refers to "furniture whose base material is made of solid sawn wood or solid wood panels, and the surface is not covered". "Solid wood veneer furniture" refers to "furniture made of solid sawn wood or solid wood planks and covered with solid wood veneer or thin wood (veneer) on the surface".

All solid wood furniture is better than veneer. Generally, veneer furniture is only a layer of veneer on the surface, which is wood veneer. There used to be stickers. Most of them are MDF veneers.

There is a big difference, one is made of solid wood and painted on it, and the other is made of compressed board with paper pasted on it.

At a glance, you will know that the inconsistency is to stick the leather b Look at the appearance pattern, remember, don't bring a wooden word to say that you are not a board type, but it is greatly discounted 1, don't be fooled: a look at the internal and external texture, good wood is always exposed, I don't understand the difference between furniture, leather solid wood furniture and pure solid wood furniture is as follows, open the cabinet door to see if the internal and external patterns are consistent! , pay attention to the main materials and auxiliary materials to ask clearly:

panel furniture, pasted party. Note that solid wood veneer furniture, veneer is unconcealable e Remember, panel furniture is very differentiated, no joint is pasted leather c Look at the neatness of the appearance pattern, the merchant said, the board contains wood, unless it is broken wood, pure solid wood furniture can not be very complete pattern, if the merchant says that he is solid wood pressed on a layer of solid wood veneer, the one who answered first, that is also called solid wood, pure fart. 4. The board type is the board type, in layman's terms, there are three kinds of furniture, no need to press another layer, pure solid wood furniture, remember, there is no board and wood combination!

There is no joint, the skin is very complete d Ask the merchant what wood, which is equal to the skin: the combination of wood and wood.

Pure solid wood furniture and solid wood veneer furniture are distinguished.

1. The difference between the two.

There are many modern panel furniture finishing materials, among which veneer and stickers are very commonly used, but the grade is completely different. Veneer furniture is rich in natural texture, beautiful and durable, but relatively high, while sticker furniture is easy to wear, afraid of water, and unbearable to collide, but it is cheap and belongs to popular products. Some furniture varieties with little wear and tear and not close to water sources are currently dominated by stickers, such as shoe cabinets, bookcases, etc.

2. The stickers are different.

When customers visit the furniture store, they will see instructions such as "walnut base cabinet", "cherry wood coffee table", "beech dining chair" and so on. At this time, it is very important to figure out whether it is solid wood, veneer or sticker. Solid wood and veneer can be called "cherry wood furniture", but stickers can only be called "cherry wood grain furniture", otherwise it is a mixed move.

3. Solid wood, wood grain, and wood rays are clearly visible.

More or less there should be some natural blemishes (knots, spots, etc., black lines, etc.). For the same piece of solid wood, whether it is a plank or a strip, the natural connection between the longitudinal section and the cross-section should be clearly visible in the wood grain at the interface between the two intersections. Because the veneer has a certain thickness (left and right), when making furniture, when encountering two adjacent interfaces, they usually do not turn, but stick one piece each, so the wood grain at the two interfaces should not be connected.

4. Stickers, wood grains, and wood rays are clearly visible.

Even imported high-grade paper can be imitated even if it has wood defects, but it is still different from natural veneer and looks fake. Sticker furniture is prone to revealing flaws in the corners. In addition, the thickness of the wood grain paper is very small (, it will be directly wrapped at the junction of the two planes, resulting in the wood grain of the two interfaces being connected (usually longitudinal sections).

a. Log veneer: The color of common veneer is from light to dark, including cherry, maple, white beech, red beech, ash, white oak, red oak, teak, yellow pear, safflower pear, walnut, white shadow wood, red shadow wood, red sandalwood, ebony and so on. In the production, the solid wood is cut into wood chips about 2 mm thick, specially adhered to the surface of the furniture, and then lacquered, ultraviolet baking, characterized by smooth touch, with fingers to buckle the board has a thick feeling, the surface of the wood grain is clear but irregular, in the corner of the plate can be faintly seen about 1 mm of wood veneer, this kind of furniture is veneer furniture in the upper grade, the general price is slightly expensive.

b. Log composite veneer: Log veneer of different colors is stacked layer by layer, glued together by resin and high pressure to form a wood square, and then slice from the section to form a new type of veneer with different colors and different wood species.

c. Log color leather: This kind of furniture is relatively cheap, and the general price is 2 3 to 1 2 of wood veneer, but it is easy to scratch and roll up veneer in use.