-
Anonymous users2024-02-08What is the cause of the unevenness on the surface of the car paint film? There are two reasons, one is that the iron sheet inside is used for defective goods, and it is rusty. The other is the unqualified car paint, and the first one may be larger.
If you don't get the paint off, you still don't want to deal with it, and if you deal with it, you have to remove the pimple piece and spray it anew.
-
Anonymous users2024-02-071. The surface dries quickly, and the coating film dries unevenly;
2. If it is too thick at one time, only the surface is rapidly dried, and the inside cannot be dried at the same time, and the lower layer is loose and the upper layer is tight;
3. The lower coating is not completely dry, that is, the upper layer is coated;
4. The upper and lower coatings are not matched;
5. The primer is not completely dried, and the diluent dissolution of the topcoat is too strong, which makes the primer swell;
6. The amount of curing agent added is too small;
-
Anonymous users2024-02-06The main reasons; Improper spraying method, the spray gun is too far from the surface of the substrate, the pressure of the compressed air is improper, and the nozzle is not properly adjusted.
The paint film is too thick or too thin.
The paint is mixed unevenly, the viscosity is not appropriate, the thinner.
The model is not right or the quality is too poor.
-
Anonymous users2024-02-05This is the car in the car when the car into the impurities, belongs to the quality of the problem, you can find the car beauty shop that gave you the car clothing at that time to re-paste you, or refund you money.
-
Anonymous users2024-02-041. Due to the improper construction of primer and putty, 2. Insufficient inferior thinner or diluent, and too high compressed air pressure, 3. The paint film is covered on the gap or dead corner, so that a gap is formed under the paint film.
-
Anonymous users2024-02-03This should be the bottom is not done, it is sprayed if it is not dry, and there is gas in it after a long time or the temperature rises, and it swells out to form a granular bulge, and it can only be re-polished and painted.
Hope this helps, please!!
-
Anonymous users2024-02-02There are two reasons, one is that the iron sheet inside is used for defective goods, and it is rusty. The other is the unqualified car paint, and the first one may be larger.
-
Anonymous users2024-02-01You need to go to the 4S store to negotiate, if it is not very serious, just throw the light on the new car. However, if it is already a product quality problem, the seller needs to propose a solution.
-
Anonymous users2024-01-31I didn't spray it well, but it took too long, so let the 4S store deal with it simply.
-
Anonymous users2024-01-30Summary. Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces.
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
The place where the pimple rises is on the fuel tank cap.
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
Yes, you need to apply first, change the color after passing, change the color and then go to the vehicle management office to apply for the record and replace the driving license at the same time, now you can change the color first, and apply for the record at the vehicle management office within ten days to change the driving license at the same time, but some colors are not allowed, and it is best to understand before changing the color.
It can be restored by waxing, polishing, glazing, coating, and crystal plating, all of which have their own advantages and disadvantages, and car owners can choose according to their own needs. Glazing is the most ideal of these 5 methods, and its principle is to apply enamel on the body to fill in the cracks on the paint surface and restore the luster of the paint. >>>More
Here's how to deal with scratches on car paint:1. Lacquer pen repair method: paint pen repair method with a similar color paint pen painted on the scratch area, this method is simple but the paint adhesion at the repair place is not enough, easy to peel off and difficult to last. >>>More
No, polishing will make the paint thinner, but that doesn't mean you can't polish the paint at all. A small amount of polishing is what the car paint can withstand, and polishing is a method of car paint care. >>>More
Hello, cracks in the car paint generally appear on the repaired car paint, there are many reasons for the problem, in order to get your car to the repair shop as soon as possible to repair, I hope it will help you.