-
Anonymous users2024-02-08You can use a laptop hard drive, but in fact, the so-called anti-shock technology is to have a sensor inside that stops the hard drive when it detects vibration.
-
Anonymous users2024-02-07Hard disk anti-vibration technology is a component of APS technology.
ASP hard drive protection technology is composed of an accelerometer sensor embedded in the motherboard and vibration** management software pre-installed in the system. Through the virtual monitoring of the angle of the ThinkPad itself, careful vibration and impact (i.e., the monitoring of horizontal and vertical acceleration changes), it is decided whether to retract the hard disk head from the working state to the head stop area, so as to reduce the damage to the hard disk and protect the hard disk and the data in the hard disk. The vibration** management software receives the corresponding signal from the accelerometer sensor chip, and determines which ones are harmful to the hard disk and which are regular movements through analysis.
The vibration management software will ignore the regular movement that can not cause damage to the hard disk, and for the movement that can cause damage to the hard disk, the vibration management software will immediately pass the information to the hard disk, so that the head is quickly retracted to the stop area. When the laptop is powered off or the system is booted, the APS function will not be started.
How APS technology works:
When the hard disk of the laptop is working, the head of the hard disk moves above the disk to read the data, and when the impact force is less than 200g within 2 milliseconds, you can generally rely on the shell and shockproof design of the ThinkPad itself to absorb the shock to avoid damage to the hard disk. When the impact force exceeds 200g within 2 milliseconds, the damage will increase with the impact energy.
-
Anonymous users2024-02-061. Hard disk is a very sophisticated storage device.
2. When the hard disk is read and written, the floating height of the magnetic head on the surface of the platter is only a few microns; Even when not working, the head is in contact with the platter.
3. When the hard disk is working, once a large vibration occurs, it is easy to cause the magnetic head to collide with the data area, resulting in damage to the data area of the platter or scratching the disk, and losing the file data stored in the hard disk.
4. Do not move the computer or mobile hard disk when working or before the spindle motor is stopped after shutting down, so as to avoid the impact between the magnetic head and the platter and scratch the magnetic layer on the surface of the platter.
5. In addition, you should also be extra careful during the installation and removal of the hard disk to prevent excessive shaking or violent collision with the iron plate of the chassis.
-
Anonymous users2024-02-05If it is shaken, the disk head, the disk surface of the hard disk will rub and touch, and it will be damaged.
-
Anonymous users2024-02-04500g shockproof hard drive. Pros and cons:
Hello! Pros:1
Very good shockproof performance: The 500g shockproof hard drive has good shockproof performance, which can provide strong protection for the data in the hard drive and reduce the possibility of hard drive damage. 2.
Fast Transfer: The 500G shockproof hard drive adopts high-speed transmission technology, which can provide faster read and write speeds, which can effectively improve work efficiency. 3.
Large capacity: 500G shockproof hard disk has a large capacity, which can meet the user's storage needs for a large amount of data, saving users' time and space. Cons:
1.**Higher: The **500g shockproof hard drive** is much higher than the average ordinary hard drive, and it is not very economical.
2.High power consumption: 500G shockproof hard drives have high power consumption, which may increase electricity bills when used for a long time.
The hard disk head is the key component of the hard disk to read the data, its main role is to convert the magnetic information stored on the hard disk platter into electrical signals to transmit outward, and its working principle is to use the principle that the resistance value of special materials will change with the magnetic field to read and write the data on the platter, the quality of the head largely determines the storage density of the hard disk platter. At present, GMR (Giant) is more commonly used >>>More
Do you use QQ? QQ has a free 16MB network hard drive.
I'm using a 100mb vdisk >>>More
Most of your hard drive has a broken track, especially when playing games or running large software, the hard drive can't read data. But it also has to be forcibly read, the head makes a sound when it seeks back and forth on the disk, and the CPU is delayed, causing the system to crash. You can use the built-in disk repair function of Windows to repair it, but this can only repair the physical track of the hard disk, not in the real sense. >>>More
It is made of sheepskin, and when you store something, it is an automatic needle engraved on the sheepskin, which is how the hard disk works.
On the basis of traditional mobile hard disks, smart mobile hard disks can emit Wi-Fi, and mobile phones and tablets can read and write hard disk data through Wi-Fi. However, the reason why it's really smart is that it has an embedded CPU that can replace the computer itself to connect to the Internet and automatically interact with various cloud services, such as cloud offline** and so on.