The hard disk light flashes wildly at every turn, why does the hard disk light flash?

Most of your hard drive has a broken track, especially when playing games or running large software, the hard drive can't read data. But it also has to be forcibly read, the head makes a sound when it seeks back and forth on the disk, and the CPU is delayed, causing the system to crash. You can use the built-in disk repair function of Windows to repair it, but this can only repair the physical track of the hard disk, not in the real sense.

It is recommended that you back up your important data as soon as possible and be ready to replace the hard drive. Data on your hard drive can be lost at any time.

Description: The Windows Repair feature is in"Get started"-"Procedure-"System tools"Middle.

Some versions have been slightly changed.

Hope it helps!

This must be a hard drive to hang.。。。

When the disk bad sector to a certain extent,The response speed of the hard disk will decrease,In addition, it is estimated that it is an old hard disk,40G and 160G have the same number of bad sectors,The proportion is different。

The landlord's hard disk is estimated to be 40g or 80g, and there are many things, and the disk is almost full.

That's why this situation happened, listen to me, while it's not completely broken, buy a new hard drive quickly, and copy the important things, otherwise it will be broken by then, and there will be no tears to cry

It's been a long time. Defragment the disk under it.

It should be a lot better.

It's that you have too many bits and pieces on your hard drive. The read speed is slower.

Sometimes, there is also a freeze-frame phenomenon.

If you've tried it all.

Most of the time there is a bad road. Let's get the hard drive repaired.

It may be too much to use Kingsoft Cleanup Expert to clean up one of your programs, and it is best to do a defragmentation to kill a rogue software. In this way, even if it is better, if it is still so slow after reinstalling it once, your computer is really going to be replaced (if you rule out hardware problems).

The hard drive light stays on because the hard drive is reading a lot of data.

It is recommended to run disk defragmentation, if it still doesn't work, there may be bad sectors.

Bad sectors may be logical bad sectors Check with professional software.

The sound card is fine, if it doesn't work, reinstall it! Someone must be browsing your computer.

What system do you have? 2000？xp？Right-click on my computer, click on Manage, and then click on Shared Folder to see if there is anything shared.

Take another look at this window, research and research, and see if there are any other users ......On the top floor, you can also change the hard drive.

I agree with 66986809.

It's possible that you've moved the chassis so hard that it's causing physical damage.

It's because of the fragmentation It is recommended to tidy up the precursor of bad sectors in the early stage of the hard disk is also this kind of sound You use HD does not work at all.

The hard drive is old, and it should be replaced with a new one

Clean up the debris, or your hard drive will be flickering in search of data.

See if there are any other big programs running secretly in your Task Manager?

It can't be that the voltage is not enough, right?

Could it be that you got someone into your computer?

It's normal for the hard drive to flicker. No matter how small the program is, as long as it is read and written, it will flash. The power of flash is also related to the software settings of the operating system.

There are also 11th generation Seagate with no firmware issues. The problem is 10 generations.

This is a very normal phenomenon, you said that it does not work is not running other programs, but the operating system and other system programs are still running, it wants to read data from the hard disk, a flash means that your hard disk is working normally, when a large number of data is read, the little red light will always be on.

Check to see if someone is controlling your computer and sharing your files.

The hard disk light keeps flashing, indicating that the hard disk has been reading and writing operations. Reason:

1. The memory is small, because the memory is too small, the hard disk has to keep entering the data exchange. So the hard drive keeps flashing.

2. Infected with the virus, because the virus is infected, the virus is running, it is constantly infected, so it keeps reading and writing.

3. The Internet is non-stop, and temporary files are constantly processed, which will also cause the hard disk to read and write.

Normal light and no flashing means that the power is on.

Bright and flashing indicates that the data is being read or written.

The hard disk light keeps flashing, indicating that the hard disk has been reading or trying to force the data to be read for unknown reasons, and according to the existing conditions, it is judged that the power supply has burned and affected the hard disk.

First of all, quickly back up your important data, and then use hard drive detection software to check the hard drive to see if there are any problems. If there is no problem, just use it. Because the hard drive usually doesn't break down suddenly, it's not a big problem, and I'll talk about it when something is abnormal.

Generally, hard disk damage is motor failure, 0 track damage, bad track these kinds of faults, if there is no problem with the track, then pay attention to frequent backup of the main data.

The impact of the power supply burning radio wave on the hardware is different, so it is impossible to determine the specific cause of the fault according to the existing conditions, and if the hard disk motor is impacted by the current, the degree of damage cannot be accurately judged.

So, do what you can do, then back up your data, and then use it with peace of mind. In the future, you can often observe whether the lights of the hard disk have changed.

It should be the reason for the virtual memory of the system, in fact, the landlord is completely worried. The hard disk is just flashing.,It's not normal if it's not flashing.。。。

When I watch a movie, the hard drive light flashes.

It's because although it's just listening to songs.

But the system is still running.

There is also software running.

A few minutes, it may be poisoned, generally from boot to the end of the program loading up to two or three minutes.

The antivirus software will scan your boot items.

It's normal for the hard drive light to flash.

About the reason why the hard drive light keeps flashing.

I don't know if my friends feel this way, many times you will see the hard disk indicator on the case is constantly flashing, green or red, and at this time it seems that there is no large application running, so what program is frequently reading and writing the hard disk in the background?

Right-click on an empty space in the taskbar and select Task Manager from the shortcut menu, which will open the Task Manager window and switch to the Processes tab, but you can't directly see the read-write disk'information, we need to select "Select Columns" from the "View" menu, then the "Select Process Page Columns" dialog box will be opened, here check the items related to "Io" in turn: io read, io write, io other, io read bytes, i o write bytes, i o other bytes, etc., and return to the "Task Manager" window after confirmation.

Now, we can see the currently running program from the window shown in Figure 2, as well as the amount of data for the various process read and write operations, and if we sort an item appropriately, combined with the description in the "Description" column, we can understand which applications or background services are frequently reading and writing disks in the background, and then determine if there are suspicious viruses or Trojans in it. ;