ghost installation system: After entering the installation interface, An1 appears with a black scree

If there is a problem with the system disk, try again if you change the disk.

What is the content in English?

After win7 installs the system, there may be a black screen and display English letters, which is generally caused by the following reasons:1System installation errors, loss or corruption of some system files; 2.

The graphics card driver is incompatible or corrupted; 3.The boot boot of the system is corrupted by a virus; 4.Hardware failures, such as memory or hard drives; 5.

Reinstall the system and make sure there are no errors during the installation process; 2.Update the graphics card drivers, or uninstall the current driver and try to install the appropriate driver for your computer model; 3.Enter safe mode and scan the system with anti-virus software; 4.

Check if there is a problem with the hardware, you can airlift to try to replace the memory or hard disk, etc.; Ant Void 5Check if there is a problem with the monitor or signal cable, and check whether the interface is securely connected. If none of the above methods work, it is recommended to consult relevant technicians or send the computer to a professional after-sales service center for repair.

After the system reboots after installing ghost, there are two causes and solutions for the black screen:

Second: the ghost installation is successful, indicating that the ghost file itself is not damaged, but when the system is encapsulated, the built-in driver may not be compatible well, or the optimization and simplification are excessive; Most of them are the first kind of driver compatibility issues;

An effective solution is to cancel the installation of the driver immediately when you see this interface of driver installation, or click with the mouse to exit; After waiting for the system to be installed successfully, use the driver wizard or Master Lu to reinstall the driver;

Hello, I'm trying to install it from scratch, if it can't get up, it may be that the machine is broken.

There's nothing on the screen.

Is it to use PQ to divide the area?

If yes, go into PQ again to see if the C drive is set to function.

Summary. 1. First, we turn on our computer. As soon as we turn it on, the computer will have a black screen and we press del on the keyboard.

Installed win7 computer black screen appears in English.

Hello dear, it's a pleasure to be able to serve you <>

The solution to the black screen of the win7 computer is as follows:

1. First, we turn on our computer. As soon as we turn it on, the computer will have a black screen and we press del on the keyboard.

2. Then, there will be a white screen and blue English letters. At this time, let's not panic and press enter.

3. After pressing the Enter key, we use the mouse to select the option 1 on the screen, and then we can proceed to the next step.

4. Finally, the system will automatically pop up a blue border, and the computer will not have a black screen after we select yes.

If you find this too much trouble, you can take it to a repair shop to repair <>

Dear, if my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Do you know what to do if the computer boots up with a black screen in English?

I installed the windows7 ultimate version, and the system registry was repeatedly lost or damaged during the installation process, and then the computer appeared a bunch of English garbled characters!! Ask the gods for help!!

There is a problem with the file of the grub menu (if it is grub2, it is missing, I have not used other versions of grub).

Hello, the system you are installing, the boot file is not working, or lost, this kind of failure will occur, there are several possible failures, 1, the system installation did not format the C disk, everywhere the system disk garbled characters, can not start normally.

2. When the system is installed, the computer driver cannot be installed, or a file of the C disk is incompatible, and the win, system disk cannot be imported, and this kind of failure will occur when all boots are started. And many more and so on.

Solution, it is recommended to install the system from the new, install the PE system with a USB flash drive, and format the two disks of the computer C and D, if there are files in these two disks, it is easy to affect the system installation.

If your computer is installed with Win XP handouts to use the lite version, if your memory is less than 4GB it is recommended to use the Win 7 32 deep version system, if your computer memory is greater than 4GB handouts to install Win7 64-bit ultimate version of the system.

This will allow you to keep your PC configured to the most recent state.

Try to fix it first, and reinstall the system if it doesn't work:

Clause. First, there may be a problem with the system, and possible solutions:

1. Keep clicking the F8 key when you boot up, enter the system operation menu, select "Last correct configuration", restart the computer, and see if it can be solved.

2. Boot up and keep clicking the F8 key, enter the system operation menu, select "Safe Mode", if you can enter successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore Dialog Box" appears, and select "Restore my computer to an earlier time".

In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally. (if any).

3. Install the disc with the system, put it into the optical drive, restart the computer, enter the state of installing the disc system, wait until the boot interface flashes, do not choose to install the system, but choose the repair system, repair the current system (it may run for a long time, 2-4 hours is possible), wait patiently for the repair to be completed, and see if it is. Try to fix it first, and reinstall the system if it doesn't work:

Clause. First, there may be a problem with the system, and possible solutions:

1. Keep clicking the F8 key when you boot up, enter the system operation menu, select "Last correct configuration", restart the computer, and see if it can be solved.

2. Boot up and keep clicking the F8 key, enter the system operation menu, select "Safe Mode", if you can enter successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore Dialog Box" appears, and select "Restore my computer to an earlier time".

In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally. (if any).

3. Use the system to install the CD-ROM disc, put it in the CD-ROM drive, restart the computer, enter the CD-ROM installation system state, wait until the boot interface flashes, do not choose to install the system, but choose the repair system, repair the current system (it may run for a long time, 2-4 hours is possible), wait patiently for the repair to be completed, and see if it can solve the problem.

If the above 3 methods are invalid, you can only reinstall the system.

Put your system in the root directory and make the name shorter.

1: Restart the computer - keep pressing the keyboard "del" key - enter the BIOS - find the keyword "boot" in a row of English and click in - find the keyword "first boot" or "1st boot" in a row of English - press enter - set it to "***" or "cd-rom" - press f10, yes to save and exit. This step is to set up the computer to boot from the optical drive, and the default setting is to boot from a hard disk drive (HDD).

Completing this step is more than half complete, because except for some advanced boards of ASUS Gigabyte that have a Chinese interface, here it is all in English.

2: Insert the disc into the optical drive - restart the computer - enter the disc interface.

3: The disc interface is Chinese, and most of the CD functions are similar. If you only install the system, select the "One-click to install the system to the C drive". Of course, before that, you can select "Divide the hard disk into 4 partitions with one click", but in this case, all files on the hard disk will be lost.

4: After installing the system, you can already enter the operating system, but if there is still a disc in the optical drive, you can't enter it. Refer to the steps in 1 to change "1st boot", which is the first sequential boot item, back to "hdd", which is the hard disk boot.