What should I do if my Changan Suzuki old Alto burns a little engine oil

First, the main reason for burning engine oil.

1. Use engine oil with poor quality or viscosity grade that does not meet the requirements. In addition, too low or too high oil viscosity can lead to poor engine lubrication, increased wear of piston rings and cylinder walls, and reduced sealing performance, resulting in oil burning.

2. The matching gap between the piston ring and the cylinder wall is too large, the piston ring is improperly installed or the sealing is poor, and the oil on the cylinder wall enters the combustion chamber, causing the phenomenon of burning the engine oil; In addition, poor sealing performance of the valve seal, damage to the crankcase forced draft valve (PCV) or crankcase vent blockage can cause excessive pressure in the crankcase to cause the oil to enter the cylinder with the crankcase gas and participate in combustion.

3. Burning engine oil caused by excessive oil filling. When the oil is filled above the center line, the part of the engine lubrication process that passes through splash lubrication will be too much into the combustion chamber due to the high oil pressure.

4. Oil leakage from turbocharger. The turbocharger is mounted at the front of the exhaust pipe and operates at a very high temperature, and the turbine and pump wheels can reach 120,000 revolutions per minute when the engine is running at full load. The turbine shaft has oil-lubricated floating bearings, and the car has one oil passage to the turbocharger.

Oil leaks from pipes or bearings can allow oil to seep from the turbocharger into the exhaust pipe. When the exhaust pipe temperature is high, the oil is baked and discharged into blue smoke.

5. There is leakage in the valve oil seal, which means that the oil leaks into the combustion chamber through the valve oil seal.

Second, the method of preventing the burning of engine oil.

1. Use engine oil that meets the technical requirements of the vehicle. Many car owners never read the vehicle manual, and they don't know what quality and viscosity grade oil their vehicles use for a few years, and there is a lot of arbitrariness in the use of engine oil. When using engine oil, one is to pay attention to the quality index, and the other is to pay attention to the viscosity index.

The quality index refers to the grade above SL as much as possible, and the viscosity index should be strictly in accordance with the provisions of the viscosity index in the automobile manual, and cannot be too low or too high.

2. Avoid frequent rapid acceleration and long-term ultra-high-speed driving. When the engine rotates at ultra-high speed, it is easy to break the lubricating oil film, resulting in poor lubrication and dry grinding of the rotating parts, and when it becomes a regular operation, it will make the engine wear abnormally and burn the oil, therefore, maintaining economic speed is one of the best ways to prevent the phenomenon of burning oil.

3. The oil must meet the specifications when filling. When the oil filling volume exceeds the center line, the repairman should be asked to pump out the excess oil, in addition, the oil volume should be observed before the next day.

4. If you find that the engine oil is burned, go to the maintenance station for inspection as soon as possible. If it is due to engine failure (such as poor piston ring sealing, valve oil seal leakage, cylinder gasket leakage, etc.), you should go to the maintenance station as soon as possible to check and repair the fault as soon as possible.

I leave it on, and check the oil for one week.

1. The average life of the battery is about 3 years, and the battery life of the vehicle is less than 3 years if the vehicle is parked for a long time. If the motor speed is OK when starting, it generally means that there is no big problem with the battery.

2. It is recommended to choose 5w30 engine oil in winter to avoid difficulties in cold start.

3. In addition to the battery oil, it is necessary to do an in-depth maintenance in addition to the battery oil, including: cleaning the throttle valve, cleaning the intake tract and adding a bottle of fuel system cleaning agent.

4. Check if there is a problem with the spark plug.

5. Follow the above steps to eliminate and solve it step by step!

I've also encountered such a problem with you, just change the battery! That's right.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. There are many reasons that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and cause the oil to burn, so that the vehicle appears

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem next to the core. In the past, the problem of burning engine oil could only be solved by dismantling and repairing, but now there is a solution to solving the problem of burning engine oil without dismantling and repairing, which can be understood by taking a look.