Whether street lamp maintenance is high altitude work, and whether street lamp maintenance aerial wo

Street light repairs usually do not require working at height. In general, the maintenance work of street lights can be carried out on the ground without the need for aerial work. Maintenance personnel can use ladders, manhole covers, and other equipment to access street lights for maintenance and replacement work.

However, in some special cases, it may be necessary to work at height. For example, when street lights are located in high places such as viaducts and high-rise buildings, maintenance personnel may need to use equipment such as hanging baskets and scaffolding to carry out high-altitude repairs. In this case, maintenance personnel need to have relevant aerial work skills and safety awareness to ensure their own safety.

When working at height, maintenance personnel need to pay attention to the following:

1.Safety awareness: Maintenance personnel need to maintain a high level of safety awareness at all times, pay attention to the surrounding environment and potential risk factors, and ensure their own safety.

2.Use the right equipment: Maintenance personnel should choose the right equipment for aerial work, such as hanging baskets, scaffolding, etc. These devices need to be inspected and maintained to ensure they are safe and reliable.

3.Wear protective equipment: Maintenance personnel should wear appropriate protective equipment, such as safety helmets, safety belts, etc., when working at height, to prevent accidents.

In general, street light repairs usually do not require working at height, but in some special cases it may be necessary. When working at height, maintenance personnel need to have the relevant skills and safety awareness to ensure their own safety.

No, a work at height permit is required.

Hello, it does not belong to the scope of special equipment management.

Please see the latest Special Equipment Catalogue

Announcement of the General Administration of Quality Supervision, Inspection and Quarantine on Amending the Catalogue of Special Equipment [2014] No. 114 Definition of special motor vehicles and lifting machinery in the field (factory):

Special motor vehicles in the field (factory) refer to special motor vehicles that are only used in specific areas such as factory areas, tourist attractions, and amusement places except for road traffic and agricultural vehicles.

Lifting machinery refers to the mechanical and electrical equipment used for vertical lifting or vertical lifting and horizontal movement of heavy objects, and its scope is specified as a lift with a rated lifting capacity greater than or equal to; Cranes with a rated lifting capacity greater than or equal to 3t (or tower cranes with a rated lifting moment greater than or equal to 40t·m, or loading and unloading bridges with a productivity greater than or equal to 300t h) and a lifting height greater than or equal to 2m; Mechanical parking equipment with more than or equal to 2 floors.

I have also struggled for a long time, and in the previous catalog, there was a basis for high-altitude vehicles: "Regulations on the Safety Supervision of Special Equipment" (Order No. 597 of 2009); Catalogue of Special Equipment (Guo Quality Inspection Pot [2004] No. 31); Supplementary Catalogue of Special Equipment (Guo Qianzha Special [2010] No. 22).

4800 Lift Category 4890 Aerial Work Truck New 2014 No. 114 Special Equipment Catalogue No longer has this equipment, so it is not.

1. The provisions on early retirement for special types of work are: for 10 years of work at high altitude or particularly heavy physical labor, 9 years of work in underground and high temperatures, or 8 years of work harmful to physical health; Men who are at least 55 years old and women who are at least 45 years old can go through the procedures for early retirement.

2. For the high-altitude maintenance electrician you mentioned, it depends on whether the unit is filed with the Labor Bureau, and the type of work for early retirement must be identified by the Labor Bureau and belongs to the scope of early retirement work.

3. If the maintenance electrician type of your unit has not been appraised by labor, although it belongs to the type of high-altitude work, then you do not enjoy the approval conditions for early retirement, so you cannot go through the early retirement procedures.

Summary. Hello, you need a special vehicle operation certificate to drive an aerial work vehicle, and when the street lamp is repaired, take the aerial vehicle to overhaul the street lamp. Driving an aerial work platform is a special vehicle, not a motor vehicle. It is necessary to apply for a special vehicle operation certificate at the local labor or agricultural machinery department.

Do I need any documents to drive an aerial work truck? When the street lamp is repaired, take the high-altitude car to overhaul the street lamp.

Hello, driving a high-altitude work vehicle requires a special vehicle to slow down the operation certificate, street lamp maintenance, take the aerial vehicle to overhaul and grind the street lamp. Driving an aerial work vehicle is a special vehicle, not a motor vehicle. It is necessary to apply for a special vehicle operation certificate at the local labor or agricultural machinery department.

Relevant information: The driver of the aerial work platform must hold a large shirt passenger car driving license, that is, an A1 driver's license. The A1 driver's license is a bus that we can often see in Huaihuai that can take more than 20 people, and passenger cars with a body of more than 6 meters must also use an A1 driver's license.

Street lamp maintenance generally chooses a 10-12 meter high aerial work truck.

6 meters, 8 meters of small street lights, the height is not high, the weight is not very heavy, in the maintenance will generally be put down, about 10 meters of street lights in the maintenance is needed to use engineering vehicles. Street lamps above 15 meters belong to high-pole lights, high-pole lamps can generally be equipped with lifting devices now, and the above light source bracket can be lowered directly during maintenance, and aerial work vehicles are generally not needed.

The height of the street lamp is generally not more than 12 meters, so the 12-meter aerial work vehicle is suitable for maintenance vehicles.

There are two types of 12-meter aerial work trucks: one with folding arm and one with scissors

m folding arm aerial work platform:

12-meter folding aerial work platform **: 10,000.

Chassis: power 85kw115 hp double-row cab, 3360 wheelbase, steel wire tires, oil brakes, five-speed box, front axle 2 tons, rear axle tons, with directional assistance, with exhaust brake, original ABS, original air conditioning, multi-function steering wheel.

Special performance: hydraulic 360 degree full rotation, three-section folding arm, single hydraulic lifting cylinder, with two-way balance valve, with electronically controlled operation lifting arm, four hydraulic cylinders adjustable outriggers with two-way hydraulic lock (outrigger operation is manual operation, can be controlled separately), upper and lower two sets of operating tables, with 1 ton hook, maximum operating height of 12 meters, maximum operating radius of meters, maximum lifting weight of 1 ton. The equipment is compact, rugged, easy and reliable to operate. The unique design of the full-rotation three-section arm hydraulic control system makes the staff operate more smoothly and can send the staff to the working position more safely for maintenance, installation, cleaning, photography, shipbuilding, chemical industry, power repair, pruning, street lamp replacement and other engineering aerial work repair.

m scissor aerial work platform:

Chassis configuration: the use of Jiangling Shunda national five double-row cab, model JX1041TSG25, JX493ZLQ5 115 horsepower diesel engine, with direction assistance, 3360 wheelbase, wire tires, five-speed gearbox, oil brake, optional air conditioning, other according to the national five standard preparation.

Bodywork configuration: 10 meters platform 12 meters working height, with cargo compartment, with hydraulic system and telescopic legs, power unit, can be installed platform electronic control operation.