Lenovo Zhaoyang E43 laptop Fn key, Del key, Y key where is it

Look at your prompt, it should be 1) the current boot disk is not used for booting; 2) The disk used for boot is unreadable. The causes may generally be as follows:

1. The boot disk of the BIOS setting is wrong, and the boot disk is set to a CD, floppy disk or U disk, etc., and it happens that there is a U disk, floppy disk or CD on the computer;

2. The hard disk is not in good contact.

3. The hard disk mode is set incorrectly.

4. Hard disk MBR error.

Of course, it is not excluded that the hard disk may be scrapped, I used to move it when the computer started, and the hard disk was scrapped, no matter how tossing it was.

You can try the following:

1. Check the optical drive, U disk, floppy disk, etc., and take it out if there is any;

2. Enter the BIOS and set the hard disk boot as the first boot disk in the boot item settings, and try to reboot whether it can be booted;

3. Enter the BIOS, modify the hard disk mode, and try to restart it after setting different modes to see if it can start;

4. Disassemble the chassis, unplug the hard disk cable and reconnect it, and then try to start it. During the boot process, listen to and touch the hard disk with your hands to see if the rotation is normal;

5. Start with other CD-ROMs or USB flash drives, use "fdisk MBR" to try to repair the MBR of the hard disk, or try other MBR repair methods, such as NDD in the previous DOS era. In this regard, you can check the relevant information on the Internet. Note:

Be careful when operating the hard disk with the fdisk command, otherwise you will lose the partition, that is, all the data on the hard disk.

Another way is to fix it by hardhooking it on another machine.

Hope it helps.

Look at the manual, it's not clear here, fn is generally in the lower left corner, and one is in the upper left corner.

It needs to be combined and practical.,There are a lot of keys in the top row that are combined with the fn key for practicality.,Up, down, left and right keys are also combined with it.。

The color of the fn key is different from the others.

In other words, it can be used in combination with keys of the same color on other keys.

It is generally a special feature of the book, such as sleep and hibernation.

And there is. In order to save space on the keyboard, reduce the number of keys and put some keys that are not commonly used together with other keys, similar to the shift key.

It seems that fn is used to switch keypads, anyway, that's how I use it.

Press and hold the fn before you can use the red key on your keyboard.

Hold down the fn and click the key on the keyboard to find the function picture you need, and there are all the drawings on the keyboard.

The default setting of the ThinkPad is to press the function key directly to implement the shortcut function. If you need the FN+ function to implement the shortcut function, you can set it as follows:

1. Enter the control panel. The default is a view like this:

2. Click on the view method in the upper right corner, in order to facilitate viewing, change to a small icon.

3. Click on the "Keyboard" option.

4. In the "Keyboard Properties" dialog box, select "ThinkPad F1-F12 keys". Select the "Traditional" radio box and click the "Apply" button.

Dear Lenovo users, hello!