What s going on with the rice cooker stall going out when it s bright?

When the rice cooker stall is off, it should be a bad contact, which means that the circuit is broken, or it may be that the rice cooker is faulty and the light is broken, thank you.

The water is based on the back of the hand, if it is not over, it means that you have less water, if it is not over, then there is a problem with your rice.

The rice cooker indicator light is really dim and bright, which proves that there is a virtual connection fault in the circuit! Open the bottom lid of the rice cooker and use a multimeter to measure whether the temperature switch is energized.

Rice cooker stall. What's going on when the time goes out? If it's a new rice cooker stall.

When the stone is extinguished, it is bright. It's because the timer of the rice cooker doesn't touch well. To be repaired.

Or maybe it's just that he's working. Bright and sometimes extinguished. You should look at the instructions to judge.

The real name of the ten sides of the rice cooker is because the wiring of the binding post inside is poor, you should check it well, or it may be that there is garbage blocking it.

The electric cooker has the function of automatic constant temperature, when it reaches a certain temperature, it will automatically turn off the power, and it can be automatically turned on when it is lower than that temperature. So the indicator light will be on for a while and won't be on for a while. There is also a possibility, which is poor contact.

Rice cookers and the like often go off and out because the power supply is not in good contact.

In the case of the real name of the rice cooker, it may be that the internal wiring is not in good contact, and it is time to repair it, so you have to take it to a special repair organization or after-sales service point for repair, otherwise it will affect the use.

Look at which rice cooker you use, if you use the beauty of the country, it is normal, because the family is also like this, I also thought it was the same as you, and then I called the company to know which is normal, I hope the landlord does not worry, this is normal!

The rice cooker gear should be where the switch is falsely connected, and you need to check the switch to see if there is a virtual connection.

Rice cooker when sadistic insomnia, what's going on? That means the rice cooker is broken, right? Go to the maintenance department and get it repaired. or bad contact.

The real name of the rice cooker may be that his display bulb contacts are not good enough.

Many tutors do not have good real-name contact. The line may be which piece is not touched, or it is. The grass head is where you check.

The contact is not real, it is the copper sheet inside the button to drink or something that can't be connected, this should be drunk and repaired, and it will be repaired soon when you go to the repair shop.

This is caused by poor contact, so if you can continue to use it, it doesn't matter if you don't repair it for the time being. If it doesn't heat up, it must be repaired. It's not a big problem.

It's good to take it apart and reconnect the diode, it's not difficult.

The electric wok indicator is always on.

I follow your description, after the brake can be closed, indicating that the empty opening is leakage rather than overload and tripping, it has been repaired before, and now it is broken, indicating that it is a problem with the pot. The reason for the problem is that the electric heating wire is not connected with the shell of the pot, and the heating wire expands when it is heated and contacts with the bottom of the aluminum pot, while the shell of the pot is grounded, resulting in leakage and empty opening action. There is no power on the road.

Solution; 1. Adjust the zero line of the rice cooker wiring. 2. Change the heating plate of the rice cooker. 3. The socket fire zero line is reversed.

If the short-circuit point of the electric heating wire is close to the live line, the first.

One or three ways can be solved, and changing the heating plate will definitely solve the problem. I've repaired a similar faulty electric oven. (read your message).

The reason why the rice cooker trips when the rice is not cooked only needs to be replaced by this small component.

According to the phenomenon described, it is possible that the water vapor connection device of the rice cooker is malfunctioning, and it cannot effectively catch the water vapor that spills during cooking, and the water vapor leaks to the socket, causing the circuit breaker to trip.

The circuit is normal, check whether the air switch is heated after tripping.

This is a very simple fault, you can judge the power cord of the pot, if it is not a matter of the line, you have to find a professional repair, this problem is generally caused by the aging of the circuit board or the power supply to the heating plate inside the pot, and it may also be the leakage of the heating plate.

Check your home for short-circuits! Or ask a professional teacher to pay to check it out! I think there are two points, one is that there is a problem with the rice cooker; The second is that the electrical appliances at home are short-circuited!

Try disconnecting the ground wire. If you also trip, it is sure that there is a problem with the electrical appliances! If you don't trip, you also know that the electrical appliance is tripping caused by leakage, and it is better to replace the electrical appliance.

Maybe the fuse is small or something else (such as aging components), in short, there are many reasons for the rice cooker.

Just change the power supply at home to three-phase electricity.

This kind of rice cooker is controlled by electronic temperature control, and after the temperature control is broken, the rice is mistaken for cooked before it is cooked, and the controller will switch to keep warm. It is very likely that the insulation line is short-circuited and the whole family has no power. (There is no electricity at home, so turn on the switch that controls electricity again to have electricity).

I suspect the control board is broken.

From your description and analysis, there is a problem with the switch that tripped, and the switch current is changed to a higher gear. Try again if that solves the problem.

The wires in my house are aging or the electricity is busy, which used to be the case in my house. The computer restarts in 5 minutes to play. Change the time of day or check the wiring at home to see if there is any aging. Just ask an electrician.

It may be because your household appliances have exceeded the rated power, you can check whether the power of your household appliances is too large or use several high-power appliances at the same time Tripping is because of the role of the protective circuit of the rice cooker Because the excessive power is afraid of burning out the total circuit. Therefore, the common solution can reduce the power in the main circuit, that is, reduce the large electrical appliances used at the same time. Most of them don't turn off the plug, if it still doesn't work, you can notify the property management department and check the circuit problem in your home.

See if your rice cooker is temperature-controlled or air-pressure-controlled.

Correspondence checks contact temperature probes and relays. (temperature controlled).

Check whether the pressure-sensing shrapnel is out of order (barometric pressure).

This source is caused by the leakage of electricity in the rice cooker. Please go to the maintenance department to repair it.

Reasons for tripping:

1.Overload. 2.Creepage.

It is recommended to search for "metering socket" on ** to buy a small thing that can detect power consumption, if it is convenient, the process of cooking has been staring, tripping, to see if there is a sudden change in power, if there is, indicating that there is a problem with the heating device, if there is no mutation on the trip, there may be leakage, which is more dangerous, there is a possibility of electric shock.

Short circuit! The voltage of the rice cooker is large...

Question: What you said about changing to another place to cook rice also tripped, may I ask: Are you still behind the gate line in your own home?

In that case, please take it to someone else's house to test it, first judge whether it is a problem with the rice cooker or your home line or load problem, if you don't trip to someone else's house, it is a problem with the pressure cooker, which is easy to judge.

There is a problem with the electrical circuit of the rice cooker I guess you can't do it yourself, please call a maintenance person I have been an electrician for 19 years, and I don't know if I can help you.

I think you should change the rice cooker again, or check the circuitry. (This is not a copy!!

Try changing the safety (vacuum switch) in your home to a 10A.

That must be the problem of the rice cooker, so let's overhaul the rice cooker.

The wiring of your home should be the socket and the lighting are supplied separately, the switch of the socket is jumping, and you look for the electrical box on the wall of your home.

There is a problem with the line you plugged in, you see if the one in the electrical box has jumped.

There are two pieces of the rice cooker's state thick computer board, one to control the lamp of the function of each stool, and the other to control the electric heating material, if it is still heating, whether the wiring is loose, or the lamp is faulty, this book is best to ask someone who will disassemble to check it, if you can continue to cook, then there is no need to repair, it is okay to use it all the time, it is a little inconvenient.

The second-gear line is short-circuited, the electricity is leaking, you cut off the electricity, check the second-gear switch line to see if there is a problem.

If there is leakage in the second-gear circuit, just check the second-gear circuit directly to eliminate it.

Indicates that the switch in the second gear has leakage.

I need to find someone who understands electrical appliances to take a look.

Don't use it blindly.

Safety first.

The second gear lamp or control line has a short circuit to the ground. You can remove the control line of the second gear, and then turn on the light to determine whether it is a trip caused by the grounding of the line.

Although I don't know what's going on, I hope to get a new one, safety is very important, after all, the rice cooker is very cheap, and the new ones are more than 50.

The second gear is leaking, it must be turned off, and quickly find maintenance personnel.

Prove that there is a leakage in the rice cooker, find a pen and test it.

The second gear is leaking, or there is a ground fault.

Explain that there is a leakage in the second gear, and find a professional to see.

This rice cooker needs to be checked before it can be used.

Hurry up and repair, there may be ** leakage.

It may be voltage-related or leakage.

First, find out the fault first.

1.Put a cup of cold water in the pot first, plug it in, press the heating (cooking) button switch, and see if the indicator light is on? If the indicator does not light up, there is a problem with the power cable, indicator circuit, or switch control part.

At this time, it is necessary to check whether the inner core of the power cord is aging and broken. In particular, the rice soup that spills out when cooking porridge is easy to fall on the plug, which often leads to poor contact between the power plug and the latch.

2.Water can be heated, indicating that the electric heating plate is good; If the water cannot be heated, the heating plate is faulty. According to maintenance statistics, the probability of failure of the electric heating plate is low.

3.As the water temperature in the pot continues to rise, when there are small bubbles rising in the water (the water temperature is about 70), lift the button switch up by hand to see whether the indicator light is on and off, and judge whether the insulation switch is working normally. The normal state is that the indicator light turns off from on, and after a few minutes, it turns on and off again, and repeats repeatedly.

If the light keeps on or off, the thermostat is faulty.

4.Continue to press the button switch to let the water in the pot continue to heat, from 70 to 100, the water vapor will start to evaporate, when it is completely evaporated and dry, the temperature will rise to 103 2. A "click" sound will be heard, the temperature limiter will quickly cut off the power supply, and the indicator light will go out immediately, which means that the temperature limiter is working normally.

If you hear a "click" sound in about 1 minute after the water in the pot has evaporated and dried, and the indicator light does not go out, it means that there is a problem with the thermostat.

The rice cooker I use should press the function type key to be selected, such as pressing the button for cooking rice, and it will run automatically.

Is it that the rice cooker has been burned due to too much current, take it to the repair shop to see.

It is estimated that the contact is not good, and it is not disassembled, so it is not easy to return.

Explain that your computer bag has had a reaction for years.

Is the cable connecting to the rice cooker loose, or the power is out at home?

If the rice cooker is just plugged in and the display screen goes out and there is no other reaction, it is usually a broken line and can be repaired.

The rice cooker is going to break, sometimes it will be like this. Only replaced, generally not repaired.

It's the rice cooker that the "magnet" is broken, so let's replace it! Of course, the same will happen if something sticks to the bottom of the rice cooker.

It should be that the spring in the control position is broken.

If the magnetic buckle is broken, the temperature sensing magnet is broken.

There are several possibilities when the cooking time is going, one is that it has entered the heat preservation mode, the other is that the rice is cooked, it may be that you think it is cooked, the rice cooker is not a person after all, and it may make the rice cooked more evenly in the setting, and the third is that you can set the time before cooking. Pure hand-typed, please adopt it.