Honor 6 free WiFi has a hotspot that can t be connected

If your phone can't connect to a free wifi hotspot, it should be caused by a weak wifi signal source and an unstable connection.

You can find a place with a better signal and try it, and you should be able to connect to it.

If you have broadband installed at home, you don't need to use any free wifi at all, and that thing is not safe.

This portable wifi can support desktop computers and all-in-one computers, as well as laptops, which is very convenient.

And the signal is also very strong, the general portable wifi has not been improved in this convenience, which is really disappointing.

And the features have also been added a lot,**Basically, it hasn't changed much, it's all about the same price.。

The reasons and solutions for the HUAWEI mobile phone WiFi hotspot cannot be connected are as follows:

Cause of the problem

Check that the data service of the mobile phone that shares the Wi-Fi hotspot is available.

Make sure that the phone that shares the Wi-Fi hotspot has device restrictions set.

Confirm that the Wi-Fi hotspot information is correct.

Solution:

Please try to turn off the Wi-Fi switch of the shared Wi-Fi hotspot mobile phone, and use the data traffic of the mobile phone to surf the Internet to confirm whether the data service function is normal.

Please turn off Wi-Fi sharing on the sharing side and turn it on again, and turn it on again after turning off Wi-Fi on the receiving hotspot phone.

Please re-enter the hotspot password and try again.

Because the hotspot module of the mobile phone is faulty, you can restart the hotspot setting in the settings, and the specific operation steps are as follows:

Tools needed: Huawei Honor 9

Take Huawei Honor 9 as an example, the steps are as follows:

1. Turn on the Huawei Honor 9 phone, find the personal hotspot in the phone settings and touch it, as shown in the figure below

2. Find the hotspot configuration in the personal hotspot and click to enter, as shown in the following figure

3. Then enter the name and password of the reset set, and click Done, as shown in the figure below

4. Then click to turn on the hotspot, as shown in the figure below

If you are using a Huawei phone.

If you can connect to Wi-Fi but can't access the Internet, you can use the following methods to troubleshoot:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please try to re-destroy the delay and turn on the WLAN switch connection;

Follow the on-screen prompts to restore. (Note: This action will delete the WLAN and Bluetooth connection records).

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If you are unable to access the Internet

Enter Traffic Management and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications, and it is recommended to check all the WLAN permissions that need to be used for applications.

If the above methods do not resolve the issue, we recommend that you back up your data.

The mobile phone is turning on the hotspot when the mobile data is turned on, and there is no wifi, so it can't be connected.

Here's why:

2. The wireless switch is not turned on, the notebook generally has a hardware switch for the wireless network, and the keys of each notebook will be different, usually three arc-shaped icons, which can be turned on according to the icon.

3. Because of the driver problem, the driver of the wireless network card will not be able to find the signal, and the driver only needs to be reinstalled to solve it.

4. Because the notebook does not have a wireless network card function, it is impossible to connect to the mobile phone hotspot.

Mobile phone WiFi hotspot is a technology that converts the GPRS, 3G or 4G signal received by the mobile phone into a WiFi signal, so that mobile phones, tablets or laptops and other portable devices can be connected to the Internet outdoors or in places without networks through wireless network cards or WLAN modules, so as to achieve network resource sharing. The mobile phone must have a wireless AP function to be used as a hotspot, and most smartphones come with a hotspot function.

Wireless access to WiFi hotspots has become a standard way for many devices to access the Internet. If you carry a portable device that supports Wi-Fi when you go out, such as PSP, iPad Wi-Fi, etc., you have great restrictions on accessing the Internet at any time, and you must find a place that provides free Wi-Fi hotspot network, such as Starbucks, McDonald's, Village Base or a designated area of the hotel to access the Internet.

This directly limits the significance of portable devices to be portable, and at the same time, these devices do not have network access conditions such as 3G or GPRS, so is it impossible to access the Internet at any time? In fact, as long as you have a mobile phone with Android system, you can turn your mobile phone into a WiFi hotspot through GPRS network wireless Internet access, and then turn on the iPad, you can let the iPad go online at any time, which is very convenient.

Summary. Dear, hello, I'm glad to answer for you: Honor mobile phone wifi can't turn on the answer situation.

2.After making sure your phone is within Wi-Fi coverage, tap "Scan" to refresh the Wi-Fi list. 3.

Connect the computer to the router through a network cable and log in to the router's management interface. 4.In Wireless Settings - Basic Settings, the channel is between 1 11, the wireless function is turned on, and the router is restarted.

2.Make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function. Circumstance.

3. What should I do if the wireless connection is successful and I can't open the web page? 1.First of all, check whether the router is connected to the external network, log in to the router management interface, and see whether the WAN port parameter is non-0 at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2.Manually set the IP static address; Press and hold the signal name of the corresponding wireless router and select Modify Network. 3.

Select Advanced settings. 4.Click on IP Settings and select Use Static Manual IP Entry.

After the setting is successful, you can generally open the web page.

The wifi on the Honor phone cannot be turned on.

Dear, hello, I'm glad to answer for you: Honor mobile phone wifi can't turn on the answer situation.

2.After making sure that the phone is within the wireless network coverage, click "Scan" to refresh the wireless network list. 3.

Connect the computer to the router through a network cable and log in to the router's management interface. 4.In Wireless Settings - Basic Settings, the channel is between 1 11, the wireless function is turned on, and the router is restarted.

Circumstance. 2. What should I do if I find a wireless signal and the connection is unsuccessful? 1.The unsuccessful wireless connection may be caused by incorrect settings such as the wireless password, and the key is re-entered.

2.Make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function. Circumstance.

3. What should I do if the wireless connection is successful and I can't open the web page? 1.First of all, check whether the router is connected to the external network, log in to the router management interface, and see whether the WAN port parameter is non-0 at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2.Manually set the IP static address; Press and hold the signal name of the corresponding wireless router and select Modify Network. 3.

Select Advanced settings. 4.Click on IP Settings and select Use Static Manual IP Entry.

After the setting is successful, you can generally open the web page.

How to connect to HONOR mobile phone wifi deactivated?

Dear, it is recommended that you try to restore your phone to factory settings, it may be a problem with your phone settings.

The reasons and solutions for the HUAWEI mobile phone WiFi hotspot cannot be connected are as follows:

Cause of the problem

Check that the data service of the mobile phone that shares the Wi-Fi hotspot is available.

Confirm that the phone that shares the Wi-Fi hotspot has device restrictions set.

Confirm that the Wi-Fi hotspot information is correct.

Solution:

Try turning off the Wi-Fi switch on the Wi-Fi hotspot phone and use the data data of the phone to check whether the data service function is normal.

Please turn off Wi-Fi sharing on the sharing side and turn it on again, and turn it on again after turning off Wi-Fi on the receiving hotspot phone.

Please re-enter the hotspot password and try again.

Please check that the Wi-Fi function is enabled on the mobile device you want to connect to the hotspot, and that the hotspot name and password are correct on the Wi-Fi list page.

Please ensure that the number of devices connected to the mobile hotspot does not exceed the set value, for example, the maximum number of connections is set to 8 users, if 8 devices have been connected, other devices cannot be connected.

Please modify the connectable devices in the list of managed devices to any device attempt.

Huawei mobile phone can be connected to wifi to access the Internet, turn off the wifi traffic can not be used, idle two like this repair.

How to deal with the personal hotspot of the Android phone that cannot be added: 1. Check whether the data network of the mobile phone is normal; 2. After turning on the personal hotspot, turn off the wifi, then turn off the personal hotspot, and then turn the personal hotspot back on, and repeat the attempt; Third, the opening method is wrong, it is estimated that the Bluetooth method is selected, please use the wireless way; 4. Backup and restore factory settings; 5. Backup data upgrade system.

Check whether the password entered is correct, click to show the password to see;

See if the router has set up MAC address filtering or the MAC address filtering policy is selected incorrectly, if this is the reason, you can correct it;

Generally, the router will set the "maximum number of connections", so the reason for this situation may be that the router is "full", just change the data set.

It is recommended that you change the router password regularly, and it is not recommended that you use "wifi password cracking" and other similar applications, the password of wap wpa2 is currently no one can crack, the so-called "cracking" is actually password sharing, you get the password of someone else's router from the server, and the password of your router will also be contributed.

Send it back to the manufacturer for repair, it may be that the internal parts are damaged.