2014 Consulting Engineer Exam Exam Recommendations?

The first time that the Consulting Engineer Exam Preparation Experience: A Collection of Self-learning Methods has collected and sorted out the most complete tutoring for you, I wish you a successful passage of the Consulting Engineer Exam!

Abstract learning method.

In the process of self-study, summarizing while studying is a good way to improve learning efficiency. When doing synchronous practice questions and self-test questions, it is important to proofread and correct the usual summaries. It contributes to the deepening of knowledge.

Logical taxonomy.

In the self-examination review stage, you can appropriately break the restrictions of the textbook chapters, and compile a relatively concise logical relationship chart according to the logical structure of the whole book, which is a good way to review the systematization of knowledge.

Expand the problem.

Many review reference books have multiple-choice questions, which are relatively large in number and have a large coverage. Therefore, when doing multiple-choice questions, it is necessary to comprehensively consider the knowledge points contained in the questions, the interrelationships and possible variations, which will help to complete the review quickly.

Argumentative questioning.

The spark of truth will shine brighter in the collision; Proper arguments will deepen in memory. You may wish to argue and ask more questions among your classmates.

Repetitive learning method.

Empathy.

In self-study, don't always think of yourself as a "student" and be in a passive position; Instead, you should constantly put yourself in the position of "sir", take the initiative, and generate different ideas.

Role reversal method.

When self-learning a profession, such as accounting, don't just think of yourself as a test taker's practice topic, but imagine yourself as a senior accountant who is doing the accounting for the company. In this way, you will apply what you have learned and benefit the exam.

Cross-application method.

The multi-faceted and multi-disciplinary application of knowledge will stimulate greater effect on the learning of this course. This has been a successful approach in the history of science.

Classical Guidance.

In self-study, you will often encounter confusion. This requires the use of the theoretical knowledge of the classical disciplines that one has learned, such as Marxist dialectical materialism, logic, psychology, etc., to guide practice.

Focus on grasping the law.

A good self-examinee never guesses a question. However, it is feasible to focus on the test center before the test. Just three to five days before the exam, focus on understanding the key points and difficulties of the subject. If you have a lot of content and can't remember it, you can choose the "top priority" and memorize it strongly, and you will gain something.

To understand the textbook and syllabus, you must first know what to take.

Take a moment to read the textbook before the exam.

Take the time to do a few sets of mock tests.

Past questions are a must-do, you can understand the difficulty of the exam, the rules of the questions, and master some answering skills.

Anyway, the exams are mainly based on textbooks and do more exercises.

I personally recommend 2 3 3 online schools, the materials and real questions are quite complete, anyway, there are more than 20 days before the exam, so take some time to review it every day.

The difficulty of consulting an engineer in 2023 is as follows:1. Subject difficulty: two stars.

There are four subjects in the consulting engineer examination: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices". The Macroeconomic Policy and Development Plan mainly includes the Hongqingyuan economic policy and the national development plan.

2. Difficulty: three stars.

Among the four examination subjects, the question types of "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", and "Project Decision Analysis and Evaluation" are multiple-choice questions and multiple-choice questions, and the question types of "Modern Consulting Methods and Practice" are 6 comprehensive questions. Multiple-choice questions focus on the ability to comprehend knowledge.

3. Overall difficulty: three stars.

On the whole, the difficulty of the consulting engineer to answer the blind test is not high. As long as everyone prepares well and answers the questions carefully in the exam room, then you can pass the exam smoothly. In addition, there is another point, that is, the results of the consulting engineer exam are valid for 4 years, and the subjects that have passed do not need to be retaken, and the subjects that have not been passed can be taken as long as you have taken the exam within 4 years.

Exam Preparation Tips:1. Textbook first and then questions: In principle, the premise of the exercise should be familiarity with the content.

2. Introduce the knowledge points of the textbook through the past questions.

3. Choose the test questions carefully.

Skillfully grasp past past questions

There is a famous saying in the consulting engineer examination industry that "the heavy is always heavy", that is, the key content of the consulting engineer examination is basically fixed, although it changes every year, but the main content involved is basically unchanged, and more than 70% of the knowledge points examined are the consulting engineer examination has been tested or repeatedly tested in the past five years (except for the new knowledge points). And there are also duplicate original questions.

For the consulting engineer exam, the role of past papers is quite prominent, and we must have enough understanding of it - treat the past papers well. It should be said that the past questions are the essence of the consulting engineer exam, which shows the knowledge points within the scope of the consulting engineer exam in the form of questions, which is also the crystallization of the wisdom of proposition experts.

Through the analysis of the key points of the question, readers can understand the meaning of the relevant content, learn to analyze the problem from the perspective of the proposer, find the entry point, and cultivate the "sense of the question".

How do I use the textbook?

1. Don't fantasize about reviewing textbooks once and for all, and be sure to spend your own effort to take notes and integrate materials.

2. Look repeatedly, remember, remember, and remember.

3. First look at it line by line and sentence by sentence, then look at the key points of self-drawing, and then look at it in series with yourself.

4. Achieve systematization and clarity of knowledge through the comparison of knowledge points before and after.

5. After that, you will disrupt your original framework structure by doing questions, clear to vague, and then from vague to clear, and then from vague to clear, and only after such a process will you be able to use freely and flexibly use knowledge points.

6. In principle, the "three major books" shall prevail on the disputed issues, unless the textbooks are obviously contrary to the provisions of the law.

7. The consulting engineer exam is an exam-oriented education, and it is bound to take a lot of time to read the textbooks, so for some partial legal subjects, it is completely possible to focus on the law.

Big taboo

1. The concept of holistic and systematic learning is wrong, and students should not always force themselves to form a chapter or textbook knowledge point system in their minds when studying. Emphasis should be placed on memorizing "points" rather than "faces".

2. It is not advisable to do the questions without a specific purpose, most candidates do all the new and old questions when reviewing, in fact, this not only wastes a lot of time, but also causes other subjects, especially cases, to have no time to practice. It should be done with a targeted multiple-choice set of questions.

There are generally 2 or more correct answers for multiple choice questions in the consulting engineer exam, all of which are correct to get full marks, less choices and correct answers are selected to get the corresponding scores, and multiple or wrong choices are not scored.

1. The examination time of "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", and "Project Decision Analysis and Evaluation" is 150 minutes; The duration of the exam is 180 minutes.

2. The question types of "Macroeconomic Policy and Development Planning", "Project Organization and Management", and "Project Decision Analysis and Evaluation" are unified as follows: 60 multiple-choice questions, 35 multiple-choice questions; Modern Consulting Methods and Practices: 6 comprehensive questions.

3. The full score of the four subjects of the consulting engineer examination is 130 points.

1. Elimination method.

Consulting engineer multiple-choice questions are all two or more answers are correct, and the interference (wrong terms) is at most two, so it is most common to use the elimination method when encountering this question. Eliminate the options that you don't think are the right ones, and the rest are options.

2. Analogy.

If one of the options doesn't fall into the same category, the remaining three are options. If two options cannot be classified, one of the options will be selected as the choice of their own potato according to the preferential method.

3. Speculation.

Use context to guess the meaning of words. Some consulting engineers have to start from the structure and grammatical knowledge of the sentence, and use the common sense they have accumulated to judge the meaning of the sentence and deduce the logical conditions and conclusions, in order to accurately select the correct option.

4. Exclude the wide sock method.

If you can't be sure of the correct answer, you can use the elimination method to eliminate options that are not the correct answer. According to the scoring rules, only the most secure option is selected, so that you can score fewer points, but you can avoid losing points due to the wrong selection.

Whether it is necessary to take the exam for consulting engineers is mainly based on the industry, time and energy that the individual is engaged in, and cannot be generalized. Dressed up.

1. It is recommended for those who are engaged in the engineering consulting industry to apply for the examination, which is helpful to the profession.

2. For those who are not engaged in the industry and want to develop in the industry, they can apply for the examination.

3. Friends with more energy and time can apply for the exam.

The subjects of the Registered Consultant Examination are divided into five subjects: "Macroeconomic Policy and Development Planning", "Organization and Management of Engineering Projects", "Decision-making Analysis and Evaluation of Projects", and "Modern Consulting Methods and Practices".

The knowledge points of the consulting examination are relatively wide, and the macro economy, project decision-making, procurement and bidding process management, project budget management, financial benefit evaluation, etc. should have a deeper grasp, and the actual examination rate of the consulting engineer examination is the pass rate. The difficulty is there.

But there are still people who pass every year. This requires finding the right direction, making up our minds, and working hard. In addition, it is necessary to have a basic understanding of the content, scope, scoring rules and question types of the test.

Be aware of it, and review it will be more targeted. Make a plan to revise for the exam, step by step, and you will definitely be able to pass the exam.

The Certified Consulting Engineer examination is held once a year, and the examination time is generally arranged in April, and in principle, only the examination center is set up in the provincial capital. The examination subjects of the registered consulting engineer are "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Analysis and Evaluation of Project Decision-making", and "Modern Consulting Methods and Practices".

Registered Consulting Engineer Examination Subjects

Macroeconomic Policy and Development Planning: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, 78 points pass;

Engineering Project Organization and Management: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, and 78 points are qualified;

Project Decision Analysis and Evaluation: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, 78 points pass;

Modern Consulting Methods and Practices: 6 subjective questions; The exam lasts 180 minutes; The total score is 130 points, 78 points pass;

Consulting engineers can take the exam for 4 years, and the results of the consulting engineer exam are managed on a rolling basis for a cycle of 4 years. Hail personnel who take all four subjects must pass all subjects within 4 consecutive examination years; Those who are exempted from some subjects must pass the examination subjects within 2 examination years.

The examination subjects of Registered Consulting Engineer include "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices".

The Registered Consulting Engineer (Investment) Qualification Examination Certificate implements a regular registration system, and the qualification certificate is registered once every 3 years. Holders of qualification certificates shall go through registration procedures with their designated institutions in accordance with relevant regulations.